NSW Department of Planning and Environment

Site

Climate and Atmospheric Science

Accreditation No.

14209

Site No.

14202

Date of Accreditation

02 Mar 2000

Address

Dock 2 (Building 2), 480 Weerona Road
Lidcombe, NSW 2141
Australia

environment.nsw.gov.au

Contact

Mr M Riley P: +61 (02) 99956302

Availability

Services conditionally available to external clients

Scope of Accreditation

Climate and Atmospheric Science

ISO/IEC 17025 (2017)

Calibration

  • The uncertainty of measurement is reported as an expanded uncertainty having a level of confidence of 95% unless stated otherwise
Service Product Determinant Technique Procedure Limitations
Chemical metrology - Dynamic gas blenders Dynamic gas blenders Mass flow Absolute method

in-house method CAL-001

5 to 200 cm3/min (at STP)  and 500 to 10,000 cm3/min (at STP) 

Capability

Calibration of gas diluters (mass flow controllers)

by in-house method CAL-001

in the ranges 5 to 200 cm3/min (at STP) and 500 to 10,000 cm3/min (at STP)

with calibration and measurement capability of -

0.3 % of full scale

Chemical metrology - Gas analysers Gas analysers Concentration Direct measurement by certified reference material AS 3580 6.1 and in-house methods CAL 004 20 ppb to 520 ppb (nmol/mol and part per 109).

Capability

With calibration and  measurement capability of-

1.4 ppb + 0.4 % of the reading  in the range of 20 ppb to 520 ppb (nmol/mol (part per 109).for ozone

Flow metrology - Flow measuring devices and systems Orifice meters Flow rate Direct measurement by critical flow venturi nozzle

in-house methods CAL-002 and CAL-006

Capability

 with calibration and measurement capability of -
 0.7 % of reading from 1 L/min to 20 L/min

Flow metrology - Environmental flow measuring devices and systems Air sampling pumps and meters Flow rate Comparison with a reference meter; Volumetric transfer in-house method CAL-003

Capability

Calibration of piston meters

with calibration and measurement capability of -

0.7 % of reading from 1 L/min to 20 L/min

ISO/IEC 17025 (2017)

Environment

Service Product Determinant Technique Procedure
Analysis for physical and chemical characteristics Air - Ambient Nitrogen - Oxidised Calculation; Chemiluminescence

AS 3580 5.1

Carbon monoxide Direct reading instrument AS 3580 7.1
Sulfur dioxide Direct reading instrument AS 3580 4.1
Light scattering Nephelometry

AS/NZS 3580 12.1

Particulate matter - PM10; Particulate matter - PM2.5 Tapered element oscillating microbalance (TEOM) AS/NZS 3580.9.13 (Dichot TEOM with FDMS)
Particulate matter - PM2.5 Beta attenuation monitors

AS/NZS 3580 9.12 

Ozone Direct reading instrument AS 3580 6.1
Particulate matter - PM10 Tapered element oscillating microbalance (TEOM)

AS 3580 9.8

Particulate matter - PM10 Beta attenuation monitors

AS/NZS 3580 9.11

Particulate matter - PM10 Tapered element oscillating microbalance (TEOM) AS/NZS 3580.9.16 (TEOM with FDMS)
Meteorological monitoring Atmosphere Pressure Direct reading instrument

AS/NZS 3580 14 (Section 6)

Precipitation Direct reading instrument

AS/NZS 3580 14 (Section 7)

Relative humidity (RH) Direct reading instrument

AS/NZS 3580 14 (Section 4)

Solar radiation Direct reading instrument

AS/NZS 3580 14 (Section 5)

Temperature Direct reading instrument

AS/NZS 3580 14 (Section 3)

Wind direction; Wind speed - Horizontal Ultrasonic anemometer

AS/NZS 3580 14 (Section 2)

Sample collection Air - Ambient Not applicable High volume air sampler (HVAS) Total suspended particulates (TSP) using AS/NZS 3580.9.3

Not applicable Filter paper; Low volume air sampler (LVAS) AS 3580 9.10 (Particulates PM2.5); AS/NZS 3580 1.1 (Site selection for ambient station)

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.