Southern Quarries Pty Ltd - Direct Mix Concrete Sales

Site

Direct Mix Concrete Laboratory

Accreditation No.

2292

Site No.

2285

Date of Accreditation

Address

28 Musgrave Avenue
Welland, SA 5007
Australia

directmix.com.au

Contact

Mr Felician Buia P: +61 (08) 83468682

Availability

Services available to external clients

Scope of Accreditation

Withdrawn

ISO/IEC 17025 (2005)

Infrastructure and Asset Integrity

Withdrawn
Service Product Determinant Technique Procedure Limitations
Evaluation of geotechnical and civil construction material - Aggregate contaminants Aggregates Clay and fine silt; Organic impurities Colour test; Settling

AS 1141.33, AS 1141.34

Evaluation of geotechnical and civil construction material - Aggregate properties Aggregates Bulk density Compacted; Uncompacted

AS 1141.4

Shape Elongation; Flakiness; Proportional calliper

AS 1141.14, AS 1141.15; DPTI (SA) Method  TP240, DPTI (SA) Method TP241

Particle density of coarse aggregate; Particle density of fine aggregate Weighing-in-water

AS 1141.5, AS 1141.6.1

Particle size distribution Sieve analysis; Sieve analysis of material finer than 75 µm

AS 1141.11.1, AS 1141.12

Evaluation of geotechnical and civil construction material - Concrete, grout and mortar consistence in-situ Concrete, grout and mortar Slump flow Cone

AS 1012.3.1

ASTM C1611

Evaluation of geotechnical and civil construction material - Concrete, grout and mortar properties Concrete, grout and mortar Mass per unit volume - Fresh concrete In-situ measurement using fixed volume measure

AS 1012.5

Bleeding In-situ analysis - Freshly mixed concrete

AS 1012.6

Compressive strength Core; Cylinder

AS 1012.9, AS 1012.14

Uniformity of mixing Not applicable

AS 1379 Appendix A

Air content of freshly mixed concrete Reduced air pressure

AS 1012.4.2

Mass per unit volume - Hardened concrete Dimensions

AS 1012.12.1

Flexural strength Modulus of rupture

AS 1012.11

Evaluation of geotechnical and civil construction material - Concrete, grout and mortar specimen manufacture and curing Concrete, grout and mortar Specimen conditioning; Specimen manufacture; Specimen manufacture and curing In-situ manufacture and curing of cylindrical specimens; In-situ manufacture and curing of drying shrinkage specimens; In-situ manufacture and curing of flexural strength specimens; Manufacture and curing of cylindrical specimens in the laboratory; Manufacture and curing of drying shrinkage specimens in the laboratory; Manufacture and curing of fibre reinforced specimens in the field; Wet conditioning of hardened concrete core specimens

AS 1012.8.1, AS 1012.8.2, AS 1012.8.4, AS 1012.14

Evaluation of geotechnical and civil construction material - Soil classification Soils Linear shrinkage; Liquid limit; Moisture content; Plastic limit; Plasticity index; Sieve analysis Casagrande one point; Drying oven

AS 1289.2.1.1, AS 1289.3.1.2, AS 1289.3.2.1, AS 1289.3.3.1, AS 1289.3.4.1, AS 1289.3.6.1, DPTI (SA) Method TP134

Evaluation of geotechnical and civil construction material - Soil pre-treatment Soils Soil pre-treatment Not applicable

AS 1289.1.1

Sample collection Aggregates; Concrete, grout and mortar Not applicable Aggregate from a stockpile; Fresh concrete from a mixer; Hardened concrete by coring

AS 1012.1, AS 1012.14, AS 1141.3.1

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.