ASG Exical Pty Ltd as trustee for the ASG Exical Unit Trust

Site

ASG-X-Technologies

Accreditation No.

15464

Site No.

16363

Date of Accreditation

01 Aug 2006

Address

7/1 Trade Park Drive
Tullamarine, VIC 3043
Australia

asgxtech.com.au

Contact

Ms Saeedeh Saadati P: +61 1800256838

Availability

Services available to external clients

ASG Exical Pty Ltd as trustee for the ASG Exical Unit Trust address map

Scope of Accreditation

Print scopes
ASG-X-Technologies

ISO/IEC 17025 (2017)

Calibration

  • The uncertainty of measurement is reported as an expanded uncertainty having a level of confidence of 95% unless stated otherwise
Service Product Determinant Technique Procedure Limitations
Pressure metrology - Pressure and vacuum measuring equipment Digital pressure gauges; Mechanical pressure gauges; Pressure recorders; Pressure transducers; Vacuum gauges Gauge pressure; High vacuum Comparison with dead weight tester; Comparison with reference instrument


Electrical transducers with dc voltage, dc current or resistance outputs

Capability

Gauge pressure calibration

with Calibration and Measurement Capability of-

0.016% reading or 0.016 kPa (whichever is greater) from  -95 kPa to 100 kPa

0.016% reading above 100 kPa to 120 MPa


On-site calibration

with Calibration and Measurement Capability of-

0.13% of reading or 0.13 kPa (whichever is greater) from -95 kPa to 120 MPa
Pressure metrology - Pressure standards Pressure calibrators - Non-dead weight Gauge pressure Comparison with dead weight tester; Comparison with reference instrument

Capability

with Calibration and Measurement Capability of -
0.016% reading or 0.016 kPa (whichever is greater) from -95 kPa to 100 kPa
0.016% of reading above 100 kPa to 120 MPa

The only data displayed is that deemed relevant and necessary for the clear description of the Activities and Services covered by the Scope of Accreditation (SoA).

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.

The Product column may also describe an Item or Material.

The Limitations column may also describe the Range.