Calibrations and Laboratory Systems

Site

Calibrations and Laboratory Systems

Calibration and Laboratory Systems

Accreditation No.

20423

Site No.

23527

Date of Accreditation

Address

1 / 26 Neon Street
Sumner, QLD 4074
Australia

callabs.com.au

Contact

Mr Peter Spence P: +61 (07) 32795879

Availability

Services available to external clients

Scope of Accreditation

Withdrawn

ISO/IEC 17025 (2017)

Calibration

  • The uncertainty of measurement is reported as an expanded uncertainty having a level of confidence of 95% unless stated otherwise
Withdrawn
Service Product Determinant Technique Procedure Limitations
Dimensional metrology - Engineering equipment and precision instruments Dial gauges Length measurements Direct measurement against a reference standard

Capability

with Calibration and Measurement Capability of -
3.4 μm up to 50 mm
Test sieves Length measurements Direct measurement against a reference standard

Capability

with Calibration and Measurement Capability of -

3 μm with aperture range of 0.038 mm to 3.35 mm (woven wire test sieves )

Vernier calipers Length measurements Direct measurement against a reference standard

Capability

14 μm up to 100 mm 

21 μm above 100 mm up to 300 mm
Force metrology - Force measuring and testing equipment Compression and universal machines in compression; Elastic force measuring devices; Load cells; Load measuring rings Force in compression Comparison measurement with reference load cell AS 2193

Capability

Calibration of devices such as load measuring rings for soilstesting machines including on-site calibrations to the following classes of AS2193.
Calibration of load cells including on-site calibrations to Section 3 of AS 2193.
Calibration of testing machines including on-site calibrations to Section 3 of AS 2193.
Class A from 0.551 kN to 2000 kN
Class B from 0.551 kN to 2000 kN
Class C from 0.275 kN to 2000 kN,

0.74% from 0.275 kN up to 0.500 kN

0.41% from 0.500 kN up to 1.0 kN

0.36% from 1 kN up to 400 kN

0.31% from 400 kN up to 2000 kN



Mass - Determination of mass and calibration of weighing devices Industrial weighing devices Mass Gravimetric measurement against reference mass

Capability

with Calibration and Measurement Capability of -

including on-site calibrations

1 mg from 30 g to 320 g

15 mg above 320 g to 3 kg 

120 mg above 3 kg to 8 kg 

180 mg above 8 kg to 21 kg

1.2 g above 21 kg to 30 kg

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.