Australian National Testing Laboratories Pty Ltd

Site

Australian National Testing Laboratories Pty Ltd

Accreditation No.

15698

Site No.

16850

Date of Accreditation

08 Nov 2007

Address

Unit 17, 15 Suscatand Street
Rocklea, QLD 4106
Australia

antl.com.au

Contact

Mr Richard James Unwin P: +61 (07) 32740737

Availability

Services available to external clients

Scope of Accreditation

ISO/IEC 17025 (2017)

Infrastructure and Asset Integrity

Service Product Determinant Technique Procedure Limitations
Evaluation of mechanical performance of pressure plant, pipelines and equipment Hose and hose assemblies; Waste disposal fittings Abrasion resistance; Ageing; Burst pressure; Dimensional stability; Dispersal rate of a hose reel discharge; Distortion; Ease of opening a nozzle, other than a twist nozzle, to the open position; Ease of turning a twist nozzle to the open position; Expansion; Flexibility; Flow rate of a hose reel; Hose reel assembly pressure; Hydrostatic pressure; Load appraisal of inspection opening and access cover; Pressure loss due to friction; Serviceability after kinking; Strength of assembly Not applicable

AS 1180.5; AS/NZS 1221 clauses 2.2.2.2, 2.2.2.3, 3.2.1, 3.2.2.1, 3.2.2.2, 3.2.2.3, 3.2.3, 3.2.4.2, 3.2.4.3, Appendices B, C, D, E, F, G; AS/NZS 2554 clauses 1.6, 2.2.1, 2.2.2, 2.2.3, 2.2.4, 2.3, 2.4, Appendix B; AS 2792 clauses 3.1.2, 3.1.3, 3.1.4, 3.1.5, 3.1.6, 3.1.7, 3.3.1, 3.3.2, 3.3.3, Appendices E, F, G, H, I, K, L, M 

ISO/IEC 17025 (2017)

Manufactured Goods

Service Product Determinant Technique Procedure
Evaluation of electrical appliances and devices - Performance Water heaters Distribution temperature; Electrical energy consumption; Overflow; Pressure measurement; Strength and dimensions of components; Temperature control; Torque Not applicable

AS 3498 Section 7.2, Appendices A, B, C; AS/NZS 4692.1 Sections 2.2.2, 2.2.3, 2.2.4, 5.2.1, 5.2.3, 5.3, 5.5.2.1, 5.6.5; AS/NZS 6400 Sections 2.1, 2.1.4, 2.2, 2.2.4, 2.3, 2.3.4, 2.4, 2.4.4, 2.5, 2.6,2.6.4, 2.7, 2.7.4

Products and appliances connected to the water supply - Physical evaluation Baths, sinks and basins Endurance; Flow rate; Flush performance; Leak tightness; Spread angle; Strength of assembly; Thermal distortion Not applicable

AS/NZS 3662 clauses 5.4.1, 5.4.2, 5.4.3, 5.4.4, 5.5, 5.6.1, 5.6.2, Appendices B, C, D, E, F (2005); AS/NZS 3662 clauses 5.5.1, 5.5.2, 5.5.3, 5.5.4, 5.6, 5.7.1, 5.7.2, Appendices B, C, D, E, F; AS 3982 clauses 1.6.1, 1.6.2, 1.6.3, 1.6.4, Appendices A, B, C, D; AS 4775 clauses 6.5.1, 7.3.1, 8.3; AS/NZS 6400 clause 2.1.3

Food waste disposal units Air gap; Back flow; Degree of fineness (FWDU); Drainage Not applicable

WMTS 5200.028 clauses 9.1, 9.2, 9.3, 9.4

Sanitary fixtures - Urinals, water closet pan/suites, bidets, douche seats, cisterns and purpose built bathroom modules Discharge; Flush performance; Flush volume; Hydraulic strength; Leak tightness; Leakage; Load; Splash; Wetting Not applicable

AS 1172.1 clauses 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, Appendices A, B, C, D, E, F, G, H; AS 1172 clauses 4.2, 4.3, 4.7, Appendices A, F; AS 1976 clauses 5.2, 5.3, 5.4, Appendices A, B, C; AS/NZS 3662 clauses 5.1, 5.2, 5.3, 5.4, 5.5, Appendices B, C, D, E; AS/NZS 3982 Appendices A, B, C, D; WMTS 5200.051 clause 9.2, Appendix B 

 

Tap assemblies; Valves Back flow; Bending properties; Closing pressure; Compatibility; Dimensions; Distortion; Endurance; Flow rate; Functionality; Hydrostatic pressure; Leak tightness; Leakage; Load; Pressure; Seal integrity; Spread angle; Strength of assembly; Thermal cycling; Torque Not applicable

AS 1357.2 clauses 3.2, 3.3, 7.2, 7.3, 7.4, 7.5, 9.4, Appendices E, L, M, N, V, W; AS 1628 clauses 4.2, 4.3, 4.4, 4.5, 5.6, Appendices B, C, D; AS 1910 clauses 4.2, 4.3, 4.4, Appendices C, D, E; AS 2419.2 clauses 4.3.2, 4.3.3, 4.3.4, 4.3.5, 4.3.6, Appendices D3, D4, D5, D6, D7; AS/NZS 2638.1 clauses 5.1.2, 5.1.3, 5.1.4, 5.1.5, 5.1.6, 5.1.7, 5.1.8, 5.1.9, 5.1.10, 5.1.11, 5.1.12; AS/NZS 2638.2 clauses 3.2, 3.3, 5.1.1, 5.1.2, 5.1.3, 5.1.4, 5.1.5, 5.1.6, 5.1.7, 5.1.8, 5.1.9, 5.1.10, 5.1.11, 5.1.12, 5.1.13, 5.1.14, 5.1.15; AS/NZS 2845.1; AS 3498 Appendices A, B; AS/NZS 3718 clauses 43.11, .3, 4.5, 4.6.2, 4.8, 4.9, 4.10, 4.11, 4.12, 4.15, Appendices D, F, G, H, I, J, K, L, M, Q; AS 3952 clauses 3.3.1, 3.3.3, 5.1.1, 5.1.2, 5.1.3, 5.4.1, Appendix A; AS 4032.1 clauses 4.3, 4.4, 4.5, 4.6, 4.7, 4.8, 4.9, 4.10, Appendices D, E, F, G, H, I, J; AS 4032.2 clauses 3.2, 3.3.1, 3.3.2, 3.4, 4.4, Appendices C, D, F, G; AS 4794 clauses 5.1.2, 5.1.3, 5.1.4, 5.2.2, 5.2.3, 5.2.4, Appendices D, E; AS 4795 (2006) clauses 5.2.1 Test A, 5.2.2 Test B, 5.2.3 Test C, 5.2.4 Test D, 5.2.5 Test E, 5.2.6 Test F; AS 4796 clauses 4.2, 4.3, 4.4.1, 4.5, 4.7, 4.8, Appendices E, F, G, H, I; AS 5081 clauses 5.2.2, 5.2.3, 5.2.4, 5.2.5, 5.2.6, 5.3,2, 5.3.3, 5.3.4, 5.3.5, 5.3.6, 5.3.7, 5.3.8, 5.3.9; AS/NZS 6400 clause 2.6.3;  WMTS 5200.006 clauses 8.1, 8.3, 9.1, 9.2, 9.3, 9.4, Appendix A; WMTS 5200.012 clauses 9.2, 9.4.1, Appendices B, C; WMTS 5200.030 clauses 9.3, 9.4, Appendix C; WMTS 5200.037.2 clauses 8.1, 9.2, 9.3, 9.4, Appendices B, C, D, F; WMTS 5200.053 clause 9; WMTS 5200.460 clause 9.1; WMTS 5200.467 clauses 8.1, 8.3, 9.1, 9.3.2, 9.4; WMTS 5200.476 clauses 9.1,9.2; WMTS 5200.477 clauses 9.2, 9.3, 9.4, 9.5, Appendices B, C, D; WMTS 5200.481 clauses 9.2, 9.3, 9.4.1, 9.4.2, 9.4.3, 9.5, Appendices B, C; ISO/EN 817 clauses 8.3, 8.4, 8.5, 8.6, 8.7, 9.4, 9.5, 10.2, 10.4, 10.5, 10.6, 10.7, 11.2, 12.1, 12.2, 12.3, 13, Annexes A, B; ISO 5208 clauses 4.8, 4.9, 4.10, 4.11, 4.12

Water service products - Connectors, filters, fittings, hoses and pipes Air gap; Air separation distance; Bending properties; Compatibility; Crack propagation; Dimensions; Endurance; Flow rate; Functionality; Impact resistance; Joint strength; Leak tightness; Leakage; Load; Ovality; Pressure; Pressure cycling resistance; Rigidity; Seal integrity; Sliding fit; Socket fit; Strength of assembly; Thermal cycling; Thread form evaluation; Torque Not applicable

AS/NZS 1260 clauses 3.2.1, 3.2.2; AS 1432 clauses 4.3, 5.4.2; AS/NZS 1462.1 clauses 7, 8, 11; AS/NZS 1462.4, AS/NZS 1462.6; AS/NZS 1462.8; AS/NZS 1462.10; AS/NZS 1462.11; AS/NZS 1462.13; AS/NZS 1462.17; AS/NZS 1462.24; AS/NZS 1462.29; AS/NZS 1477 clauses 3.3.1, 3.3.3, 3.3.6, 3.4.1(b), 3.4.2, 3.4.3, 3.4.4, 3.5.1, 3.5.2; AS 1571 clause 8.2; AS 1589 clauses 1.7.4, 1.7.5, 1.9.2, 1.10, 1.13.3 up to DN 80, 3.3.1, 3.3.2, 3.3.3, 3.3.4, 3.3.5, 3.4.1, 3.4.2, 3.4.3, 3.5.1, 3.6.1, 4.9.1, 4.9.2, Appendices E, G, H;  AS 1926.3 clauses 5, 6.1, 6.2, Appendices A5.1, A5.2, A5.3, A5.4, B; AS 2280 clauses 2.5.2, 3.1, 3.1.1, 3.1.2.1, 3.1.2.2, 3.1.2.3, 3.1.2.4, 3.5.2.1, 3.5.2.2,4.2.2, Appendices F, H; AS 2419.3 clauses 4.2, 4.2.3, 4.2.3, 4.3, 4.3.2, 4.3.3, 4.3.4, 4.3.5, 4.3.6; AS/NZS 2492 clauses 3.8, 3.9; AS/NZS 2642.3 clauses 12.2.1, 12.2.2, 12.2.3, 12.2.4, 12.2.5, 12.2.6, 12.2.7, 12.2., AS 2887 clauses 2.6.1, 2.6.3, 2.6.5; AS 2888.1; AS 2888.2; AS 2888.3; AS 2888.4; AS 2888.5; AS 2888.6; AS 2888.7; AS 2888.8; AS 2888.10; AS 3499 Clauses 8.2, 8.4, 8.5, 8.8, 8.9, Appendix C; AS 3518 (2004); AS 3688 clauses 3.2, 3.4, 3.5, 3.6, 3.7.1, 3.7.2, 3.8, 4.2, 4.3, 4.4, 4.5, 4.6, 4.7, 4.8, Appendices C, D, E, F, G, H, I, J, K, L; AS/NZS 4129 clauses 1.8, 1.13.1, 1.13.2, 2.4.2, 2.4.3, 2.4.4, 2.4.5, 3.4, 3.5, 4.4.2, 4.4.3, 4.4.4, 4.4.5, 4.4.6, Appendices D,E; AS/NZS 4130 clauses 9.1, 10.1, 10.2, 10.4; AS/NZS 4327 clauses 4.1, 4.2,Appendices B, C, D, E, F; AS/NZS 4401 clauses 6.2, 6.3, 6.4, 7.2, 8; AS/NZS 4441 clauses 10, 11.1.1, 11.1.2, 13.2, 13.3, 13.4; AS/NZS 4765 clauses 3.2.3, 3.2.4, 3.2.7, 3.2.8, 3.2.9, 3.2.10, 3.3.1, 3.3.2, 3.3.3, Appendices B, D, E; AS/NZS 4793 clauses 4.1.2, 4.1.3, 4.1.5, 4.1.6, 4.4.1; AS/NZS 4798 Clause 3.3, 3.4, 3.5.1, 3.5.2, 4.2, 5.2, 5.3, 5.5, 5.5.5; AS/NZS 5065 clauses 3.3.1, 3.3.2, 3.4.1, 3.4.2, 3.4.3, 5.2; AS 5082.2 clauses 12.1, 12.2, Appendices C, D, E, F, G, H; AS/NZS 6400 clause 2.7.3; WMTS 5200.040 clause 9; WMTS 5200.053; WMTS 5200.475 clauses 9.2, 9.3, Appendices B, C; WMTS 5200.477 clause 9.4, Appendix C; WMTS 5200.482; EN 713; EN 714; EN 1053; EN 1054; EN 1055; EN 12293; EN 12294; EN 12295; ISO 1167.1;  ISO 1167.2; ISO 1167.3; ISO 1167.4;; ISO 3126; ISO 3459; ISO 3501; ISO 3503; ISO 13257; ISO 13844; ISO 13846; ISO 13954; ISO 13955

Water treatment appliances and systems Burst pressure; Endurance; Hydrostatic pressure; Strength of assembly Not applicable

AS/NZS 3497 clauses 5.2, 5.3, 5.4; WMTS 5200.103 clauses 9.2, 9.3, 9.4; WMTS 5200.104 clause 9.3; WMTS 5200.105 clause 9.3

ISO/IEC 17025 (2017)

Materials

Service Product Determinant Technique Procedure
Metallic corrosion evaluation Copper and copper alloys Dezincification resistance Classical

AS 2345 Appendix C

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.