National Measurement Institute (NMI)

Site

Measurement Standards Unit, Brisbane

Accreditation No.

1

Site No.

13207

Date of Accreditation

19 Nov 1997

Address

33 Kingtel Place
Geebung, QLD 4034
Australia

measurement.gov.au

Contact

Mr Rolf Grubwinkler P: +61 0457549074

Availability

Services conditionally available to external clients

National Measurement Institute (NMI) address map

Scope of Accreditation

Print scopes
Measurement Standards Unit, Brisbane

ISO/IEC 17025 (2017)

Calibration

  • The uncertainty of measurement is reported as an expanded uncertainty having a level of confidence of 95% unless stated otherwise
Service Product Determinant Technique Procedure Limitations
Dimensional metrology - Engineering equipment and precision instruments Electronic calipers; Vernier calipers Length measurements Comparison with a reference standard In-house method NTM 14.3.7

Capability

Including dial calipers
With Calibration and Measurement Capability of -
0.02 mm from 0 mm to 300 mm
Dimensional metrology - Engineering equipment and precision instruments Steel rulers and measuring tapes Length measurements Direct measurement against a reference standard BS 4372

Capability

Steel rules only

With Calibration and Measurement Capability of -

0.015 mm from 1 mm up to 1 m;

2 in 105 or 0.05 mm (whichever is greater) above 1 m up to 3 m
Dimensional metrology - Length and angle standards Precision graticules Length measurements Comparison with a reference standard

Capability

Glass scales up to 20 mm

With Calibration and Measurement Capability of-

4 μm from 0.1 mm up to 20 mm
Mass - Determination of mass and calibration of weighing devices Gaming accessories Mass Gravimetric measurement against reference mass

Capability

With Calibration and Measurement Capability of -

2 in 105 from 1 mg up to 5 000 kg
Mass - Determination of mass and calibration of weighing devices Industrial mass standards Mass Gravimetric measurement against reference mass

Capability

With Calibration and Measurement Capability of -

1 in 105 or 100 μg (whichever is greater) from 1 mg up to 5000 kg


on-site calibrations
3 in 105 from 100 g up to 2 kg
5 in 106 from 5 kg up to 10 kg
1 in 105 from above 10 kg up to 500 kg
5 in 105 from 500 kg up to 5 000 kg
Mass - Determination of mass and calibration of weighing devices Mass standards Mass Gravimetric measurement against reference mass

Capability

With Calibration and Measurement Capability of -

3 μg from 1 mg up to 10 mg;

5 μg above 10 mg up to 200 mg;

2 in 106 or 10 μg (whichever is greater) above 200 mg up to 20 g;

1 in 106 above 20 g up to 25 kg;

5 in 106 above 25 kg up to 1000 kg
Volume and density - Industrial volumetric equipment and bulk storage Bulk storage tanks; Industrial volumetric proving measures Volume Gravimetric

Capability

With Calibration and Measurement Capability of -

0.01% from 1 L up to 5000 L

On-site calibration of proving tanks by standard measures or by gravimetric methods
0.02% from 5 L up to 20L
0.015% from above 20 L up to 5 000 L
Volume and density - Industrial volumetric equipment and bulk storage Standard measures - > 25 L Volume Gravimetric

Capability

With Calibration and Measurement Capability of -
0.007% from 2 L up to 1000 L
Volume and density - Laboratory volumetric glassware and measures Standard measures - < 50 L; Volumetric glassware and measures Volume Gravimetric

Capability

With Calibration and Measurement Capability of -

0.002 mL at 1 mL;

1 in 104 or 0.004 mL (whichever is greater) above 1 mL up to 2 L

The only data displayed is that deemed relevant and necessary for the clear description of the Activities and Services covered by the Scope of Accreditation (SoA).

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.

The Product column may also describe an Item or Material.

The Limitations column may also describe the Range.