LAF Technologies Pty Ltd

Site

LAF Technologies Pty Ltd

Accreditation No.

14775

Site No.

22298

Date of Accreditation

25 Nov 2014

Address

6 Prospect Place
Boronia, VIC 3155
Australia

laftech.com.au

Contact

Mr Brad Green P: +61 1300306002

Availability

Services available to external clients

Scope of Accreditation

LAF Technologies Pty Ltd

ISO/IEC 17025 (2017)

Calibration

  • The uncertainty of measurement is reported as an expanded uncertainty having a level of confidence of 95% unless stated otherwise
Service Product Determinant Technique Procedure Limitations
Flow metrology - Environmental flow measuring devices and systems Microbial air samplers Flow rate Comparison with a reference meter

Capability

with Calibration and Measurement Capability of -
3.5 L/min at 100 L/min
Optical metrology - Particle measuring devices Aerosol photometers Flow rate; Linearity Comparison with a reference standard

Capability

With Calibration and Measurement Capability of -

Calibration of aerosol photometers with oil particulates at flow rates 28 L/min

Measurement of the linearity of the flow rates of aerosol photometers
2% at 100% scale reading
3% at 80% scale reading
4% at 60% scale reading
6% at 40% scale reading
12% at 20% scale reading

Measurement of flow rate
0.57 L/min at 28 L/min
Optical metrology - Particle measuring devices Particle counters - Air Flow rate; Particle count; Particle size Comparison with a reference standard Calibration of airborne particle counters including the requirements of ISO 21501-4

Capability

With Calibration and Measurement Capability of -

Calibration of airborne particle counters
Maximum uncertainty of 2.4% of particle size in the range from 0.2 μm to 30 μm at flow rates from 1 L/min to 100 L/min

The only data displayed is that deemed relevant and necessary for the clear description of the Activities and Services covered by the Scope of Accreditation (SoA).

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.

The Product column may also describe an Item or Material.

The Limitations column may also describe the Range.