Kingle Engineering Pty Ltd

Site

Kingle Laboratory

Accreditation No.

21654

Site No.

26085

Date of Accreditation

24 Aug 2026

Address

54 Barrow Road
Spring Farm, NSW 2570
Australia

kingle.com.au

Contact

Availability

Services available to external clients

Kingle Engineering Pty Ltd address map

Scope of Accreditation

Print scopes
Kingle Laboratory

ISO/IEC 17025 (2017)

Infrastructure and Asset Integrity

Service Product Determinant Technique Procedure Limitations
Evaluation of embedded foundation and structural support systems Screw piles Pile displacement; Proof load; Ultimate strength Static compression loading; Static lateral loading; Static tension loading AS 2159 Section 8 and Appendix A. Including in-situ testing for compression and tension only.
Evaluation of load handling, rigging and tensioning systems Anchors and anchor plate assemblies Proof load; Pull-out resistance Not applicable In-house method KIN-PT-M-01 up to 145 kN
Bins Proof load Not applicable AS 4991 Including on-site testing and limited to lifting lugs only.
Lifting clutches for concrete elements Proof load Not applicable AS 3850.1 Clause 2.6

ISO/IEC 17025 (2017)

Manufactured Goods

Service Product Determinant Technique Procedure Limitations
Evaluation of access protection products Edge protection (including guardrails and guardrail posts) Dynamic load; Static load; Strength; Strength and rigidity of infill supported by the railing system Not applicable AS 1657 Appendices B and C;
 AS/NZS 1170.0 Appendix B;
AS/NZS 4994.1 Section 4 and Appendices A, B, C, D and E 		including walkway
Mechanical performance evaluation of ladders, racks, scaffolds and supports Formwork for concrete Proof load Not applicable AS 3610 Appendix A;
AS 3610 Supp 2 and Appendix CA 		including: metal props (steel or aluminium), ultimate load, metal falsework frame and props assembly up to 8.0 m high and 1000 kN ultimate load
Scaffolding and scaffolding components Bending properties; Coefficient of friction; Distortion; Load carrying capacity; Slip resistance; Stability; Stiffness; Strength; Vertical load carrying capacity Not applicable AS/NZS 1576.2 Appendices A, B, C, D, E, F, G, H, I, J, K, l, M, N;
 AS 1576.3 Appendices A, B, C, D, E, F, G, H;
 AS 1576.5 Appendices A, B, C, D
AS/NZS 1577 Appendices A, B, C, D
AS 1657 Appendix D
AS 1170.1 Sections 2 and 3


 including couplers, splitheads, trestles
Bending properties; Compression; Proof load Not applicable AS 4100 Section 17
AS 4600 Section 8 and Appendix F
 Including columns and beams.
Including structural elements subjected to compression and bending (e.g.column segments, beam sections) within the capacity and dimensional limits of the test facility i.e. Compression: Max load1000 kN and Max length 8.0 m. Bending: Max applied bending moment  100 kN.m and Max span 8.0 m.

The only data displayed is that deemed relevant and necessary for the clear description of the Activities and Services covered by the Scope of Accreditation (SoA).

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.

The Product column may also describe an Item or Material.

The Limitations column may also describe the Range.