Back to Search Results


Address Details:
3/627 Boundary Rd
ARCHERFIELD, QLD 4108
AUSTRALIA Map
www.mechtest.com.au

Contact Details:
Mr Michael Mansfield
+61(07) 32770100

Availability:
Services available to external clients

SCOPE OF ACCREDITATION   View and Print Scope of Accreditation Printable version

Note: Not all of the columns of the scope of accreditation displayed include data.
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.
Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.



ISO/IEC 17025 (2017)
Infrastructure and Asset Integrity
SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION / RANGE
Evaluation of load handling, rigging and tensioning systems
Anchors and anchor plate assemblies; Embedded items and fixings;
Proof load;
Not applicable;
AMTS Procedure 04-06-03
AS 3850.1 Appendix A
5 to 145 kN, including tests in the field 
Evaluation of mechanical performance of pressure plant, pipelines and equipment
Piping;
Hydrostatic pressure;
Not applicable;
AS 4041 Section 6.6, 6.7
ASME B31.3 Chapter VI clause 345

0 to 172 MPa Including tests in the field

Pressure vessels;
Hydrostatic pressure;
Not applicable;
AS 1210 Sections 5.10 and 5.12, AS 4037 Sections 17 and 21, AS/NZS 3788 Appendix D15 0 to 172 MPa including tests in the field

ISO/IEC 17025 (2017)
Manufactured Goods
SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION / RANGE
Evaluation of access protection products
Balustrades;
Rigidity; Strength; Strength and rigidity of infill supported by the railing system;
Not applicable;
AS 1170.0, AS 1170.1, AS 1657 Section 6 Including tests in the field

Access covers;
Load;
Not applicable;
AS 3996 Appendic C Including tests in the field
Material performance evaluation of elastomers, plastics and composite products
Pipe material and related products;
Bending properties;
Strip bend decohesion;
ISO 21751


Crushing decohesion;
Not applicable;
ISO 13955

Pipe material and related products; Prepared test specimens;
Tensile properties;
Not applicable;
ISO 13953
AMTS-04-06-01


Decohesion; Peel strength;
Not applicable;
ISO 13954; ISO 13956

Prepared test specimens;
Bending properties;
Not applicable;
BS EN 12814-1

Geonets and geocomposites;
Integrity;
Not applicable;
ASTM D6392 Field seams used in joining flexible polymeric sheet geomembranes
Material performance evaluation of metal products
Reinforcing bar and steel prestressing materials for concrete;
Tensile properties;
Not applicable;
AS/NZS 4671, AS/NZS 4672.1, ISO 15630.1, ISO 15630.2, ISO 15630.3
Range 1 to 1000 kN

Threaded fasteners, bolts and nuts;
Bolt assembly performance;
Acceptable degree of tightening under specified load; Elongation; Proof load; Ultimate tensile;
AS/NZS 1252.1 Appendix D4, AS 4291.1, AS/NZS 4291.2, MRTS 78 Section 7.3, RMS B240 Appendix E4
0.2 to 1000 kN


Elongation; Proof load; Ultimate tensile load;
Standard tensile; Wedge tensile;
AS 4291.1, AS/NZS 4291.2, RMS B240 Appendix E4 0.2 to 1000 kN


Hardness;
Rockwell - Scale C; Vickers;
AS/NZS 1252.1 clause 6.6.3, AS 4291.1, AS/NZS 4291.2
Vickers range 49 N to 294 N

Rolled products including bar, strip and metal sheeting;
Bending properties;
Reverse bend; Simple bend; Transverse guided bend;
AS 2505.1

Welded test specimens;
Tensile properties;
All-weld-metal tensile; Axial tensile; Longitudinal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse butt tensile; Transverse joggle-butt tensile; Transverse tensile;
AS 1391, AS 2205.2.1, AS 2205.2.2, AS/NZS 3992, ASME IX QW-150, ASME IX QW -151, ASME IX QW-152, ASME IX QW-153,  ASME IX QW-451, ASME IX QW-462, ASTM E8M, AWS D1.1 Section 4, ISO 4136 1 to 1000 kN


Fillet-break fracture;
Macroscopic examination; Visual examination;
AS/NZS 1665, AS 2205.4.2, ASME IX QW-180, ASME IX QW-182, ISO 9017


Hardness;
Vickers;
AS 1817.1, AS 2205.6.1, ISO 9015-1 weld macro hardness surveys
Vickers range 49 N to 294 N


Macroscopic examination;
Not applicable;
AS/NZS 2205.5.1, AS 1085.20 Appendix H, AS/NZS 1554.1, AS/NZS 3992, ASW D1.1 Section 4, ASME IX QW-183, ASME IX QW-184, ASME IX QW-196.1, ISO 17639


Nick-break fracture;
Macroscopic examination; Visual examination;
AS/NZS 1665, AS/NZS 2205.4.1


Bending properties;
Longitudinal bend; Transverse guided bend;
AS 2205.3.1, AS 2205.3.3, AS/NZS 3992, ASME IX QW-160, ASME IX QW-161, ASME IX QW-162, ASME IX QW-163, ASME IX QW-166, ISO/EN 5173


Shear strength;
Not applicable;
AWS B4.0, clause 5; ASME IX QW-196.2.1


Impact resistance;
Charpy - Assessment of fracture appearance; Charpy - Lateral expansion; Charpy V-notch - Impact value;
AS 1544.2, AS 1544.5, AS 2205.7.1, ASTM E23, ASTM A370, ISO 148-1, ISO 9016 At -196 and from -40 to 175 C

Prepared metallic test specimens;
Impact resistance;
Charpy - Assessment of fracture appearance; Charpy - Lateral expansion; Charpy V-notch - Impact value;
AS 1544.2, AS 1544-5, ISO 148-1,
ASTM E23,
ASTM A370
at -196 and from -20 to 174 C


Tensile properties;
Longitudinal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse tensile;
AS 1391, ASTM A370, ASTM E8M, ASTM F606M, ISO 6892-1, AMTS-04-06-01 1 to 1000 kN


Hardness;
Rockwell - Scale A; Rockwell - Scale B; Rockwell - Scale C; Vickers;
AS 1815.1, AS 1817.1, ASTM E384, ISO 6507-1, ISO 6508-1
Vickers range 49 N to 294 N
Mechanical performance evaluation of ladders, racks, scaffolds and supports
Scaffolding and scaffolding components;
Bending properties; Breaking load; Coefficient of friction; Compression; Distortion; Overload; Stability; Static foot friction; Stiffness; Strength; Sway; Torque;
Not applicable;
AS/NZS 1576.2 Appendices A, B, C, D, E, F, G, H, I, J, K, L, M, N
AS/NZS 1576.3 Appendices A, B, C, D, E, F, G, H
AS 1577 Appendices A, B, C, D
Including tests in the field