PRINT SCOPE


National Association of Testing Authorities, Australia

SCOPE OF ACCREDITATION



Advanced Materials Testing Services Pty Ltd trading as MechTest
--Mech Test
ADVANCED MATERIALS TESTING SERVICES PTY LTD
| Accreditation Number: 20414 | Site Number: 24442 |

Address Details:
3/627 Boundary Rd
ARCHERFIELD, QLD 4108
AUSTRALIA
Website: www.mechtest.com.au
Contact Details:
Mr Michael Mansfield
+61(07) 32770100


Availability:Services available to external clients



Note: Not all of the columns of the scope of accreditation displayed include data.
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.
Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.

 

ISO/IEC 17025 (2017)
Infrastructure and Asset Integrity

SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION/RANGE
Evaluation of load handling, rigging and tensioning systemsAnchors and anchor plate assemblies; Embedded items and fixings; Proof loadNot applicableAMTS Procedure 04-06-03
AS 3850.1 Appendix A
5 to 145 kN, including tests in the field 
Evaluation of mechanical performance of pressure plant, pipelines and equipmentPipingHydrostatic pressureNot applicableAS 4041 Section 6.6, 6.7
ASME B31.3 Chapter VI clause 345

0 to 172 MPa Including tests in the field
Pressure vesselsHydrostatic pressureNot applicableAS 1210 Sections 5.10 and 5.12, AS 4037 Sections 17 and 21, AS/NZS 3788 Appendix D150 to 172 MPa including tests in the field

ISO/IEC 17025 (2017)
Manufactured Goods

SERVICEPRODUCTDETERMINANTTECHNIQUEPROCEDURELIMITATION/RANGE
Evaluation of access protection productsBalustradesRigidity; Strength; Strength and rigidity of infill supported by the railing system; Not applicableAS 1170.0, AS 1170.1, AS 1657 Section 6Including tests in the field
Access coversLoadNot applicableAS 3996 Appendic CIncluding tests in the field

Material performance evaluation of elastomers, plastics and composite productsPipe material and related productsBending propertiesStrip bend decohesionISO 21751
Crushing decohesionNot applicableISO 13955
Pipe material and related products; Prepared test specimens; Tensile propertiesNot applicableISO 13953
AMTS-04-06-01

Decohesion; Peel strength; Not applicableISO 13954; ISO 13956
Prepared test specimensBending propertiesNot applicableBS EN 12814-1
Geonets and geocompositesIntegrityNot applicableASTM D6392Field seams used in joining flexible polymeric sheet geomembranes

Material performance evaluation of metal productsReinforcing bar and steel prestressing materials for concreteTensile propertiesNot applicableAS/NZS 4671, AS/NZS 4672.1, ISO 15630.1, ISO 15630.2, ISO 15630.3
Range 1 to 1000 kN
Threaded fasteners, bolts and nutsBolt assembly performanceAcceptable degree of tightening under specified load; Elongation; Proof load; Ultimate tensile; AS/NZS 1252.1 Appendix D4, AS 4291.1, AS/NZS 4291.2, MRTS 78 Section 7.3, RMS B240 Appendix E4
0.2 to 1000 kN

Elongation; Proof load; Ultimate tensile load; Standard tensile; Wedge tensile; AS 4291.1, AS/NZS 4291.2, RMS B240 Appendix E40.2 to 1000 kN

HardnessRockwell - Scale C; Vickers; AS/NZS 1252.1 clause 6.6.3, AS 4291.1, AS/NZS 4291.2
Vickers range 49 N to 294 N
Rolled products including bar, strip and metal sheetingBending propertiesReverse bend; Simple bend; Transverse guided bend; AS 2505.1
Welded test specimensTensile propertiesAll-weld-metal tensile; Axial tensile; Longitudinal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse butt tensile; Transverse joggle-butt tensile; Transverse tensile; AS 1391, AS 2205.2.1, AS 2205.2.2, AS/NZS 3992, ASME IX QW-150, ASME IX QW -151, ASME IX QW-152, ASME IX QW-153,  ASME IX QW-451, ASME IX QW-462, ASTM E8M, AWS D1.1 Section 41 to 1000 kN

Fillet-break fractureMacroscopic examination; Visual examination; AS/NZS 1665, AS 2205.4.2, ASME IX QW-180, ASME IX QW-182 

HardnessVickersAS 1817.1, AS 2205.6.1weld macro hardness surveys
Vickers range 49 N to 294 N

Macroscopic examinationNot applicableAS/NZS 2205.5.1, AS 1085.20 Appendix H, AS/NZS 1554.1, AS/NZS 3992, ASW D1.1 Section 4, ASME IX QW-183, ASME IX QW-184, ASME IX QW-196.1
Nick-break fractureMacroscopic examination; Visual examination; AS/NZS 1665, AS/NZS 2205.4.1

Bending propertiesLongitudinal bend; Transverse guided bend; AS 2205.3.1, AS 2205.3.3, AS/NZS 3992, ASME IX QW-160, ASME IX QW-161, ASME IX QW-162, ASME IX QW-163, ASME IX QW-166, ISO/EN 5173

Shear strengthNot applicableAWS B4.0, clause 5; ASME IX QW-196.2.1
Impact resistanceCharpy - Assessment of fracture appearance; Charpy - Lateral expansion; Charpy V-notch - Impact value; AS 1544.2, AS 1544.5, AS 2205.7.1, ASTM E23, ASTM A370, ISO 148-1 At -196 and from -20 to 174 C
Prepared metallic test specimensImpact resistanceCharpy - Assessment of fracture appearance; Charpy - Lateral expansion; Charpy V-notch - Impact value; AS 1544.2, AS 1544-5, ISO 148-1,
ASTM E23,
ASTM A370
at -196 and from -20 to 174 C
Tensile propertiesLongitudinal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse tensile; AS 1391, ASTM A370, ASTM E8M, ASTM F606M, ISO 6892-1, AMTS-04-06-011 to 1000 kN

HardnessRockwell - Scale A; Rockwell - Scale B; Rockwell - Scale C; Vickers; AS 1815.1, AS 1817.1, ASTM E384, ISO 6507-1, ISO 6508-1
Vickers range 49 N to 294 N
Mechanical performance evaluation of ladders, racks, scaffolds and supportsScaffolding and scaffolding componentsBending properties; Breaking load; Coefficient of friction; Compression; Distortion; Overload; Stability; Static foot friction; Stiffness; Strength; Sway; Torque; Not applicableAS/NZS 1576.2 Appendices A, B, C, D, E, F, G, H, I, J, K, L, M, N
AS/NZS 1576.3 Appendices A, B, C, D, E, F, G, H
AS 1577 Appendices A, B, C, D
Including tests in the field
| Accreditation Number: 20414 | Site Number: 24442 | Printed on : 11-Aug-2020

 

--------------------- END OF SCOPE ----------------------