NATA


Facilities and Labs

New Search |

Australian National Testing Laboratories Pty Ltd

Accreditation No: 15698
www.antl.com.au
 
Contact: Mr J Profke
Mobile: 0417 119 000
Phone: 07 3274 0737
Fax: 07 3274 0712
Email:
 
Address:
Unit 17, 15 Suscatand Street,
ROCKLEA
QLD 4106
 
Facilities: Public testing service
Last Modified: 25-AUG-17


This facility complies with the requirements of ISO/IEC 17025:2005

3.25 Performance tests on electrical items and accessories
Determination of strength, pressure, torque, thickness, overflow, temperature and hot-water delivery tests on water heaters by the methods of-

AS 3498 Authorization requirements for plumbing products - Water heaters and hot-water storage tanks, Sections 7.2 and Appendices A, B, C
AS/NZS 4692.1 Electric water heaters - Energy, consumption, performance and general requirements, Sections 2.2.2, 2.2.3, 2.2.4, 5.2.1, 5.2.3, 5.3, 5.5.2.1, 5.6.5
AS/NZS 6400 Sections 2.1, 2.1.4, 2.2, 2.2.4, 2.3, 2.3.4, 2.4, 2.4.4, 2.5, 2.6,2.6.4, 2.7, 2.7.4
.31 Electrical energy consumption
.41 Strength and dimensions of components
.99 Other tests

13.02 Metallic corrosion tests
.06 Dezincification tests for brass
Dezincification tests on copper alloys by the method of AS 2345 Appendix C

13.47 Plumbing and drainage fittings
.01 Baths, basins, sinks, showers
for the following determinations -
endurance, flow, spray angle, temperature, watertightness, flushing, strength by the methods of -

AS/NZS 3662 clauses 5.4.1, 5.4.2, 5.4.3, 5.4.4, 5.5, 5.6.1, 5.6.2 and Appendices B, C, D, E and F (2005)
AS/NZS 3662 clauses 5.5.1, 5.5.2, 5.5.3, 5.5.4, 5.6, 5.7.1, 5.7.2 and Appendices B, C, D, E and F
AS 3982 clauses 1.6.1, 1.6.2, 1.6.3, 1.6.4 and Appendices A, B, C and D
AS 4775 clauses 6.5.1, 7.3.1 and 8.3
AS/NZS 6400 clause 2.1.3

.02 Sanitary ware
for the following determinations -
Discharge, flush, flushing performance, hydrostatic strength, leakage, load, reduced flush, splash tests, watertightness and wetting tests on lavatory (pans and cisterns) and urinal equipment by the methods of -

AS 1172.1 clauses 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8 and Appendices A, B, C, D, E, F, G, H
AS 1172.2 clauses 4.2, 4.3, 4.7 and Appendices A, F
AS 1976 clauses 5.2, 5.3, 5.4 and Appendices A, B, C
AS/NZS 3662 clauses 5.1, 5.2, 5.3, 5.4, 5.5 and Appendices B, C, D, E
AS/NZS 3982 Appendices A, B, C, D
ATS 5200.004 clause 9.3 and Appendix C
ATS 5200.020 clause 9.2, 9.3, 9.4
ATS 5200.021 clauses 9.2, 9.3
ATS 5200.051 clause 9.2 and Appendix B

.03 Taps and valves
for the following determinations -
Backflow, dimensions, distortion, end connections, endurance, finish, flow, flow area, free end, leakage, load, opening/closing, performance, pressure, pressure seal, resistance to bending, resistance to removal, seating, seat sealing, shower hose, spray angle, strength, temperature drop, torque and watertightness tests by the methods of -

AS 1357.2 Clause 3.2, 3.3, 7.2, 7.3, 7.4, 7.5, 9.4 and Appendices E, L, M, N, V and W
AS 1628 clauses 4.2, 4.3, 4.4, 4.5, 5.6 and Appendices B, C, D
AS 1910 clauses 4.2, 4.3, 4.4 and Appendices C, D and E
AS 2419.2 clauses 4.3.2, 4.3.3, 4.3.4, 4.3.5, 4.3.6 and Appendices D3, D4, D5, D6 and D7
AS/NZS 2638.1 clauses 5.1.2, 5.1.3, 5.1.4, 5.1.5, 5.1.6, 5.1.7, 5.1.8, 5.1.9, 5.1.10, 5.1.11, 5.1.12
AS/NZS 2638.2 clauses 3.2, 3.3, 5.1.1, 5.1.2, 5.1.3, 5.1.4, 5.1.5, 5.1.6, 5.1.7, 5.1.8, 5.1.9, 5.1.10, 5.1.11, 5.1.12, 5.1.13, 5.1.14, 5.1.15
AS/NZS 2845.1
AS 3498 Appendices A and B
AS/NZS 3718 clauses 43.11, .3, 4.5, 4.6.2, 4.8, 4.9, 4.10, 4.11, 4.12, 4.15 and Appendices D, F, G, H, I, J, K, L, M, Q
AS 3952 clauses 3.3.1, 3.3.3, 5.1.1, 5.1.2, 5.1.3, 5.4.1 and Appendix A
AS 4032.1 4.3, 4.4, 4.5, 4.6, 4.7, 4.8, 4.9, 4.10 and Appendices D, E, F, G, H, I and J
AS 4032.2 clauses 3.2, 3.3.1, 3.3.2, 3.4, 4.4 and Appendices C, D, F and G
AS 4794 clauses 5.1.2, 5.1.3, 5.1.4, 5.2.2, 5.2.3, 5.2.4 and Appendices D and E
AS 4795 (2006) clauses 5.2.1 Test A, 5.2.2 Test B, 5.2.3 Test C, 5.2.4 Test D, 5.2.5 Test E, 5.2.6 Test F
AS 4796 clauses 4.2, 4.3, 4.4.1, 4.5, 4.7, 4.8 and Appendices E, F, G, H and I
AS 5081 clauses 5.2.2, 5.2.3, 5.2.4, 5.2.5, 5.2.6, 5.3,2, 5.3.3, 5.3.4, 5.3.5, 5.3.6, 5.3.7, 5.3.8, 5.3.9
AS/NZS 6400 clause 2.6.3
ATS 5200.006 clauses 8.1, 8.3, 9.1, 9.2, 9.3, 9.4 and Appendix A
ATS 5200.012 clauses 9.2, 9.4.1, and Appendices B and C
ATS 5200.030 clauses 9.3, 9.4 and Appendix C
ATS 5200.037.2 clauses 8.1, 9.2, 9.3, 9.4 and Appendices B, C, D, F
ATS 5200.453 clause 9
ATS 5200.460 clause 9.1
ATS 5200.467 clauses 8.1, 8.3, 9.1, 9.3.2, 9.4
ATS 5200.476 clauses 9.1,9.2
ATS 5200.477 clauses 9.2, 9.3, 9.4, 9.5 and Appendices B, C, D
ATS 5200.481 clauses 9.2, 9.3, 9.4.1, 9.4.2, 9.4.3, 9.5 and Appendices B and C
ISO/EN 817 clauses 8.3, 8.4, 8.5, 8.6, 8.7, 9.4, 9.5, 10.2, 10.4, 10.5, 10.6, 10.7, 11.2, 12.1, 12.2, 12.3, 13 and Annexes A and B
ISO 5208 clauses 4.8, 4.9, 4.10, 4.11, 4.12 and Tables 1, 2, 3, 4

.04 Pipes, controllers, connections and other fittings
for the following determinations -
Accelerated relaxation, air tightness, bending, compatibility, crack growth, dimensional, endurance, end load, fatigue, flow, freedom from defects, grating/waste, high temperature, impact, joint, leak tightness, liquid infiltration, load, MRS, ovality, performance, pressure, pressure cycling, pull out, pulsation, residual, ring stiffness, seal, sliding, socket fit, strength, thermal cycling, thread forms, torque, trap seal, vacuum and water tightness tests on piping and fittings by the methods of -

AS 1432 clauses 4.3, 5.4.2
AS/NZS 1462.1 clauses 7, 8, 11
AS/NZS 1260 clauses 3.2.1, 3.2.2
AS/NZS 1462.4
AS/NZS 1462.6
AS/NZS 1462.8
AS/NZS 1462.10
AS/NZS 1462.11
AS/NZS 1462.13
AS/NZS 1462.17
AS/NZS 1462.24
AS/NZS 1462.29
AS/NZS 1477 clauses 3.3.1, 3.3.3, 3.3.6, 3.4.1(b), 3.4.2, 3.4.3, 3.4.4, 3.5.1, 3.5.2
AS 1571 clause 8.2
AS 1589 clauses 1.7.4, 1.7.5, 1.9.2, 1.10, 1.13.3 up to DN 80, 3.3.1, 3.3.2, 3.3.3, 3.3.4, 3.3.5, 3.4.1, 3.4.2, 3.4.3, 3.5.1, 3.6.1, 4.9.1, 4.9.2, and Appendices E, G, H
AS 1926.3 clauses 5, 6.1, 6.2 and Appendices A5.1, A5.2, A5.3, A5.4 and B
AS 2280 clauses 2.5.2, 3.1, 3.1.1, 3.1.2.1, 3.1.2.2, 3.1.2.3, 3.1.2.4, 3.5.2.1, 3.5.2.2,4.2.2 and Appendices F and H
AS 2419.3 clauses 4.2, 4.2.3, 4.2.3, 4.3, 4.3.2, 4.3.3, 4.3.4, 4.3.5, 4.3.6
AS/NZS 2492 clauses 3.8, 3.9
AS 2537 (1994) clauses 11.2.1, 11.2.3, 11.2.4, 11.2.5, 11.2.6, 11.2.7, 11.2.8, 11.2.9
AS/NZS 2537.3
AS/NZS 2642.3 clauses 12.2.1, 12.2.2, 12.2.3, 12.2.4, 12.2.5, 12.2.6, 12.2.7, 12.2.8 and Appendices C, D, E and F
AS 2887 clauses 2.6.1, 2.6.3, 2.6.5
AS 2888.1
AS 2888.2
AS 2888.3
AS 2888.4
AS 2888.5
AS 2888.6
AS 2888.7
AS 2888.8
AS 2888.10
AS 3499 Clauses 8.2, 8.4, 8.5, 8.8, 8.9, and Appendix C
AS 3518 (2004)
AS 3688 clauses 3.2, 3.4, 3.5, 3.6, 3.7.1, 3.7.2, 3.8, 4.2, 4.3, 4.4, 4.5, 4.6, 4.7, 4.8, and Appendices C, D, E, F, G, H, I, J, K2 and L
AS/NZS 4129 clauses 1.8, 1.13.1, 1.13.2, 2.4.2, 2.4.3, 2.4.4, 2.4.5, 3.4, 3.5, 4.4.2, 4.4.3, 4.4.4, 4.4.5, 4.4.6 and Appendices D,E
AS/NZS 4130 clauses 9.1, 10.1, 10.2, 10.4
AS 4176 clauses 2.1.1, 2.3.1, 2.3.2, 2.3.3, 2.3.5, 3.1.4, 3.1.5, 3.2.1, 3.2.2, 3.2.5
AS/NZS 4327 clauses 4.1, 4.2 and Appendices B, C, D, E and F
AS/NZS 4401 clauses 6.2, 6.3, 6.4, 7.2, 8
AS/NZS 4441 clauses 10, 11.1.1, 11.1.2, 13.2, 13.3, 13.4
AS/NZS 4765 clauses 3.2.3, 3.2.4, 3.2.7, 3.2.8, 3.2.9, 3.2.10, 3.3.1, 3.3.2, 3.3.3 and Appendices B, D and E
AS/NZS 4793 clauses 4.1.2, 4.1.3, 4.1.5, 4.1.6, 4.4.1
AS/NZS 4798 Clause 3.3, 3.4, 3.5.1, 3.5.2, 4.2, 5.2, 5.3, 5.5, 5.5.5
AS/NZS 5065 clauses 3.3.1, 3.3.2, 3.4.1, 3.4.2, 3.4.3, 5.2
AS 5082.2 clauses 12.1, 12.2 and Appendices C, D, E, F, G and H
ATS 5200.040 clause 9.1
ATS 5200.053
ATS 5200.475 clauses 9.2, 9.3 and Appendices B and C
ATS 5200.477 clause 9.4 and Appendix C
ATS 5200.482
AS/NZS 6400 clause 2.7.3
EN 713
EN 714
EN 1053
EN 1054
EN 1055
EN 12293
EN 12294
EN 12295
ISO 1167.1
ISO 1167.2
ISO 1167.3
ISO 1167.4
ISO 3126
ISO 3459
ISO 3501
ISO 3503
ISO 13257
ISO 13479
ISO 13844
ISO 13845
ISO 13846
ISO 13954
ISO 13955
ISO 16422 clauses 10, 11.1.1, 11.1.2, 13.2, 13.3, 13.4
UK-WIS-4-24-01


13.99 Other materials and products
Dispersal, flow rate, load, nozzle twist, pressure and strength tests on fire hose assemblies by the methods of-
AS/NZS 1221 clauses 2.2.2.2, 2.2.2.3, 3.2.1, 3.2.2.1, 3.2.2.2, 3.2.2.3, 3.2.3, 3.2.4.2, 3.2.4.3 and Appendices B, C, D, E, F and G

Dimensions, flow and vacuum tests on medical suction equipment by the methods of-
AS 2120.3 clause 5.2 and Appendix A

Bending, collapse, compression, construction, dimensions, finish, flexing, form, impact, marking, pull out, resistance to heat, squareness and strength tests on conduits and fittings for electrical installations by the methods of-
AS/NZS 2053.1 clauses 8.1, 8.2, 8.3, 8.4, 9.2, 9.3, 9.4, 9.5, 9.6 and Appendices A, B, C and D
AS/NZS 2053.5 clauses 6, 7, 8, 9, 10 and Appendices AA, BB, CC, DD

Abrasion resistance, adhesion, dimensions, distortion, expansion, flexibility and pressure tests on hose and hose assemblies for air by the methods of-
AS/NZS 2554 clauses 1.6, 2.2.1, 2.2.2, 2.2.3, 2.2.4, 2.3, 2.4 and Appendix B AS 1180.5

Abrasion resistance, ageing, burst, dimensional stability, flexibility, lining adhesion, pressure, pressure loss due to friction and serviceability tests on fire hose-delivery layflat by the methods of-
AS 2792 clauses 3.1.2, 3.1.3, 3.1.4, 3.1.5, 3.1.6, 3.1.7, 3.3.1, 3.3.2, 3.3.3 and Appendices E, F, G, H, I, K, L, M

Construction, cover retention, deflection, dimensions, impact and support capacity tests on Cable trunking systems by the methods of-
AS/NZS 4296 clauses 8, 9, 10 and Appendices D, E, F, G

Burst, endurance and hydrostatic pressure tests on water treatment systems, appliances and components by the methods of-
AS/NZS 3497 clauses 5.2, 5.3, 5.4
ATS 5200.103 clauses 9.2, 9.3, 9.4

Strength tests on water appliances by the methods of-
ATS 5200.104 clause 9.3
ATS 5200.105 clause 9.3

Air gap measurements, backflow, degree of fineness and drainage of commercial food waste disposal units by the method of-
ATS 5200.028 clauses 9.1, 9.2, 9.3, 9.4