LMATS Pty Ltd

Site

LMATS Melbourne Laboratory

Accreditation No.

15840

Site No.

17127

Date of Accreditation

03 Jul 2008

Address

6 Techno Park Drive
Williamstown, VIC 3016
Australia

lmats.com.au

Contact

Ms Sakshi Kumar P: +61 (03) 93999199

Availability

Services available to external clients

Scope of Accreditation

Print scopes
LMATS Melbourne Laboratory

ISO/IEC 17025 (2017)

Infrastructure and Asset Integrity

Service Product Determinant Technique Procedure Limitations
Evaluation of mechanical performance of pressure equipment Metallic storage vessels; Piping; Pressure fittings; Pressure vessels; Valves Hydrostatic pressure Not applicable AS 1579 Appendix F, AS 1631 Section 9.1, AS 2885.5 Section 7.8 (Type 1), AS 4037 Section 17, ASME B31.3 Section 345.4, AS 2885.5 Section 7.9 (Type A) Above ground and exposed pipe sections up to 50 MPa
Piping; Pressure fittings; Valves Hydrostatic pressure; Leakage Not applicable AS 1579 Appendix F, AS 1631 Section 9.1, AS 2885.5 Section 7.8 (Type 1), AS 4037 Section 17, ASME B31.3 Section 345.4, AS 2885.5 Section 7.9 (Type A) Above ground and exposed pipe sections up to 50 MPa
Leak evaluation of welds Metallic storage vessels Leakage Differential pressure box ASME V Article 10
Non-destructive testing (NDT) - Electromagnetic testing Castings - Austenitic stainless steel and duplex metals; Metallic tubes - Ferromagnetic materials; Rolled or wrought steel products; Welded joints - Stainless steel, austenitic and duplex materials Ferrite number Ferrite meter
Castings - Cast irons, steel and alloy steels; Castings - Non-ferrous metals and alloys; Rolled or wrought non-ferrous materials; Rolled or wrought steel products Conductivity Conductivity meter
Coatings Coating thickness High frequency eddy current


Composite materials; Metallic tubes - Non-ferromagnetic materials; Rolled or wrought non-ferrous materials Defect detection and characterisation Low frequency eddy current
Metallic surfaces Defect detection and characterisation High frequency eddy current
Metallic tubes - Non-ferromagnetic materials Profiling Multiple frequency eddy current
Non-destructive testing (NDT) - Electromagnetic testing - Specialised - Eddy current array Metallic surfaces Defect detection and characterisation Not applicable
Non-destructive testing (NDT) - Magnetic particle testing Metallic surfaces - Magnetic Defect detection and characterisation AC magnetic flow; DC magnetic flow
Non-destructive testing (NDT) - Penetrant testing Metallic surfaces Defect detection and characterisation Solvent removable; Water washable
Non-destructive testing (NDT) - Radiographic testing Castings - Cast irons, steel and alloy steels; Castings - Non-ferrous metals and alloys; Composite materials; Rolled or wrought aluminium products; Rolled or wrought steel products; Welded joints - Aluminium alloys; Welded joints - Clad and overlaid steel; Welded joints - Copper and copper-nickel alloys; Welded joints - Ferritic materials; Welded joints - Stainless steel, austenitic and duplex materials; Welded joints - Titanium and titanium alloys Defect detection and characterisation Film radiography
Metallic components Product geometry Film radiography
Metallic piping; Metallic tubes - Ferromagnetic materials; Metallic tubes - Non-ferromagnetic materials Material profiling; Wall thickness Film radiography
Non-destructive testing (NDT) - Radiographic testing - Specialised - Computed radiography Castings - Cast irons, steel and alloy steels; Castings - Non-ferrous metals and alloys; Composite materials; Rolled or wrought aluminium products; Rolled or wrought steel products; Welded joints - Aluminium alloys; Welded joints - Clad and overlaid steel; Welded joints - Copper and copper-nickel alloys; Welded joints - Ferritic materials; Welded joints - Stainless steel, austenitic and duplex materials; Welded joints - Titanium and titanium alloys Defect detection and characterisation Not applicable
Metallic piping; Metallic tubes - Ferromagnetic materials; Metallic tubes - Non-ferromagnetic materials Material profiling; Wall thickness Not applicable
Non-destructive testing (NDT) - Ultrasonic testing Bonded metals; Castings - Cast irons, steel and alloy steels; Castings - Non-ferrous metals and alloys; Rolled or wrought non-ferrous materials; Rolled or wrought steel products; Welded joints - Aluminium alloys; Welded joints - Clad and overlaid steel; Welded joints - Ferritic materials; Welded joints - Stainless steel, austenitic and duplex materials Defect detection and characterisation A-scan - Manual
Castings; Forgings; Metallic components; Metallic piping; Metallic plate; Metallic tubes - Ferromagnetic materials; Metallic tubes - Non-ferromagnetic materials Material thickness - Spot/grid only A-scan - Manual; Thickness meter
Material loss characterisation; Profiling A-scan - Manual
Non-destructive testing (NDT) - Ultrasonic testing - Specialised - Phased array (PAUT) Bonded metals; Castings - Cast irons, steel and alloy steels; Castings - Non-ferrous metals and alloys; Rolled or wrought non-ferrous materials; Rolled or wrought steel products; Welded joints - Aluminium alloys; Welded joints - Clad and overlaid steel; Welded joints - Ferritic materials; Welded joints - Stainless steel, austenitic and duplex materials Defect detection and characterisation Manual
Castings; Forgings; Metallic components; Metallic piping; Metallic plate; Metallic tubes - Ferromagnetic materials; Metallic tubes - Non-ferromagnetic materials Material loss; Profiling Manual
Non-destructive testing (NDT) - Ultrasonic testing - Specialised - Time of flight diffraction (ToFD) Bonded metals; Castings - Cast irons, steel and alloy steels; Castings - Non-ferrous metals and alloys; Rolled or wrought non-ferrous products; Rolled or wrought steel products; Welded joints - Aluminium alloys; Welded joints - Clad and overlaid steel; Welded joints - Ferritic materials; Welded joints - Stainless steel, austenitic and duplex materials Defect detection and characterisation Manual
Non-destructive testing (NDT) - Visual testing - During service life Castings; Forgings; Rolled products; Welded joints Defect detection Visual testing Castings - Valve bodies, piping components, locomotive engine components
Forgings - Valve components, pressure vessel attachments, locomotive engine components
Rolled products - Pressure vessel and structural plates and sections
Welded joints - Pressure vessel and structural welds, including pipe welds
Non-destructive testing (NDT) - Visual testing - Prior to initial service Castings; Forgings; Rolled products; Welded joints Defect detection Visual testing

ISO/IEC 17025 (2017)

Manufactured Goods

Service Product Determinant Technique Procedure Limitations
Evaluation of access protection products Edge protection (including guardrails and guardrail posts) Deflection; Rigidity; Strength Not applicable

AS 1657 Section 6.1.2, Appendices B and C
Material performance evaluation of elastomers, plastics and composite products Pipe material and related products Peel strength; Tensile properties Tensile tests with load stress and cross-head control

ISO 13953

ISO 13954

 Butt joints
Material performance evaluation of metal products Fixtures and components Tensile properties Not applicable

LMATS in-house procedure TP-ME-02

500 N to 500 kN
Prepared metallic test specimens; Tubing/piping Bending properties; Compression; Flattening properties; Shear modulus; Shear strength Not applicable

LMATS in-house procedure TPME-03, AS/NZS 1163 Section 10; AS 2505.3; ASTM A370

Compression - 500 N to 500 kN
Prepared metallic test specimens; Welded test specimens Hardness Brinell; Rockwell - Scale B; Rockwell - Scale C; Vickers

AS 1816.1; ASTM A370; ASTM E10; ISO 6506-1;AS 1815.1; ASTM E18; ASTM E384; ISO 6508.1;AS 1817.1; ISO 9015-1; ISO 9015-2; ISO 6507-1; AS 2205.6.1

Brinell 4.9 to 29.4 kN including tests at 29.4 kN using portable hardness testers; Vickers 9.8 N to 490 N and Vickers microhardness up to 9.8 N
Tensile properties All-weld-metal tensile; Axial tensile; Longitudinal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse butt tensile; Transverse joggle-butt tensile; Transverse tensile; Uniaxial tension

AS 1391, ASTM A370, ASTM E8,ISO 6892-1,AS 2205.2, ISO 4136, ISO 5178, ISO 9018, AS 3992 Section 13.2, ASME IX QW150 and QB150, AWS D1.1 Section 4 and AWS D1.6 Section 4

500 N to 500 kN 
Bending properties Longitudinal guided bend; Transverse guided bend

AS 2505.1; AS 2205.2; AS 2205.5, ASTM A370, AS 2205.3.1, AS 2205.3.2, AS 2205.3.3, AS 3992 Section 13.3, ASME IX QW160, AWS D1.1 Section 4, AWS D1.6 Section 4,

 ISO 5173
Charpy impact toughness Charpy - Lateral expansion; Charpy V-notch - Impact value

AS 1544.2; AS 2205.7.1; ASTM E23; ISO 148-1

Temperature range - ambient down to -70°C and at -196°C

Excluding lateral expansion for ASTM E23
Reinforcing bar and steel prestressing materials for concrete Bending properties Simple bend

AS/NZS 4671 clause 7.2.3
Geometric properties Indentation geometry; Mass per unit length; Rib geometry

AS 4671 Appendices C 3.1, C 3.2, C 3.3
Tensile properties Longitudinal tensile

AS/NZS 4671 Clause 7.2.2; Appendix C2.2
Threaded fasteners, bolts and nuts Tensile properties Not applicable

 AS 1391; AS 4291.1

500 N to 500 kN
Tubing/piping Bending properties; Flattening properties; Shear strength Not applicable

AS/NZS 1163 Section 10, AS 2505.3, ASTM A370
Welded test specimens Cracking Hot cracking

AS 2205.9.1
Shear strength Tensile tests with load stress and cross-head control

 AS 2205.8.1, AS 2205.8.2, ISO 15630-2 
Torque on stud welds Not applicable

ASME IX QW 192
Nick-break fracture Visual examination

AS 2205.4.1, ISO 9017 
Fillet-break fracture Macroscopic examination; Visual examination

AS 2205.4.2; AWS D1.1 Section 4; ASME Section IX QW 12; AWS D1.6 Section 46; ISO 9017
Macroscopic examination Visual examination

AS 3992 Section 13.5; ASME IX; AWS D1.1; AWS D1.6

 Including brazed specimens
Macroscopic examination Macroscopic examination

AS 2205.5.1, ISO 17639
Wire, wire strands and coated wire products Bending properties Reverse bend; Simple bend

AS 2505.2, AS2505.4
Wrapping Not applicable

AS 2505.6, ASTM A370
Tensile properties Cord breaking strength of conveyor wire; Longitudinal tensile

 AS 1391, ASTM A370, ASTM E8, ISO 6892.1
Material performance evaluation of paint and related products Architectural coatings; Automotive coatings; Decorative coatings; Industrial coatings; Marine coatings Residual contaminants - Chlorides; Residual contaminants - Oil or water droplet contamination; Residual contaminants - Presence of mill scale; Residual contaminants - Soluble salts of iron; Residual contaminants - Surface dust Not applicable

AS 3894.6, Methods A, E
Ductility Not applicable

AS 1580.402.1
Hot water immersion Not applicable

AS 4822 Appendix F
Degree of cure Barcol hardness impressor

AS 3894.4 Method D

ISO/IEC 17025 (2017)

Materials

Service Product Determinant Technique Procedure Limitations
Analysis of metals and alloys Cast irons; Chromium and chromium alloys; High alloy steels; Nickel and nickel alloys; Tool steels Comparative indication of material grade and alloy type Portable X-ray fluorescence equipment UNS# A13840, A95083, A96063, C36000, C62700, C71300, G43400, C83600, G86200, N06002, N09901, R30605, R30816, S17400, S30300, S30400, S31254, S31600, S31700, S32100, S32205, S32550, S32750, S43100, T 20813, SAE# G4130, G4140, G5200
Material performance evaluation of refractories, ceramics and related materials Silicate glasses Microhardness of glass beads Not applicable

ASTM E 384

up to 9.8 N
Metallic corrosion evaluation Aluminium and aluminium alloys Corrosion resistance; Intergranular corrosion resistance Mass loss after exposure to nitric acid (NAMLT test); Not applicable ASTM G67; ASTM G66 5000 Series Aluminium Alloys
Aluminium and aluminium alloys; Austenitic, duplex and nickel-chromium alloys; Copper and copper alloys; Ferrous materials Salt spray resistance Neutral salt spray (NSS) ASTM B117, AS 2331.3.1, ISO 9227
Austenitic, duplex and nickel-chromium alloys Pitting corrosion resistance Ferric chloride pitting

ASTM G48 Method A
Intergranular attack or end grain pitting on metals caused by aircraft chemical processes; Intergranular corrosion resistance Acidified copper sulfate exposure - Mony-Penny-Strauss; Copper-copper sulfate-sulfuric acid; Ferric sulfate - Sulfuric acid; Nitric acid; Nitric acid exposure - Huey; Oxalic acid etch

AS 2038 Section 6,Section 7; AS 2205.10.1;  ASTM A262 Practices A,B,C,E, ASTM G28 Method A; ASTM F2111 Sections 7.4, 7.5, 7.6
Detrimental intermetallic phase Charpy V-notch - Impact value; Ferric chloride corrosion test; Sodium hydroxide etch test

ASTM A923 Methods A,B,C
Chemical corrosion treatment materials Adhesion Not applicable

AS 3894.9 Methods A, B, C, ASTM D3359 Methods A, B
Chemical corrosion treatment materials; Plating Coating mass Dissolution - Strip, weigh and analytical

AS 2331.2.1,AS 4680 Appendix G2
Coating mass Dissolution - Strip, weigh and analytical

AS 1627.6 Appendix B4
Coating thickness Microscopic examination

AS 2331.1.1, AS 1214 Appendix A; ASTM B487
Copper and copper alloys Dezincification resistance Classical

AS 2345
Stress corrosion resistance Mercurious nitrate

AS 2136 and ASTM B154 
Metallographic evaluation of metals and alloys Aluminium and aluminium alloys Anodising thickness Not applicable

AS 1231 Section 7.2, ASTM B487, ISO 1463
Depth of cladding Microscopic examination

ASTM B487
Depth of surface defects Microscopic examination

ASTM E3
Phase identification and proportion Microscopic examination

ASTM E562
Grain size Microscopic examination

AS 1733, ASTM E112, ISO 643
Austenitic, duplex and nickel-chromium alloys; Magnesium alloys; Nickel and nickel alloys; Titanium and titanium alloys Grain size Microscopic examination

AS 1733, ASTM E112, ISO 643
Phase identification and proportion Microscopic examination

 ASTM E562
Depth of surface defects Microscopic examination

ASTM E3
Copper and copper alloys Depth of surface defects Microscopic examination

ASTM E3
Grain size Microscopic examination

AS 1733, ASTM E112, ISO 643
Phase identification and proportion Microscopic examination

ASTM E562
Ferrous materials Embrittlement Not applicable

ASTM A143
Grain size Microscopic examination

AS 1733, ASTM E112, ISO 643
Non-metallic inclusion content Microscopic examination

AS 2197
Case depth and depth of decarburisation Hardness traverse; Macroscopic examination; Microscopic examination

AS 1982 Sections 6.1, 6.2, 6.3, AS 2003 Sections 6.1, 6.2, ASTM F2328, ISO 2639, ISO 3754, SAE J423, 
Non-metallic inclusion content Macroscopic examination; Microscopic examination

AS 2087, ASTM E45 Section 5.1.3
Graphite type and distribution in cast irons Microscopic examination

ISO 945
Phase identification and proportion Microscopic examination

ASTM E562
Detection of iron on passivated steel - Contamination test Copper sulfate; Potassium ferricyanide nitric acid

ASTM A380 Sections 7.2.5.3 and 7.3.4, ASTM A967 Practices D and E
Depth of surface defects Microscopic examination

ASTM E3

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.