Back to Search Results


Address Details:
3/627 Boundary Rd
ARCHERFIELD, QLD 4108
AUSTRALIA Map
www.amtservices.com.au

Contact Details:
Mr Michael Mansfield
+61 0490706508

Availability:
Services available to external clients

SCOPE OF ACCREDITATION   View and Print Scope of Accreditation Printable version

Note: Not all of the columns of the scope of accreditation displayed include data.
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.
Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.



ISO/IEC 17025 (2005)
Manufactured Goods
SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION / RANGE
Material performance evaluation of elastomers, plastics and composite products
Pipe material and related products;
Bending properties;
Strip bend decohesion;
ISO 21751


Crushing decohesion;
Not applicable;
ISO 13955

Pipe material and related products; Prepared test specimens;
Tensile properties;
Not applicable;
ISO 13953
AMTS-04-06-01


Decohesion; Peel strength;
Not applicable;
ISO 13954; ISO 13956

Prepared test specimens;
Bending properties;
Not applicable;
BS EN 12814-1

Geonets and geocomposites;
Integrity;
Not applicable;
ASTM D6392

Field seams used in joining flexible polymeric sheet geomembranes


Material performance evaluation of metal products
Threaded fasteners, bolts and nuts;
Bolt assembly performance;
Acceptable degree of tightening under specified load; Elongation; Proof load; Ultimate tensile;
AS 1252.1 Appendix D4, AS 4291.1, AS/NZS 4291.2, MRTS 78 Section 7.3, RMS B240 Appendix E4 1 to 1000 kN


Elongation; Proof load; Ultimate tensile load;
Standard tensile; Wedge tensile;
AS 4291.1, AS/NZS 4291.2, RMS B240 Appendix E4 1 to 1000 kN


Hardness;
Rockwell - Scale C; Vickers;
AS 1252.1 clause 6.6.3, AS 4291.1, AS/NZS 4291.2 Vickers range 49 N to 294 N

Rolled products including bar, strip and metal sheeting;
Bending properties;
Reverse bend; Simple bend; Transverse guided bend;
AS 2505.1

Welded test specimens;
Tensile properties;
All-weld-metal tensile; Axial tensile; Longitudinal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse butt tensile; Transverse joggle-butt tensile; Transverse tensile;
AS 1391, AS 2205.2.1, AS 2205.2.2, AS/NZS 3992, ASME IX QW-150, ASME IX QW -151, ASME IX QW-152, ASME IX QW-153,  ASME IX QW-451, ASME IX QW-462, ASTM E8M, AWS D1.1 Section 4 1 to 1000 kN


Fillet-break fracture;
Macroscopic examination; Visual examination;
AS 1665, AS 2205.4.2, ASME IX QW-180, ASME IX QW-182 


Hardness;
Vickers;
AS 1817.1, AS 2205.6.1 Vickers range 49 N to 294 N


weld macro hardness surveys



Macroscopic examination;
Not applicable;
AS 2205.5.1, AS 1085.20 Appendix H, AS/NZS 1554.1, AS/NZS 3992, ASW D1.1 Section 4, ASME IX QW-183, ASME IX QW-184, ASME IX QW-196.1


Nick-break fracture;
Macroscopic examination; Visual examination;
AS 1665, AS 2205.4.1


Bending properties;
Longitudinal bend; Transverse guided bend;
AS 2205.3.1, AS 2205.3.3, AS/NZS 3992, ASME IX QW-160, ASME IX QW-161, ASME IX QW-162, ASME IX QW-163, ASME IX QW-166, ISO/EN 5173 


Shear strength;
Not applicable;
AWS B4.0, clause 5; ASME IX QW-196.2.1


Impact resistance;
Charpy - Assessment of fracture appearance; Charpy - Lateral expansion; Charpy V-notch - Impact value;
AS 1544.2, AS 1544.5, AS 2205.7.1, ASTM E23, ASTM A370, ISO 148-1  At -196 and from -20 to 174 C

Prepared metallic test specimens;
Impact resistance;
Charpy - Assessment of fracture appearance; Charpy - Lateral expansion; Charpy V-notch - Impact value;
AS 1544.2, AS 1544-5, ISO 148-1,
ASTM E23,
ASTM A370
at -196 and from -20 to 174 C


Tensile properties;
Longitudinal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse tensile;
AS 1391, ASTM A370, ASTM E8M, ASTM F606M, ISO 6892-1, AMTS-04-06-01 1 to 1000 kN


Hardness;
Rockwell - Scale A; Rockwell - Scale B; Rockwell - Scale C; Vickers;
AS 1815.1, AS 1815.17, ASTM E384, ISO 6507-1, ISO 6508-1 Vickers range 49 N to 294 N