ENERGY QUEENSLAND LIMITED

Site

Meter Field Services

Accreditation No.

74

Site No.

20790

Date of Accreditation

Address

524 Bilsen Road
Geebung, QLD 4034
Australia

yurika.com.au

Contact

Mr Dave Pritchard P: +61 0416103283

Availability

Services available to external clients

Scope of Accreditation

Withdrawn

ISO/IEC 17025 (2005)

Calibration

  • The uncertainty of measurement is reported as an expanded uncertainty having a level of confidence of 95% unless stated otherwise
Withdrawn
Service Product Determinant Technique Procedure Limitations
DC and low frequency electrical metrology - Electrical measurement and test equipment Electricity meters Active energy; Reactive energy Direct measurement against a reference standard

Watthour meters 

At 50 Hz, 63.5 V to 240 V, 0.2 A to 20 A

Varhour meters

At 50 Hz, 63.5 V to 240 V, 0.5 A to 20 A


Capability

with Calibration and Measurement Capability of -

Watthour meters

0.06%/cosΦ, three phase

Varhour meters

0.5% from zero to 0.5 power factor lag


DC and low frequency electrical metrology - High-voltage/high-current standards and equipmentIncluding on site calibrations in-situ Current transformers; Voltage transformers Current; Phase displacement; Voltage Comparison with a reference standard

Current transformers (CTs) at 50 Hz
and test points specified in AS 60044 Parts 1 and 3, AS 1675


Voltage transformers (VTs) at 50 Hz
and test points specified in AS 60044 Parts 2 and 3, AS 1243

Capability

Including on site calibrations

with Calibration and Measurement Capability of -

Current transformers (CTs) at 50 Hz

with rated primary currents from 1 A to 10 000 A
with rated secondary currents of 1 A or 5 A
and at 0.5 lagging to unity power-factor burden

0.04% for current error
0.04 crad for phase angle error


Voltage transformers (VTs) at 50 Hz

with rated primary voltages from 110/√ 3 V to 132/√ 3 kV
and rated secondary voltages of 110/√ 3 V or 110 V
and at 0.1 lagging to unity power-factor burden

0.04% for voltage error
0.04 crad for phase angle error


The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.