Cameron Services International Pty Ltd

Site

Gladstone Laboratory

Accreditation No.

14340

Site No.

23039

Date of Accreditation

Address

86A Callemondah Drive
Gladstone, QLD 4680
Australia

cameron.slb.com

Contact

Mr J Barkhuizen P: +61 (07) 49782622

Availability

Services available to external clients

Scope of Accreditation

Print scopes

Withdrawn

ISO/IEC 17025 (2005)

Infrastructure and Asset Integrity

Withdrawn
Service Product Determinant Technique Procedure Limitations
Evaluation of mechanical performance of pressure plant, pipelines and equipment Hose and hose assembliesElastomeric hoses Hydrostatic pressureIncluding on-site testing Not applicable Up to 207 MPa
Piping Hydrostatic pressureIncluding on-site testing Not applicable ASME B31.1 Chapter 6 Section 137.4, ASME 31.3 Chapter 6 Sections 345, AS 4041 clauses 6.6, 6.7 and 6.9 Up to 207 MPa
Pneumatic pressureIncluding on-site testing Not applicable ASME B31.1 Chapter 6 Section 137.5 and 137.6, ASME 31.3 Chapter 6 Sections 345, AS 4041 clauses 6.6,6.8.1, and 6.9 Up to 207 MPa
Pressure vessels Pneumatic pressureIncluding on-site testing Not applicable AS 1210 Section 5.11, AS 4037 Clause 18 Up to 207 MPa
Hydrostatic pressureIncluding on-site testing Not applicable AS 1210 Section 5.10, AS 4037 Clause 17, ASME VIII Division 1 Clause UG-99, ASME Section 1 BPVC,Clause PG-99  Up to 207 MPa
ValvesPipeline and Piping Valves; Pressure Relief Valves; Control Valves; Resilient-seated, nonmetallic-seated, and metal-to-metal-seated valves of the gate, globe, plug, ball, check and butterfly types Pneumatic pressureIncluding on-site testing Not applicable

ANSI FCI 70-2 Section 4 and 5,
API 6A Clause 7.4.9 and 10.16.6, API 6D Annex H, API 6DSS Clauses 11 and Annex B, API 526 Section 9, API 527 Section 2 and 5, API 576 clause 6.2 and Appendix A, API 598 Section 5 and 6,

API 2000 Clause 5.4,

ASME Section 1 BPVC Clause PG 73.5,
BS EN 12266 Part 1,
ISA 75:19.01,
AS 1271 clauses 3.4, ISO 4126.4 Clause 6.4 and 6.6, ISO 5208 Section 4,

ISO 28300 Clause 6.4,
MSS SP-61 Section 3, 4 and 5

Up to 207 MPa
Hydrostatic pressureIncluding on-site testing Not applicable ANSI FCI 70-2 Section4 and 5,
API 6A Clause 7.4.9 and 10.16.6, API 6D Section 9 and Annex H, API 6DSS Clauses11 and Annex B, API 526 Section 9, API 527 Section 4, API 576 clause 6.2 andAppendix A, API 598 Section 5 and 6,
ASME B16.34 Section 7, ASME Section 1 BPVC Clause PG 73.5,
BS EN 12266 Part 1,
ISA 75:19.01,
AS 1271 clauses 2.6 and 3.4, ISO 4126.4 Clause 6.3, ISO 5208 Section 4,
MSS SP-61 Section 3, 4 and 5 		Up to 207 MPa

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.