DNV Singapore Pte. Ltd.

Site

Structural Integrity and Materials Technologies

Accreditation No.

2218

Site No.

2211

Date of Accreditation

04 Aug 1987

Address

158A Gul Cir, SINGAPORE 629616
0
Singapore

dnvgl.com

Contact

Mr Da Qin Xu P: 65 66905380

Availability

Services available to external clients

Scope of Accreditation

Print scopes

Withdrawn 29 Jul 2022

Voluntary

Structural Integrity and Materials Technologies

ISO/IEC 17025 (2005)

Infrastructure and Asset Integrity

Withdrawn
Service Product Determinant Technique Procedure Limitations
Evaluation of geometric properties of structures and equipment Equipment modules; Structures and assemblies Centre of gravity; Proof load; Weight Single and multiple compression load cells; Single and multiple suspension using tension load cells

In-house procedure QAD-SL-24 

ISO/IEC 17025 (2017)

Manufactured Goods

Withdrawn
Service Product Determinant Technique Procedure Limitations
Material performance evaluation of metal products Prepared metallic test specimens Hardness Vickers

ASTM E384, DNV OS F101, DNVGL-OS-C401 Chapter 2 Section 1 Clause 3.1.7, EEMUA 158 Section 4.4.4.4, ISO 6507-1, ISO 15156-2 Section 7.3, ISO 15156-3 Section 6.2.2.2, NACE MR0175 Sections 6.2.2, 7.3

Tests in the range 9.8 to 980 N
Hardness Rockwell - Scale B; Rockwell - Scale C; Rockwell - Scale N

ASTM E18, ISO 6508-1, ISO 15156-2, 3 and NACE MR 0175-2, 3
Prepared metallic test specimens; Welded test specimens Hardness Brinell

ASTM E10 and ISO 6506-1, AS 2205.6.1, AS 2885-2, ASTM E10, ISO 6506-1

Tests in the range 9.8 to 294 N (1 mm ball)
Fracture toughness Crack tip opening displacement

API 2Z, ASTM E1820, ASTM E1290, BS EN ISO 15653, BS 7448, DNV OS F101, DNV-RP-F108, EEMUA 158, ISO 12135

API 1104 Section A3.4.3.3, AS 2885-2, AS 2205.7.3,  AWS B4.0,

tests from -60°C to ambient temperature
Tensile properties All-weld-metal tensile; Axial tensile; Longitudinal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse butt tensile; Transverse joggle-butt tensile; Transverse tensile; Uniaxial tension

API 2H Section 6, API 2W Section 6, API 5L Section 9.3, API 1104, AS 1391, ASTM A 370, ASTM A 770, ASTM B557, ASTM E8, BS EN 10164, BS EN ISO 6892-1, DNV OS F101, DNVGL-OS-B101 Chapter 2 Section 6 Clause 2.1, DNVGL-OS-C401 Chapter 2 Section 1 Clause 2.1, EEMUA 158 Sections 4.4.4.1 and 4.4.4.2, ISO 6892, JIS Z2214

AS 2885-2, AS 2205.2.1, ASME IX QW 150, AWS D1.1 Section 4.9.3.4, AWS D1.2 Section 3.7, AWS B4.0, BS EN ISO 15614-1 Section 7.4.2, ISO 4136, ISO 5178

tests at ambient temperature in the range 0.2 to 2500 kN
Impact resistance Charpy V-notch - Impact value

API 5L Section 9.8, ASTM E23, ASTM A370, AS 1544, DNV OS F101, DNVGL-OS-B101 Chapter 2 Section 6 Clause 2.3, DNVGL-OS-C401 Chapter 2 Section 1 Clause 2.3, EEUMA 158 Section 4.4.4.5

AS 2885-2, AS 2205.7.1, AWS D1.1 Section 4.2.5, AWS B4.0, BS EN ISO 15614-1 Section 7.4.5, ISO 9016 

tests from ambient temperature down to -196ºC
Bending properties Not applicable

ASTM A370, AWS D1.1, ASME IX, API 1104, DNV OS F101, DNVGL-OS-C401 Chapter 2 Section 1 Clause 8.3, DNVGL-OS-B101 Chapter 2 Section 6 Clause 2.2

AS 2205.3.1, AS 2885-2, ASTM E190, AWS B4.0, BS EN ISO 15614-1 Section 7.4.3, ISO 5173 
Welded test specimens Macroscopic examination Macroscopic examination

API 1104, AS 2205.5.1, AS 2885-2, ASME IX, ASTM E381, AWS D1.1, DNV OS F101, EEMUA 158 Section 4.4.4.3
Nick-break fracture Macroscopic examination; Visual examination

API 1104
Fillet-break fracture Macroscopic examination; Visual examination

API 1104, ASME IX, AWS D1.1, AWS D1.2 Section 7.4.3
Material performance evaluation of paint and related products Architectural coatings; Industrial coatings; Marine coatings Peel strength

EN 12068, E 10329, ISO 21809-3, CAN/CSA Z245.20-02/Z245.21-02
Hot water immersion Knife test

ISO 21809-3, AS 4822, CAN/CSA Z245.20-02/Z245.21-02, NACE SP034 
Impact Falling weight

ISO 21809-3, EN 10329, EN 12068
Cathodic disbondment Not applicable

ASTM G95, CAN/CSAZ245.20-02/Z245.21-02, EN 10329, EN 12068, ISO 21809
Indentation Penetrometer

ISO 21809-3, AS 4822 Appendix E, EN 10329, EN 1206

ISO/IEC 17025 (2017)

Materials

Withdrawn
Service Product Determinant Technique Procedure Limitations
Metallic corrosion evaluation Austenitic, duplex and nickel-chromium alloys; Ferrous materials Pitting corrosion resistance Critical crevice temperature; Critical pitting temperature

ASTM G48 Method A, DNV OS F101 Appendix B Section C200
Hydrogen induced cracking resistance Not applicable

NACE-TM-0284
Intergranular corrosion resistance Not applicable

ASTM: A262 method E

Immersion corrosion tests
Stress corrosion resistance Mercurious nitrate

NACE-TM-0177

Sulphide Stress Cracking
Metallographic evaluation of metals and alloys Ferrous materials Grain size; Phase identification and proportion Comparison method; Microscopic examination

ASTM E112, ASTM E562

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.