Accredited Test Services

Site

Accredited Test Services

Accreditation No.

502

Site No.

4434

Date of Accreditation

14 Sep 1993

Address

2153 Melbourne - Lancefield Road
Monegeetta, VIC 3433
Australia

Contact

Mr Vince Marino P: +61 (03) 54280413

Availability

Services not available to external clients

Accredited Test Services address map

Scope of Accreditation

Print scopes

Withdrawn 22 Sep 2025

Voluntary

Accredited Test Services

ISO/IEC 17025 (2005)

Calibration

  • The uncertainty of measurement is reported as an expanded uncertainty having a level of confidence of 95% unless stated otherwise
Withdrawn
Service Product Determinant Technique Procedure Limitations
Dimensional metrology - Engineering equipment and precision instruments LVDTs Length measurements To be determined

From 0.1 mm to 300 mm

Capability

With calibration and measurement capability of-

0.2% of reading or 0.06 mm (whichever is the greater) from 0.1 mm to 300 mm

ISO/IEC 17025 (2017)

Calibration

  • The uncertainty of measurement is reported as an expanded uncertainty having a level of confidence of 95% unless stated otherwise
Withdrawn
Service Product Determinant Technique Procedure Limitations
Force metrology - Force measuring and testing equipment Load cells Force in compression; Force in tension Comparison measurement with reference load cell

From 1 kN to 90 kN

Capability

With calibration and measurement capability of-

0.5 % of reading From 1 kN to 90 kN

Pressure metrology - Pressure and vacuum measuring equipment Digital pressure gauges; Mechanical pressure gauges; Pressure transducers Gauge pressure By pressure calibrator; Comparison with dead weight tester; Comparison with reference instrument AS 1349 10 kPa to 120 MPa

Capability

with calibration and measurement capability of -

0.06% of reading from 10 kPa to 120 MPa

Piezoelectric pressure transducer (blast pencils); Pressure transducers Dynamic pressure Comparison with a reference transducer from 3.5 kPa (0.5psi) to 345 kPa (50psi)

Capability

with calibration and measurement capability of -
1% of reading from 3.5 kPa to 345 kPa
Vibration metrology - Vibration equipment Accelerometers; Vibration measuring systems Acceleration sensitivity Comparison measurement against reference transducer

from 9.8 m/s2 to 490 m/s2 (1 to 50 gn)

Capability

with calibration and measurement capability of -


Calibration of accelerometers of mass less than 100 g
at accelerations from 9.8 m/s2 to 490 m/s2 (1 to 50 gn)
0.6% of sensitivity from 0.5 Hz up to 10 Hz

0.8% of sensitivity from 11 Hz to 5000 Hz
Calibration of shock accelerometers of mass less than 40 g
from 9.9 x 102 to 9.8 x 104 m/s2 (100 to 10,000 gn)
3.0% of sensitivity with half sine pulse width from 0.1 to 1 ms.

Vibration measuring systems Acceleration sensitivity Comparison measurement against reference transducer

9.8 m/s2 to 490 m/s2 (1 to 50 gn)

Capability

Calibration of vibration measuring systems with accelerometers of mass less than 100 g
at accelerations from 9.8 m/s2 to 490 m/s2 (1 to 50 gn)
with calibration and measurement capability of -
1.2% of sensitivity from 4 Hz up to 100 Hz
0.8% of sensitivity from 100 Hz to 5000 Hz

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.