National Measurement Institute (NMI)

Site

Trade Measurement Laboratory, Sydney

Accreditation No.

1

Site No.

15579

Date of Accreditation

Address

36 Bradfield Road
Lindfield West, NSW 2070
Australia

measurement.gov.au

Contact

Mr Umesh Kotwal P: +61 (02) 84673868

Availability

Services conditionally available to external clients

Scope of Accreditation

Withdrawn

Trade Measurement Laboratory, Sydney

ISO/IEC 17025 (2005)

Calibration

  • The uncertainty of measurement is reported as an expanded uncertainty having a level of confidence of 95% unless stated otherwise
Withdrawn
Service Product Determinant Technique Procedure Limitations
Dimensional metrology - Engineering equipment and precision instruments Steel rulers and measuring tapes Length measurements Direct measurement against a reference standard from 1 mm up to 100 m

Capability

with Calibration and Measurement Capability of -
0.008 mm - from 1mm up to 1 m (rigid)
0.3 mm - from 1mm up to 30 m (flexible)
0.6 mm - above 30 m up to 60 m (flexible)
0.9 mm - above 60 m up to 90 m (flexible)
0.9mm - above 90 m up to 100 m (flexible)
Mass - Determination of mass and calibration of weighing devices Industrial mass standards; Mass standards Mass Gravimetric measurement against reference mass from 1 mg up to 6000 kg

Capability

with Calibration and Measurement Capability of -
3 μg - from 1 mg up to 10 mg
5 μg - above 10 mg up to 200 mg
10 μg - above 200 mg up to 2 g
25 μg - above 2 g up to 10 g
1.5 in 10^6 - above 10 g up to 25 kg
1 in 10^5 - from 100 g up to 1500 kg
2 in 10^5 - above 1500 kg to 6000 kg
Pressure metrology - Pressure and vacuum measuring equipment Pressure gauges Gauge pressure By pressure calibrator

from 100 kPa to 4000 kPa

Capability

with Calibration and Measurement Capability of -

0.1% of reading from 100 kPa to 4000 kPa

Temperature metrology - Temperature measuring equipment Digital temperature measuring systems Temperature Measurement against reference standard from -30°C to 100°C

Capability

with Calibration and Measurement Capability of -
0.03°C from -30ºC to 0ºC
0.02°C at 0°C
0.03°C from 0ºC to 100ºC
Volume and density - Industrial volumetric equipment and bulk storage Industrial volumetric proving measures; Standard measures - > 25 L Volume Gravimetric from 1 L to 6000 L

Capability

with Calibration and Measurement Capability of -
0.01% from 1 L to 6000 L
Volume and density - Laboratory volumetric glassware and measures Standard measures - < 50 L; Volumetric glassware and measures Volume Gravimetric 1 mL to 10 L

Capability

with Calibration and Measurement Capability of -
0.005 mL or 1 in 10^4 (whichever is greater) from 1 mL to 10 L

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.