SRG Global Asset Care Pty Ltd

Site

Brisbane Mechanical Testing Laboratory

Accreditation No.

218

Site No.

852

Date of Accreditation

07 Oct 1970

Address

7 Brisbane Road
Riverview, QLD 4303
Australia

srgglobal.com.au

Contact

Mr Keith Ireland P: +61 (07) 38165581

Availability

Services available to external clients

Scope of Accreditation

Print scopes
Brisbane Mechanical Testing Laboratory

ISO/IEC 17025 (2017)

Manufactured Goods

Service Product Determinant Technique Procedure Limitations
Material performance evaluation of elastomers, plastics and composite products Prepared test specimens Tensile properties Not applicable

AS 1145.1, 

ISO 13953

0.2 kN to 250 kN
Tear resistance Not applicable

ISO 13954; 

ISO 13956
Bending properties Not applicable

ASME IX QF 143.2,

ISO 21751, 
Material performance evaluation of metal products Prepared metallic test specimens Microhardness Vickers

AS 1817.1, 

ASTM E384

0.245 N to 9.8 N
Bending properties Not applicable

AS 2505.1, 

ASTM A370, ASTM A1058, ASTM E290, 

ISO 7438, 

Lloyds - Rules for the manufacture, testing and certification of materials Chapter 2 Section 7
Hardness Vickers

AS 1817.1, AS 4291.1, 

AS/NZS 4291.2, 

ASTM E92, ASTM F606, 

ISO 898-1, ISO 898-2, ISO 6507-1

9.8 N to 490 N
Hardness Brinell

AS 1816.1, 

ASTM A370, ASTM A1058, ASTM E10, 

ISO 6506-1

2.45 kN to 29.4 kN 
Impact resistance Charpy - Assessment of fracture appearance; Charpy V-notch - Impact value

AS 1544.2, 

ASTM A370, ASTM A1058, ASTM E23, 

ISO 148-1

from 40°C to -101°C and -196°C
Tensile properties Longitudinal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse tensile

AS 1391, 

ASTM A370, ASTM A1058, ASTM E8M,

ISO 6892-1, 

For the purpose of determining compliance with:

Lloyds - Rules for the manufacture, testing and certification of materials Chapter 2 Section 2

0.2 kN to 1000 kN
Hardness Rockwell - Scale A; Rockwell - Scale B; Rockwell - Scale C

AS 1815.1, 

ASTM A370, ASTM A1058,
Reinforcing bar and steel prestressing materials for concrete Bending properties; Proof load; Shear strength Not applicable

AS/NZS 4671, 

ISO 15630-1, ISO 15630-2
Threaded fasteners, bolts and nuts Proof load Not applicable

AS 4291.1,

AS/NZS 4291.2, 

ASTM F606, 

ISO 898-1, ISO 898-2

0.2 kN to 1000 kN
Breaking load Not applicable

AS 4291.1, 

ASTM A370, ASTM A1058, ASTM F606, 

ISO 898-1

0.2 kN to 1000 kN
Welded test specimens Bending properties Longitudinal guided bend; Reverse bend; Tongue bend; Transverse free bend; Transverse guided bend; Transverse joggle-butt wrap around bend

ANSI/AWS D1.1 Section 4,

AS/NZS 2205.3.1; AS 2205.3.2; AS/NZS 2205.3.3; AS 2205.3.4,

ASME IX Article IV QW-466,

ASTM E190,

AWS B4.0 clauses 6.1,6.2, 6.3, 6.4, 6.5, 6.6, 6.7, 6.8, 6.9, 6.10,

ISO 5173,

For the purpose of determining compliance with:
ANSI/AWS D1.1 Section 4,
ASME IX Article IV QW-466,

DNV Rules for classification of ships/high speed, light craft and naval surface craft - Part 2 Chapter 1 Section 3, Part 2 Chapter 3 Section 5, Part 2 Chapter 4 Section 8,

Lloyds - Rules for the manufacture, testing and certification of materials Chapter 12,

 including examination of fractures
Hardness Brinell

AS 1816.1, 

ISO 9015-1

2.45 kN to 29.4 kN
Shear strength Not applicable

AS/NZS 1554.3, 

ASME QW 196.2.1,

AWS B4.0 clause 5.0,

ISO 15630-2,
Fracture test Macroscopic examination; Visual examination

ANSI/AWS D1.1 Section 4,

AS/NZS 2205.4.1, 

AWS B4.0 clauses 9.2.1, 9.2.4, 9.2.6;

ISO 9017; 

For the purpose of determining compliance with:

ASME IX QW182

DNV Rules for classification of ships/high speed, light craft and naval surface craft - Part 2 Chapter 1 Section 3, Part 2 Chapter 3 Section 5, Part 2 Chapter 4 Section 8

Lloyds - Rules for the manufacture, testing and certification of materials Chapter 12; 
Macroscopic examination Macroscopic examination

AS/NZS 2205.5.1,

ASME IX Article I QW183,QW184; QW196.1,  

ISO 17639,

For the purpose of determining compliance with:
ANSI/AWS D 1.1 Section 4,
ASME IX Article I QW183,QW184; QW196.1,  

DNV Rules for classification of ships/high speed, light craft and naval surface craft -  Part 2 Chapter 1 Section 3, Part 2 Chapter 3 Section 5, Part 2 Chapter 4 Section 8

Lloyds - Rules for the manufacture, testing and certification of materials Chapter 12
Tensile properties All-weld-metal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse butt tensile; Transverse joggle-butt tensile; Transverse tensile

ANSI/AWS D1.1 Section 4,

AS 1391, 

AS 2205.2.1, AS 2205.2.2, 

ASME IX Article IV QW-462, ASME IX Article IX QB-451,
AWS B4.0 clauses 4.1,4.2, 4.3, 4.4, 4.7,
ISO 4136,
For the purpose of determining compliance with:
ANSI/AWS D1.1 Section 4,

ASME IX Article IV QW-462, ASME IX Article IX QB-451,  

DNV Rules for classification of ships/high speed, light craft and naval surface craft - Part 2 Chapter 1 Section 3, Part 2 Chapter 3 Section 5, Part 2 Chapter 4 Section 8

Lloyds - Rules for the manufacture, testing and certification of materials Chapter 12; 

0.2 kN to 1000 kN 
Impact resistance Charpy - Assessment of fracture appearance; Charpy V-notch - Impact value

AS 1544.2, AS 2205.7.1,

ASTM A370, ASTM A1058, ASTM E23, 

AWS B4.0 clause 7.1,

ISO 9016,

For the purpose of determining compliance with:
AS 1544.2,
DNV Rules for classification of ships/high speed, light craft and naval surface craft - Part 2 Chapter 1 Section 3,Part 2 Chapter 3 Section 5, Part 2 Chapter 4 Section 8,
Lloyds - Rules for the manufacture, testing and certification of materials Chapter 12,

from 40°C to -101°C and -196°C
Hardness Vickers

AS 1817.1; AS 2205.6.1; 

ISO 9015-1; 

for determining compliance with:

AWS B4.0 clauses 8.1,8.2

DNV Rules for classification of ships/high speed, light craft and naval surface craft -  Part 2 Chapter 1 Section 3, Part 2 Chapter 3 Section 5, Part 2 Chapter 4 Section 8,

Lloyds - Rules for the manufacture, testing and certification of materials Chapter 12

9.8 N to 490 N

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.