WA Calibrations Pty Ltd

Site

WA Calibrations

Accreditation No.

20838

Site No.

25011

Date of Accreditation

10 May 2021

Address

7 Westonia Link
Baldivis, WA 6171
Australia

wacalibrations.com.au

Contact

Mr Wade Adam P: +61 0430672385

Availability

Services available to external clients

Scope of Accreditation

Print scopes
WA Calibrations

ISO/IEC 17025 (2017)

  • The uncertainty of measurement is reported as an expanded uncertainty having a level of confidence of 95% unless stated otherwise

Calibration

Service Product Determinant Technique Procedure Limitations
Temperature metrology - Ancillary temperature measuring equipment Digital voltmeters (DVM) and digital multimeters (DMM); Multi-channel thermocouple data recorders; Process calibrators Volt to temperature conversion Direct measurement by electrical input

Capability

Including on-site calibrations
with Calibration and Measurement Capability of -
0.2% of reading or 0.6 ºC (whichever is greater) in the range from -40 ºC to 1200 ºC (Type K thermocouple only)
Temperature metrology - Temperature measuring equipment Digital temperature measuring systems Temperature Comparison with a reference standard By in house method WAC CM01

Capability

Including on-site calibrations
with Calibration and Measurement Capability of -
0.5 °C in the range from -196 °C to below -40 °C
0.1 °C in the range from -40 °C to 150 °C
0.3 °C in the range above 150 °C to 250 °C
0.5 °C in the range above 250 °C to 650 °C
Temperature metrology - Temperature standards and reference equipment Dry block calibrators Temperature Direct measurement using a reference standard By in house method WAC CM05

Capability

Including on-site calibrations
with Calibration and Measurement Capability of -
0.2 °C in the range from -40 °C to 150 °C
0.3 °C in the range above 150 °C to 650 °C
Temperature metrology - Verification of controlled enclosures Baths; Freezers; Furnaces; Incubators; Ovens Temperature Direct temperature measurement IEC 60068-3-5 (excluding rate of change of cooling and heating tests)

Capability

Including on-site calibrations
with Calibration and Measurement Capability of -
1 °C in the range from -40 °C to 200 °C
8 °C in the range above 200 °C to 1200 °C
Medical refrigeration equipment Spatial uniformity; Temperature Direct temperature measurement AS 3864.2 (excluding clause 3.6.4)

Capability

Including on-site calibrations
with Calibration and Measurement Capability of
0.8 °C from -40 °C to below 0 °C
0.3 °C from 0 °C to 10 °C

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.