
National Association of Testing Authorities, Australia
Scope of Accreditation
CSIRO
Site
Hydraulics and Facades Laboratory
Accreditation No.
165
Site No.
4580
Date of Accreditation
Contact
Availability
Services available to external clients
Scope of Accreditation
Withdrawn
ISO/IEC 17025 (2005)
Manufactured Goods
|
|||||
Service | Product | Determinant | Technique | Procedure | Limitations |
---|---|---|---|---|---|
Mechanical performance evaluation of components for building envelopes, framing and interior liningIn North Ryde and at clients facilities | Door, window and skylight assemblies | Air infiltration; Deflection; Operating force; Strength; Water penetration resistance | To be determined |
AS/NZS 4420.1 BS 5368.1 (1976), BS 5368.2 (1980), BS 5368.3 (1978), BS 5368.4 (1976) BE EN 12211 for the purposes of determining compliance with AS 2047, BCA Vol 1: FV 1, BCA Vol 2: V 2.2.1 |
|
Facade assemblies including interior and exterior cladding systems | Air infiltration; Deflection; Proof load; Seismic evaluation; Strength at ultimate limit state loading; Structural performance evaluation; Water penetration resistance | Not applicable |
AS/NZS 4284; AAMA 501.1, AAMA 501.2; ASTM E283, ASTM E330, ASTM E331, ASTM E547, BS EN 12152, BS EN 12153, BS EN 12154, BS EN 12155, BS EN 13051, PNAP 106 (Hong Kong), and SIROWET |
||
Products and appliances connected to the water supply - Physical evaluation | Baths, sinks and basins; Showers and shower modules | Chemical and stain resistance; Colour fastness to artificial light; Degradation by ultraviolet light; Dimensions; Endurance; Flow rate; Impact resistance; Leak tightness; Rigidity; Spread angle; Strength of assembly; Surface finish; Thermal distortion; Thermal expansion; Thermal shock resistance | To be determined |
AS 1756 Sections 3.2.2, 3.3, 3.4, 6.3, Appendix A AS/NZS 2023 Sections 2.2.2, 2.3, 3.3, 3.4, 4.2, 5.2.2, 6.3, Appendix A AS/NZS 3662 Sections 5.1.2, 5.1.3, 5.2, 5.3, 5.4, 5.5, 5.6, Appendices B,C,D,E,F,G AS 4775 Sections 6.2, 6.5, 7.1, 7.3, 8.1, 8.3 AS/NZS 6400 Section 3 ANSI Z358.1 clauses 5, 6, 7 and 8 |
|
Beverage dispensers and icemakers | Back flow; Leak tightness; Leakage | To be determined |
ATS 5200.105 Clauses 8.1, 8.2, 8.3, 9.2, 9.3; WMTS-105 Clauses 8.1, 8.2, 8.3, 9.2, 9.3 |
||
Food waste disposal units | Air gap; Back flow; Degree of fineness (FWDU); Drainage | To be determined |
ATS 5200.028 clauses 9.1, 9.2, 9.3. 9.4; WMTS-028 clauses 9.1, 9.2, 9.3. 9.4 |
||
Sanitary fixtures - Urinals, water closet pan/suites, bidets, douche seats, cisterns and purpose built bathroom modules | Back siphonage; Capacity; Contaminants; Dezincification; Dimensions; Discharge; Distortion; Endurance; Flow rate; Leak tightness; Leakage; Pressure; Refill time; Splash; Strength of assembly; Wetting | To be determined |
AS 1172.1 Sections 2.1, 2.2.3, 3, Appendices A, B, C, D, E, F, G, H AS 1172.2 Sections 2.3.2, 2.4, 2.5, 4.4, 4.5, 6.3, 6.4, Appendices A, B, C, D, E, F, G, H, I, K, L, M AS 3494 Sections 1.4.1, 1.4.7, Appendix A AS/NZS 3982 Sections 1.5.1(c), 1.5.1(d), 1.5.2, 1.5.3(excluding (b)), 1.5.4 (excluding (b)), 1.5.5, 1.6.1, 1.6.2, 1.6.3, 1.6.4, Appendices A, B, C, D ATS 5200.051 Section 9.2, Appendix B; WMTS-051 Section 9.2, Appendix B ATS 5200.459 Section 9.2; WMTS-459 Section 9.2 AS/NZS 6400 Sections 6,7 |
||
Tap assemblies; Valves | Air separation distance; Back flow; Back siphonage; Dimensions; Discharge volume; Endurance; Flow rate; Flush performance; Leak tightness; Leakage; Overflow; Pressure; Refill time; Seal integrity; Strength of assembly; Switching time; Torque; Water rise | To be determined |
AS 1172.2 Sections 5.4.2, 5.4.3, 6.4 AS 1357.1 Sections 3.2.1, 3.2.2, 6.4.1, 6.4.2, 8.7.7, 8.7.8, 8.7.9, Appendices E, F, P, Q, R AS 1357.2 Sections 3.2.1, 3.2.2, 7.2, 7.4, 7.5, 9.4, Appendices L, M, N, V, W AS 1628 Sections 4.2, 4.3, 4.4, 4.5, 5.3, 6.3.2, Appendices B, C, D AS 1910 Sections 4.2, 4.3, 4.4, Appendices C, D, E AS/NZS 2638.1 Sections 3.2, 3.3, 3.4.2, 3.5.1, 3.6.1, 3.7, 5 AS/NZS 2638.2 Sections 3.2, 3.3, 3.4.3, 3.5.1, 3.6, 3.7, 5 AS/NZS 2845.1 Sections 4.4.1, 4.5, 5.4.2, 5.5, 6.4.1, 6.5, 7.4, 8.4.2, 8.5, 9.4.1, 9.5, 10.5, 14.5, 15.5, 16.4, 16.5, Appendices C,H,I,J,K,L,M,O,P,Q,R,S,T,U,V,W,X,Y,AA,BB,CC,DD,EE,FF,PP,QQ,RR,SS AS 2887 Clause 2.6 AS 2888.11 AS 3498 Section 7.2, Appendices A,B AS/NZS 3718 Sections 3.6.1, 3.7, 3.8, 3.9, 3.10, 3.12, 3.13, 3.14, 3.15, Appendices C,D,E,F,G,H,I,J,K,L,M,N,Q,R AS 4794 Sections 5.1.2, 5.1.3, 5.1.4, 5.2.2, 5.2.3, 5.2.4, Appendices D,E AS 4796 Sections 3.2.1, 3.6, 4, Appendices E,F,G,H,I ATS 5200.004 Sections 9.2, 9.3, 9.4, Appendices B,C ATS 5200.006 Sections 8.3, 9.1, 9.2, 9.3, 9.4, Appendix A, Tables A1 and A2; WMTS-006 Sections 8.3, 9.1, 9.2, 9.3, 9.4, Appendix A, Tables A1 and A2 ATS 5200.012 Sections 9.2, 9.4.1, Appendix B; WMTS-012 Sections 9.2, 9.4.1, Appendix B ATS 5200.016 (2010) Sections 8.1, 8.2, 9.2, 9.3 ATS 5200.020 Sections 8.2, 9.2, 9.3, 9.4 ATS 5200.021 Sections 8.2, 9.2, 9.3 ATS 5200.030 Sections 9.3, 9.4, 9.5, 9.6 Appendices C,D,E; WMTS-030 Sections 9.3, 9.4, 9.5, 9.6 Appendices C,D,E ATS 5200.033 Section 9, Appendix B; WMTS-033 Section 9, Appendix B ATS 5200.037.2 Sections 9.2, 9.3, 9.4.2, 9.4.3, Appendices B,C ATS 5200.453 Sections 9.2, 9.3, 9.4; WMTS-453 Sections 9.2, 9.3, 9.4 ATS 5200.467 Sections 8.1, 8.3, 9.3.2, 9.4; WMTS-467 Sections 8.1, 8.3, 9.3.2, 9.4 ATS 5200.475 Sections 8.1, 8.2, 9.2, 9.3, Appendices B,C; WMTS-475 Sections 8.1, 8.2, 9.2, 9.3, Appendices B,C ATS 5200.477 Sections 8.3, 8.4, 8.5, 9.2, 9.3, 9.4, 9.5, Appendices B,C,D; WMTS-477 Sections 8.3, 8.4, 8.5, 9.2, 9.3, 9.4, 9.5, Appendices B,C,D ATS 5200.486 Appendices B, CATS 5200.489 Clauses 9.3, 9.4; WMTS-489 Clauses 9.3, 9.4 AS 5830.1 Sections 4.1.2, 4.1.3, 4.1.4, 4.1.5, Appendices C,D,E,F,G,H AS 5830.2 Sections 4.1.2, 4.1.3, 4.1.4, Appendices C,D,E,F,G,H AS/NZS 6400 Sections 4,5,6 ISO 5208 Sections 4.10, 4.11, 4.12 |
||
Water service products - Connectors, filters, fittings, hoses and pipes | Bending properties; Heat ageing; Hydrostatic pressure; Leak tightness; Pressure; Pressure cycling resistance; Pulsation; Strength of assembly; Thermal cycling | To be determined |
AS 3499 Sections 8.2, 8.3, 8.4, 8.6, 8.7, 8.8, 8.9, Appendices C,D AS 3688 Sections 3.2, 3.3, 3.4, 3.6, 3.7, 3.8, 3.10, 4.2, 4.3, 4.4, 4.5, 4.6, 4.7, 4.8, 4.9, 4.10, Appendices D,E,F,G,H,I,J,K,L AS/NZS 3707 Sections 6, 7, 8 ISO 1167.1 Sections 9, 10 ISO 5208 Sections 4.10, 4.11, 4.12 ISO 9393-1 Sections 7.2, 7.3, 7.4 |
||
Dimensions; Electrical resistance; Flattening properties; Impact resistance; Leak tightness; Pressure; Pressure cycling resistance; Pull-out resistance; Residual stress; Reversion; Seal integrity; Strength of assembly; Stress relief; Temperature evaluation; Thermal cycling; Torque; Vacuum pressure | Not applicable |
AS/NZS 1260 Sections 3.3.2, 3.3.3, 3.4.3, 3.4.4, 4.2, 4.3, 4.4, 4.5, 5.2, 5.3, 5.4, 5.5, 5.6, 5.7, 5.10, 6.3, 7.3 AS 1432 Sections 4.3, 5.4.2 AS/NZS 1462.1 Sections 6, 8, 10, 11 AS/NZS 1462.2 Sections 6, 7 AS/NZS 1462.6 Sections 8, 9 AS/NZS 1462.8 Sections 6, 7 AS/NZS 1462.10 Sections 2, 3 AS/NZS 1462.11 Section 6 AS/NZS 1462.13 Sections 5, 6, 7 AS/NZS 1462.16 Section 6 AS/NZS 1477 Sections 3.3.6, 3.4.2, 3.4.3, 3.4.4, 3.5.1, 3.5.2, 4.2, 4.3, 4.4, 4.5, 5.2, 5.3, 5.3, 7.3, 7.4 AS 1589 Sections 1.7, 1.8, 1.9, 1.10, 1.13, 2.3, 2.4, 2.6, 3.3.5, 3.4, 3.5, 3.6, 4.2, 4.3, 4.4, 4.5, 4.6, 4.7, 4.8, 4.9, Appendices B,C,D,E,F,G,H AS 2887 Sections 1.6.2, 1.6.4, 1.6.5, 1.6.6, 1.6.7, 1.7, 1.8, 1.10.2, 2.2, 2.3, 2.4, 3.2, 3.3.3.5, 3.3.3.6, 3.3.4, 3.3.5, 3.4, 3.5, 4.2, 4.3, 4.4, 4.5, 4.6, 4.7, 4.8, 4.9, 4.10 AS 2888.1, .2, .3, .4, .5, .6, .7, .8, .9, .10 AS 3518 Sections 2.7, 2.8, 2.9 AS 3688 Sections 3.2, 3.3, 3.4, 3.6, 3.7, 3.8, 3.9, 3.10, 4.2, 4.3, 4.4, 4.5, 4.6, 4.7, 4.8, 4.9, 4.10,4.11, 5.2, 5.3, 6.2, 6.3, 7.2, 7.3, 7.4, 8.2, 9.3, Appendices D,E,F,G,H,I,J,K,L,M AS/NZS 4129 Sections 1.8, 1.10, 1.13.1, 1.13.2, 1.14.2, 2.4.2, 2.4.3, 2.4.4, 2.4.5, 3.5.1, 4.4.2, 4.4.3, 4.4.4, 4.4.5, 4.4.6.2, 4.4.6.3, 5.3, 6.8 AS 4181 Sections 4.1.1, 4.1.3, 4.1.4, 4.1.5, 4.1.6, 4.1.7, 4.2 AS/NZS 4327 Sections 3.1, 4.1, 4.2, 4.3, Appendices C,D,E,F AS/NZS 4765 Sections 3.2.3, 3.2.7, 3.2.8, 3.2.11, 3.3.1, 3.3.2 AS/NZS 4793 Sections 4.1.2, 4.1.3, 4.1.4, 4.1.5, 4.1.6, 4.2 AS/NZS 4998 Sections 4.1.2, 4.1.3, 4.1.4 AS/NZS 5065 Sections 3.3.1, 3.3.2, 3.4.1, 3.4.2, 3.4.3 ATS 5200.037.1 Sections 9.2, 9.3, 9.4; WMTS-037.1 Sections 9.2, 9.3, 9.4 ATS 5200.040 Sections 8.5, 9.1, 9.2, 9.3, 9.4; WMTS-040 Sections 8.5, 9.1, 9.2, 9.3, 9.4 ATS 5200.489 Section 9.2, Appendix B; WMTS-489 Section 9.2, Appendix B ATS 5200.491 Sections 8.2.1, 8.2.2, 8.2.3, 8.2.4, 8.2.5, 8.3.1, 8.3.2, 8.3.3, 8.3.4, 8.3.5, 9.2.1, 9.2.2, 9.3.1, 9.3.2, 9.3.3, 9.4.1, 9.4.2, 9.4.3, 9.4.4, 9.4.5, 9.4.6, 9.5.1, 9.5.2, 9.5.3 Appendices B,C; WMTS-491 Sections 8.2.1, 8.2.2, 8.2.3, 8.2.4, 8.2.5, 8.3.1, 8.3.2, 8.3.3, 8.3.4, 8.3.5, 9.2.1, 9.2.2, 9.3.1, 9.3.2, 9.3.3, 9.4.1, 9.4.2, 9.4.3, 9.4.4, 9.4.5, 9.4.6, 9.5.1, 9.5.2, 9.5.3 Appendices B,C ISO 1167.1 ISO 3501 ISO 3503 |
|||
Water treatment appliances and systems | Back flow; Seal integrity; Strength of assembly | To be determined |
ATS 5200.101 Clauses 8.1, 8.2, 9.2, 9.3; WMTS-101 Clauses 8.1, 8.2, 9.2, 9.3 ATS 5200.103 Clauses 8.1, 8.2, 9.2, 9.3; WMTS-103 Clauses 8.1, 8.2, 9.2, 9.3 ATS 5200.104 Clauses 8.1, 8.2, 8.3, 9.2, 9.3; WMTS Clauses 8.1, 8.2, 8.3, 9.2, 9.3 IEC 61770 Sections 6, 7, 8 and Annex A |
||
Water treatment appliances and systemsDrinking water treatment units | Burst pressure; Endurance; Hydrostatic pressure | To be determined |
AS/NZS 3497 Sections 5.2, 5.3, 5.4, 5.6 ATS 5200.103 Clauses 8.1, 9.2, 9.3; WMTS-103 Clauses 8.1, 9.2, 9.3 |
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.
Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.
Accreditation No.
165
Site No.
4580
Print date
23 May 2022