Sika Australia Pty Limited

Site

Concrete and Grout Laboratory

Accreditation No.

14885

Site No.

15034

Date of Accreditation

29 Jul 2004

Address

55 Elizabeth Street
Wetherill Park, NSW 2164
Australia

aus.sika.com

Contact

Mr Nicola Zuppelli P: +61 (02) 97251145

Availability

Services conditionally available to external clients

Sika Australia Pty Limited address map

Scope of Accreditation

Print scopes
Concrete and Grout Laboratory

ISO/IEC 17025 (2017)

Infrastructure and Asset Integrity

Service Product Determinant Technique Procedure Limitations
Evaluation of geotechnical and civil construction material - Aggregate properties Aggregates Particle size distribution Sieve analysis; Sieve analysis of material finer than 75 µm

AS1141.11.1, AS 1141.12

Evaluation of geotechnical and civil construction material - Concrete, grout and mortar chemical tests Concrete, grout and mortar Chloride migration coefficient Nordtest method Nordtest Build 443
Dry residue Halogen in-house method QCM200
Acidity pH in-house method QCM300
Evaluation of geotechnical and civil construction material - Concrete, grout and mortar consistence in situ Concrete, grout and mortar Grout consistency Not applicable

AS 1478.2 Appendices C, D, E

Slump flow Cone

AS 1012.3.1

Evaluation of geotechnical and civil construction material - Concrete, grout and mortar permeability Concrete, grout and mortar Permeability Resistivity as an indicator of permeability Florida Department of Transport method FM 5-578
Evaluation of geotechnical and civil construction material - Concrete, grout and mortar properties Concrete, grout and mortar Mass per unit volume - Hardened concrete Dimensions

AS 1012.12.1

Setting time - Laboratory Not applicable

AS 1012.18

Indirect tensile strength Brazil

AS 1012.10

Air content of freshly mixed concrete Reduced air pressure

AS 1012.4.2

Specific gravity Digital meter

in-house method QCM100A

Compressive strength Cube; Cylinder

AS1012 9 (except clause 4.2), AS 1478 2 Appendix A

Mass per unit volume - Fresh concrete In situ measurement using fixed volume measure

AS 1012.5

Bleeding In situ analysis - Freshly mixed concrete

AS 1012.6

Density Pycnometer

in-house method QCM110

Evaluation of geotechnical and civil construction material - Concrete, grout and mortar specimen manufacture and curing Concrete, grout and mortar Specimen manufacture Mixing concrete in the laboratory

AS 1012.2

Specimen manufacture and curing Manufacture and curing of cylindrical specimens in the laboratory; Manufacture and curing of drying shrinkage specimens in the laboratory; Manufacture and curing of flexural strength specimens in the laboratory

AS 1012.8.1, AS 1012.8.2, AS 1012.8.4

ISO/IEC 17025 (2017)

Materials

Service Product Determinant Technique Procedure Limitations
Analysis of cements and cementitious materials - Properties Cement products Drying shrinkage Not applicable AS 2350.13
Setting time Not applicable

AS/NZS 2350.4

Volume stability Changes in hydraulic grout sample height

ASTM C1090

Sample collection Chemical admixtures Not applicable Not applicable AS 1478.1 Appendix A

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.