LMATS Pty Ltd

Site

LMATS Brisbane Laboratory

Accreditation No.

15840

Site No.

22277

Date of Accreditation

28 Jul 2014

Address

14/121 Kerry Road
Archerfield, QLD 4108
Australia

lmats.com.au

Contact

Mr Joseph Turrell P: +61 0437706716

Availability

Services available to external clients

LMATS Pty Ltd address map

Scope of Accreditation

Print scopes
LMATS Brisbane Laboratory

ISO/IEC 17025 (2017)

Infrastructure and Asset Integrity

Service Product Determinant Technique Procedure Limitations
Evaluation of mechanical performance of pressure equipment Piping; Pressure fittings; Pressure vessels; Valves Hydrostatic pressure Not applicable AS 1579 Appendix F,
AS 1631 section 9,
AS 2885.5 section 7.8 (Type 1),
AS 2885.5 section 7.9 (Type A),
AS 4037 section 17,
ASME B31.3 section 345.4		 Above ground and exposed pipe sections up to 40 MPa 
Leakage Not applicable AS 1210 Section 5.10,
AS 1228 Section 5.4,
AS 1579 Appendix F,
AS 1631 section 9,
AS 2885.5 section 7.8 (Type 1),
AS 2885.5 section 7.9 (Type A),
AS 4037 section 17,
ASME B31.3 section 345.4

 Above ground and exposed pipe sections up to 40 MPa
Leak evaluation of welds Metallic storage vessels Leakage Differential pressure box ASME V Article 10
Non-destructive testing (NDT) - Electromagnetic testing Castings - Cast irons, steel and alloy steels; Castings - Non-ferrous metals and alloys; Metallic tubes - Ferromagnetic materials; Metallic tubes - Non-ferromagnetic materials; Piping - Ferromagnetic materials; Piping - Non-ferromagnetic materials; Rolled or wrought aluminium products; Rolled or wrought steel products Conductivity Conductivity meter
Coatings Coating thickness High frequency eddy current
Metallic piping; Metallic plate Profiling Pulsed eddy current
Metallic surfaces Defect detection and characterisation High frequency eddy current
Non-destructive testing (NDT) - Magnetic particle testing Metallic surfaces - Magnetic Defect detection and characterisation AC magnetic flow
Non-destructive testing (NDT) - Penetrant testing Metallic surfaces Defect detection and characterisation Solvent removable; Water washable
Non-destructive testing (NDT) - Radiographic testing Castings - Cast irons, steel and alloy steels; Castings - Non-ferrous metals and alloys; Composite materials; Rolled or wrought aluminium products; Rolled or wrought non-ferrous materials; Rolled or wrought steel products; Welded joints - Aluminium alloys; Welded joints - Clad and overlaid steel; Welded joints - Copper and copper-nickel alloys; Welded joints - Ferritic materials; Welded joints - Stainless steel, austenitic and duplex materials; Welded joints - Titanium and titanium alloys Defect detection and characterisation Film radiography
Metallic piping; Metallic tubes - Ferromagnetic materials; Metallic tubes - Non-ferromagnetic materials Material profiling; Wall thickness Film radiography
Non-destructive testing (NDT) - Ultrasonic testing Castings - Cast irons, steel and alloy steels; Rolled or wrought steel products; Welded joints - Ferritic materials Defect detection and characterisation A-scan - Manual
Castings; Forgings; Metallic components; Metallic piping; Metallic plate; Metallic tubes - Ferromagnetic materials; Metallic tubes - Non-ferromagnetic materials Material thickness - Spot/grid only A-scan - Manual; Thickness meter
Material loss characterisation; Profiling A-scan - Manual
Non-destructive testing (NDT) - Visual testing - Prior to initial service Castings; Forgings; Rolled products; Welded joints Defect detection Visual testing

ISO/IEC 17025 (2017)

Manufactured Goods

Service Product Determinant Technique Procedure Limitations
Material performance evaluation of metal products Fixtures and components Tensile properties Longitudinal tensile; Transverse tensile

AS 1391, 

ASTM A370

1 kN to 1000 kN

Prepared metallic test specimens Compression Not applicable API 5L,
ASTM E9,
DNV.2 Chapter 1

5 kN to 1000 kN 

Prepared metallic test specimens; Welded test specimens Tensile properties All-weld-metal tensile; Longitudinal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse butt tensile; Transverse joggle-butt tensile; Transverse tensile AS 1391,
AS/NZS 1554.3,
AS 2205.2.1,
AS 2205.2.2,
AS 2205.2.3,
ASTM A370,
ASTM E8,
ASME IX QW 150,
DNV.2 Chapter 1,
ISO 4136,
ISO 5178,
ISO 6892-1,
ISO 9018

5 kN to 1000 kN

Hardness Brinell; Rockwell - Scale B; Rockwell - Scale C; Vickers AS 1815.1,
AS 1816.1,
AS 1817.1,
AS 2205.6.1,
ASME IX,
ASTM A370,
ASTM E10,
ASTM E18,
ISO 6507-1,
ISO 6508-1,
ISO 9015-1,
ISO 9015-2		 Vickers: HV5, HV10, HV30
Brinell: HB10
Impact resistance Charpy V-notch - Impact value AS 1544.2,
AS 2205.7.1,
API 5L,
DNV.2 Chapter 1,
ISO 9016		 from -80°C to 100°C and at -196°C
Bending properties Longitudinal guided bend; Transverse guided bend AS/NZS 1554.3,
AS 2505.1,
AS 2505.2,
AS/NZS 2205.3.1,
AS 2205.3.2,
AS 2205.3.3,
ASME Section IX,
ASTM A370,
AWS D1.1, D3.6 Section 7.10.3,
ISO 5173
Reinforcing bar and steel prestressing materials for concrete Bending properties; Geometric properties; Tensile properties Indentation geometry; Longitudinal guided bend; Longitudinal tensile; Rib geometry

AS/NZS 4671 (excluding mass per unit length),

ISO 15630-1 (excluding mass per unit length)

5 kN to 1000 kN

Tubing/piping Bending properties; Flattening properties; Shear strength Longitudinal guided bend; Transverse guided bend AS 1074,
AS 1163,
AS 2505.3,
ASTM A370,
ASTM A450
Welded test specimens Fracture test Visual examination AS/NZS 2205.4.1,
ASME Section IX,
AWS D1.1,
ISO 9017
Macroscopic examination Macroscopic examination AS 1554.3,
AS/NZS 2205.5.1,
ASME Section IX,
AWS D1.1,
ISO 17639 (2003)
Fracture test Visual examination AS/NZS 2205.4.1,
ASME Section IX,
AWS D1.1, D3.6 Section 7.10.6,
ISO 9017
Shear strength Longitudinal tensile AS 1554.3,
AS 2205.8.1,
AS 2205.8.2,
ASME Section IX QW 196.2.1,
ASTM A370,
AWS D1.1,
ISO 14323

ISO/IEC 17025 (2017)

Materials

Service Product Determinant Technique Procedure Limitations
Analysis of metals and alloys Chromium and chromium alloys; High alloy steels; Nickel and nickel alloys Comparative indication of material grade and alloy type Portable X-ray fluorescence equipment in-house method TP-CT-04 UNS# A13840, A95083, A96063, C36000, C62700, C71300, C83600, G41400, G43400, G86200, N06002, N09901, R30605, R30816, S17400, S30300, S30400, S31254, S31600, S31700, S32100, S32205, S32550, S43100, T20813

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.