ENERGY QUEENSLAND LIMITED

Site

Instrument Calibration Laboratory

Accreditation No.

74

Site No.

20791

Date of Accreditation

Address

524 Bilsen Road
Geebung, QLD 4034
Australia

yurika.com.au/capabilities/calibration-testing

Contact

Mr Darryl Darben P: +61 (07) 36649180

Availability

Services available to external clients

Scope of Accreditation

Print scopes

Withdrawn

Instrument Calibration Laboratory

ISO/IEC 17025 (2005)

Calibration

  • The uncertainty of measurement is reported as an expanded uncertainty having a level of confidence of 95% unless stated otherwise
Withdrawn
Service Product Determinant Technique Procedure Limitations
DC and low frequency electrical metrology - Electrical measurement and test equipmentIncluding on site calibrations in-situ Ammeters; Digital multimeters (DMM) AC current; DC current Comparison with a reference standard

D.C. ammeters

At 0 mA and from 1 mA to 10 A

A.C. ammeters

At 0 mA and from 5 mA to 10 A at 45 Hz to 1 kHz

Capability

Including on site calibrations

with Calibration and Measurement Capability of -

D.C. ammeters

0.025% + 0.05 μA + 1 digit for current range of 0 mA and 1 mA to <3.3 mA
0.025% + 0.25 μA + 1 digit for current range of 3.3 mA to <33 mA
0.05% + 1 digit for current range of 33 mA to <2.2 A
0.08% + 1 digit for current range of 2.2 A to 10 A

A.C. ammeters

0.2% + 1 digit for current range of 0 mA and 5 mA to <2.2 A at 45 Hz to 1 kHz
0.2% + 1 digit for current range of 2.2 A to 10 A at 45 Hz to 500 Hz
0.7% + 1 digit for current range of 2.2 A to 10 A at 500 Hz to 1 kHz
Digital multimeters (DMM); Ohm meters DC voltage; Resistance Comparison with a reference standard; Direct measurement against a reference standard

At 0 Ω and from 1 Ω to 100 MΩ 

Insulation testers up to 1 GΩ and output voltages up to 10 kV

Capability

Including on site calibrations

with Calibration and Measurement Capability of -

0.02% + 0.015 Ω + 1 digit for resistance range of 0 Ω and 1 Ω to <330 Ω
0.04% + 1 digit for resistance range of 330 Ω to <3.3 MΩ
0.12% + 1 digit for resistance range of 3.3 MΩ to 10M Ω
0.7% + 1 digit for resistance range of >10 MΩ to <33 MΩ
1.0% + 1 digit for resistance range of 33 MΩ to 100 MΩ

Insulation testers 
0.2% + 1 digit for resistance up to 10 MΩ
2.0% + 1 digit for resistance from >10 MΩ to 1 GΩ
1.0% for voltage measurement up to 1 kV
2.5% for high voltage measurement from >1 kV to 10 kV
Digital multimeters (DMM); Voltmeters AC voltage; DC voltage Comparison with a reference standard

D.C. voltage

At  0 mV and from 1 mV to 1000 V

A.C. voltage

At 0 mV and from 1 mV to 1000 V at 45 Hz to 1 kHz

Capability

Including on site calibrations

with Calibration and Measurement Capability of -

D.C. voltmeters

0.01% + 3 μV + 1 digit for voltage range of 0 mV and 1 mV to <330 mV
0.01% + 1 digit for voltage range of 330 mV to 1000 V

A.C. voltmeters

0.4% + 20 μV + 1 digit for voltage range of 0 mV and 1 mV to <100 mV at 45 Hz
to 1 kHz
0.1% + 20 μV + 1 digit for voltage range of 100 mV to 1000 V at 45 Hz to 1 kHz
In-situ calibration of electrical measurement and test equipment Ammeters AC current; DC current Comparison method

D.C. ammeters

At 0 mA and from 1 mA to 10 A

A.C. ammeters

At 0 mA and from 5 mA to 10 A at 45 Hz to 1 kHz

Capability

with Calibration and Measurement Capability of -

D.C. ammeters

0.025% + 0.05 μA + 1 digit for current range of 0 mA and 1 mA to <3.3 mA
0.025% + 0.25 μA + 1 digit for current range of 3.3 mA to <33 mA
0.05% + 1 digit for current range of 33 mA to <2.2 A
0.08% + 1 digit for current range of 2.2 A to 10 A

A.C. ammeters

0.2% + 1 digit for current range of 0 mA and 5 mA to <2.2 A at 45 Hz to 1 kHz
0.2% + 1 digit for current range of 2.2 A to 10 A at 45 Hz to 500 Hz
0.7% + 1 digit for current range of 2.2 A to 10 A at 500 Hz to 1 kHz
Ohm meters DC voltage; Resistance Comparison method; Direct measurement against a reference standard

At 0 Ω and from 1 Ω to 100 MΩ 

Insulation testers up to 1 GΩ and output voltages up to 10 kV

Capability

with Calibration and Measurement Capability of -

0.02% + 0.015 Ω + 1 digit for resistance range of 0 Ω and 1 Ω to <330 Ω
0.04% + 1 digit for resistance range of 330 Ω to <3.3 MΩ
0.12% + 1 digit for resistance range of 3.3 MΩ to 10M Ω
0.7% + 1 digit for resistance range of >10 MΩ to <33 MΩ
1.0% + 1 digit for resistance range of 33 MΩ to 100 MΩ


Insulation testers
0.2% + 1 digit for resistance up to 10 MΩ
2.0% + 1 digit for resistance from >10 MΩ to 1 GΩ
1.0% for voltage measurement up to 1 kV
2.5% for high voltage measurement from >1 kV to 10 kV
Voltmeters AC voltage; DC voltage Comparison method

D.C. voltage

At  0 mV and from 1 mV to 1000 V

A.C. voltage

At 0 mV and from 1 mV to 1000 V at 45 Hz to 1 kHz

Capability

with Calibration and Measurement Capability of -

D.C. voltmeters

0.01% + 3 μV + 1 digit for voltage range of 0 mV and 1 mV to <330 mV
0.01% + 1 digit for voltage range of 330 mV to 1000 V

A.C. voltmeters

0.4% + 20 μV + 1 digit for voltage range of 0 mV and 1 mV to <100 mV at 45 Hz
to 1 kHz
0.1% + 20 μV + 1 digit for voltage range of 100 mV to 1000 V at 45 Hz to 1 kHz
In-situ calibration of frequency, time and waveform measuring equipment Frequency meters Frequency To be determined

From 10 Hz to 100 kHz

Capability

with Calibration and Measurement Capability of -

0.02% + 1 mHz + 1 digit for frequency range of 10 Hz to <10 kHz
0.02% + 15 mHz + 1 digit for frequency range of 10 kHz to 100 kHz
Time and frequency metrology - Frequency, time and waveform measuring equipmentIncluding on site calibrations in-situ Frequency meters Frequency Measurement against reference standard

From 10 Hz to 100 kHz

Capability

Including on site calibrations

with Calibration and Measurement Capability of -

0.02% + 1 mHz + 1 digit for frequency range of 10 Hz to <10 kHz
0.02% + 15 mHz + 1 digit for frequency range of 10 kHz to 100 kHz

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.