Photometry & Electrical Testing Pty. Ltd.

Site

LEDLab, Hornsby, NSW

Accreditation No.

19541

Site No.

22537

Date of Accreditation

18 May 2012

Address

4/140 George Street
Hornsby, NSW 2077
Australia

ledlab.com.au

Contact

Mr David Ford P: +61 (02) 94763097

Availability

Services available to external clients

Scope of Accreditation

Print scopes
LEDLab, Hornsby, NSW

ISO/IEC 17025 (2017)

Manufactured Goods

Service Product Determinant Technique Procedure Limitations
Electrical equipment approval and safety evaluation Enclosures for electrical equipment Degree of protection - IK rating; Degree of protection - IP rating Not applicable AS 60529 (excluding IPX9);
AS/NZS 60598.1, IEC 60598-1 and EN 60598-1;
IEC 62262
Lamps and lampholders (including LED-based lamps); Luminaires Electrical safety Ball pressure; Dimensional assessment including creepage and clearance; Electrical characteristics; Endurance and resistance to external conditions; Energy measurement; Fire hazard assessment; Firmware assessment; Function assessment including abnormal operation; Glow wire flammability; Insulation and electrical protection measurement; Mechanical assessment; Needle flame; Proof and comparative tracking index; Temperature; Visual examination AS/NZS 60598.1, IEC 60598-1 and EN 60598-1 and the associated Part 2 series of standards:
Part 2.1; Part 2.2; Part 2.3; Part 2.4; Part 2.5; Part 2.7; Part 2.8; Part 2.10; Part 2.12; Part 2.13; Part 2.18; Part 2.19; Part 2.20; Part 2.21; Part 2.22; Part 2.23; Part 2.25
SA/SNZ TS 1158.6
Evaluation of consumer and industrial lighting, optical systems and eyewear Automotive lights; General lighting - Fluorescent lamps; General lighting - Incandescent lamps; General lighting - LED and other solid state lamps; LED and other solid state lighting sources Blue light hazard; Chromaticity; Colour; Colour rendering indices; Colour spacial uniformity; Correlated colour temperature; Cyanosis observation index; Displacement factor; Distribution of luminous intensity; Endurance; Flicker and time modulated effects; Illuminance; Impedance; Lamp circuit power (LCP); Light output; Lumen depreciation; Lumen maintenance; Luminance; Luminous efficacy; Luminous flux; Maintained luminous efficacy; Median lifetime testing; Melanopic ratio (melanopic factor); Power AC and DC; Power factor; Temperature - In-situ; Voltage Calculation; Calculation from measured luminous flux and power; Direct comparison against a reference meter; Direct measurement by goniophotometer; Direct measurement by integrating sphere; Direct measurement using a reference colorimeter; Direct measurement using a reference meter; Direct measurement using a reference spectrophotometer; Direct measurement using a reference standard; Visual examination

AS 1680.3;

CIE 121; CIE 84; IES LM-79; CIE S025; CIE 15.2; CIE 43;

AS/NZS 1680.2.5; 

IES TM 21 (lumen depreciation method) and IES LM 84 (Annex A);

IEC TR 62778;
IEC TR 64517-1;
IEC TR 63158;
IEC 62612;

AS/NZS 60598.1, IEC 60598-1 and EN 60598-1 and the associated Part 2 series of standards:
Part 2.1; Part 2.2; Part 2.4;Part 2.5; Part 2.7;Part 2.8; Part 2.10; Part 2.12; Part 2.13; Part 2.18; Part 2.19; Part 2.20; Part 2.21; Part 2.23; Part 2.25
Aviation signalling; Lighting for roads and public spaces; Maritime signalling Blue light hazard; Broadband responsivity; Chromaticity; Colour; Colour rendering indices; Colour spacial uniformity; Correlated colour temperature; Cyanosis observation index; Device load and annual energy consumption for unmetered devices; Distribution of luminous intensity; Endurance; Flicker and time modulated effects; Illuminance; Impedance; Lamp circuit power (LCP); Lamp efficacy; Light output; Luminance; Luminous flux; Power; Power factor; Temperature - In-situ; Voltage Calculation; Direct measurement by goniophotometer; Direct measurement by integrating sphere; Direct measurement using a reference meter AS/NZS 1158, SA/SNZ TS 1158.6; CIE 121; CIE S025, CIE 15.2, CIE 43 and IES LM-79;
IEC TR 62778; IEC TR 61547-1; IEC TR 63158;
Australian Energy Market Operator (AEMO) NEM Load Table for Unmetered Loads on Road lighting luminaires;
AS/NZS 60598.1, IEC 60598-1 and EN 60598-1 Clause 12 only and the associated Part 2 series of standards:
Part 2.1; Part 2.2; Part 2.3; Part 2.4; Part 2.5; Part 2.7; Part 2.8; Part 2.10; Part 2.12; Part 2.13; Part 2.18; Part 2.19; Part 2.20; Part 2.21; Part 2.22; Part 2.23; Part 2.25;
IES TM 21 (lumen depreciation method) and IES LM 84 (Annex A);
CASA Manual of Standards Part - 139 - Aerodromes; Maritime Safety Committee - 253 (83)
Emergency evacuation lighting and exit luminaires Blue light hazard; Chromaticity; Classification of emergency luminaires; Distribution of luminous intensity; Endurance; Illuminance; Impedance; Lamp circuit power (LCP); Lumen maintenance; Luminance; Power; Power AC and DC; Power factor; Temperature - In-situ; Voltage Calculation; Direct comparison against a reference meter; Direct measurement by goniophotometer; Direct measurement using a reference colorimeter; Direct measurement using a reference meter; Direct measurement using a reference spectrophotometer; Direct measurement using a reference standard AS/NZS 2293.3;  
AS/NZS 60598.1, IEC 60598-1 and EN 60598-1 and the associated Part 2 series of standards: Part 2.22;
IEC TR 62778;
IES TM 21 (lumen depreciation method) and IES LM 84 (Annex A)
High intensity discharge lamps Broadband responsivity; Chromaticity; Colour; Colour rendering indices; Colour spacial uniformity; Correlated colour temperature; Cyanosis observation index; Distribution of luminous intensity; Endurance; Illuminance; Impedance; Lamp circuit power (LCP); Lamp efficacy; Light output; Luminance; Luminous flux; Power; Power factor; Temperature - In-situ; Voltage Calculation; Direct measurement by goniophotometer; Direct measurement by integrating sphere; Direct measurement using a reference meter CIE 43, CIE S025, CIE 15.2, CIE 43 and IES LM-79; AS/NZS 1680.2.5;
IES TM 21 (lumen depreciation method) and IES LM 84 (Annex A)
Evaluation of electrical appliances and devices - Energy efficiency classification Lamps Energy labelling and minimum energy performance standards (MEPS) evaluation Calculations for energy labelling; Evaluation of test results against stated performance criteria; Visual assessment of marking and other attributes against stated criteria AEMO unmetered load guideline - determination of device load and annual energy consumption for unmetered device types (as per section 7 part 11);
AS 4934.1 and AS 4934.2 Minimum Energy Performance Standards (MEPS);
Greenhouse and Energy Minimum Standards (Incandescent lamps for general lighting services) Determination 2015 and 2016;
AS 4847.1 and AS 4847.2 Minimum Energy Performance Standards (MEPS);
AS 4782.1 and AS 4782.2 Minimum Energy Performance Standards (MEPS) 		including incandescent lamps and LED luminaires
Evaluation of electrical appliances and devices - Performance Luminaires, lamps and related items Standby power Not applicable AS/NZS 62301; IEC 62301

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.