Bureau Veritas Asset Integrity and Reliability Services Pty Limited

Site

Canning Vale MTU

Accreditation No.

1267

Site No.

13379

Date of Accreditation

18 Dec 1997

Address

6 Gauge Circuit
Canning Vale, WA 6155
Australia

bureauveritas.com.au

Contact

Mr Anthony Thomas P: +61 0425253719

Availability

Services available to external clients

Scope of Accreditation

Canning Vale MTU

ISO/IEC 17025 (2017)

Manufactured Goods

Service Product Determinant Technique Procedure Limitations
Material performance evaluation of metal products Fixtures and components Tensile properties Tensile tests with control of strain rate, including yield stress and proof stress

AS 1391, ISO 6892-1, ASTM A370

5 to 2000 kN

Prepared metallic test specimens; Welded test specimens Bending properties Transverse guided bend AS 2205.3.1, ASTM E190, ASME IX QW-160, AWS D1.1 Clause 4.9.3.1, BS EN ISO 9606-1, BS EN ISO 9606-2, BS EN ISO 15614-2, ISO 15614-1, ISO 5173
Hardness Brinell

AS 1816.1, ASTM E10

4.9 kN to 29.4 kN

Charpy impact toughness; Impact resistance Charpy - Assessment of fracture appearance; Charpy V-notch - Impact value

AS 1544.2, AS 2205.7.1, ASTM A370, ASTM E 23, ISO 148-1 and ISO 15614-1

40 °C to -120 °C and at -196 °C

Hardness Vickers

AS 1817.1, AS 2205.6.1, ASTM E384, BS EN ISO 15614-1, ISO 9015-1

0.98 N to 9.8 N and 49 N to 980 N

Hardness Rockwell - Scale B; Rockwell - Scale C

AS 1815.1, ASTM E18

Tensile properties All-weld-metal tensile; Axial tensile; Longitudinal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse butt tensile; Transverse joggle-butt tensile; Transverse tensile

 AS 1391, ISO 6892-1, ASTM A370,

AS 2205.2.1, AS 2205.2.2, BS EN ISO 15614-1, BS EN ISO 15614-2, ASME IX QW-150, AWS D1.1 Clauses 4.9.3.4 and 4.9.3.6


5 to 2000 kN

Fracture test Visual examination

AS 2205.4.1, ASME IX QW-180 and QW-182, AWS D1.1, BS EN ISO 9606-1, BS EN ISO 9606-2

Threaded fasteners, bolts and nuts Proof load; Tension Not applicable

SAE J 429, AS 4291.1, AS/NZS 4291.2, AS/NZS 1252.1 clause 2.4, AS/NZS 1252.1 clause 3.4, AS/NZS 1252.1 clause 4.4, ISO 3506-2, ASTM A370, ASTM A193, ASTM A194, ASTM F606, ASTM E8, ASTM A320, ASTM A962, AS 2528 and to ensure compliance with AS 1110 and AS 1112, ISO 898-1, ISO 898-2

Tubing/piping Flattening properties Flattening AS/NZS 1163, ASTM A530
Welded test specimens Macroscopic examination Visual examination AS/NZS 2205.5.1, ASME IX QW-183 and QW-184, AWS D1.1 and ISO 17639

ISO/IEC 17025 (2017)

Materials

Service Product Determinant Technique Procedure Limitations
Metallographic evaluation of metals and alloys Ferrous materials Ferrite count Point count

ASTM E562, ASTM E1245, in-house method P-3000-MI-0016

Ferrous materialssteel bars, blooms & forgings Macroscopic examination Macroscopic examination

ASTM E381, ASTM E340 and in-house method P-3014-ME-004

Metallographic evaluation of metals and alloysincluding on-site testing. Ferrous materials Replication metallography Microscopic examination ASTM E1351 and in-house method P-3000-MI-0006

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.