TUV Rheinland Australia Pty Limited

Site

Melbourne Laboratory

Accreditation No.

1700

Site No.

1142

Date of Accreditation

03 Dec 1975

Address

182 Dougharty Road
Heidelberg West, VIC 3081
Australia

tuv.com/australia/en

Contact

Mr Billy Chu P: +61 (03) 94501400

Availability

Services available to external clients

TUV Rheinland Australia Pty Limited address map

Scope of Accreditation

Print scopes
Melbourne Laboratory

ISO/IEC 17025 (2017)

Infrastructure and Asset Integrity

Service Product Determinant Technique Procedure Limitations
Evaluation of high voltage/power equipment and components - Performance Electricity grid and industrial power supply equipment and systems Arcing fault due to internal fault; Electrical endurance; Joule integral characteristics; Making and breaking capacities; Overload; Short circuit making and breaking capacities; Short time withstand and peak withstand current; Temperature rise Not applicable

AS/NZS 4235.1; 

AS 1284.1;

AS 60044.1 (excluding accuracy tests to clauses 11.4, 11.6, 12.4, 12.5 and 14.3 and interturn overvoltage testing to clause 8.4); 

IEC 61230; 

IEC 61439.1, AS/NZS 61439.1 (excluding arc fault test to IEC TR 61641);

AS/NZS 61439.2; IEC 61439-2;

Tests at currents up to 80 kA at 220 V, 63 kA at 440 V (+20/-15%) and 40 kA at 660 V;

Temperature rise tests for equipment up to a rated current of 7000A 

Switching control and protective equipment for power systems Arcing fault due to internal fault; Cut-off current characteristics; Dielectric dissipation; Electrical endurance; Joule integral characteristics; Making and breaking capacities; Overload; Short circuit making and breaking capacities; Short time withstand and peak withstand current; Temperature rise Not applicable

AS 3111; 

AS 60947.2;

IEC 60947-2;

AS/NZS IEC 60947.2

AS/NZS 3439.1;

IEC 60439-1; 

AS/NZS 3439.2;

IEC 60439-2; 

AS/NZS 60898.1;

IEC 60898-1;

AS/NZS 3190; 

AS/NZS 61008.1 and IEC 61008-1;  

AS/NZS 61009.1 and IEC 61009-1;

AS/NZS 3133 (endurance, temperature and motor control tests only); 

AS/NZS 3947.3;

IEC 60947-3; AS/NZS IEC 60947.3;
AS 60947.3 (Excluding Annex D);

AS 60269.1; AS 60269.2.0; AS 60269.2.1; AS 60269.3.0 and AS 60269.3.1

Dielectric tests to 5 kV, 50 Hz

ISO/IEC 17025 (2017)

Manufactured Goods

Service Product Determinant Technique Procedure Limitations
Electrical equipment approval and safety evaluation Audio, video and similar electronic equipment Electrical safety Dimensional assessment including creepage and clearance; Electrical characteristics; Endurance and resistance to external conditions; Energy measurement; Fire hazard assessment; Firmware assessment; Function assessment including abnormal operation; Insulation and electrical protection measurement; Mechanical assessment; Temperature; Visual examination

AS/NZS 60065 excluding clauses 6 and 12.1.2

Audio, video and similar electronic equipment; Ballasts and converters; Electrical appliances, coupling devices and accessories; Electrical machines and auxiliary apparatus; Electrical plugs, sockets, lead assemblies and related components; Information technology equipment; Lamps and lampholders (including LED-based lamps); Luminaires; Power adapters, low voltage power supply components, appliance transformers, power stabilisers and related items; Power tools - Electric; Switches - Low voltage switchgear and controls (excluding high current) Effect of environmental exposure on electrical equipment and enclosures Cold; Damp heat; Damp heat - Cyclic (12 + 12 hour cycle); Damp heat - Steady state; Dry heat; Dust; Heat shock; Solar radiation; Temperature; Vibration; Water absorption AS 60068.2.1;  60068.2.2; 60068.2.78;
IEC 60068-2-30;
IEC 60851-6
Ballasts and converters Electrical safety Dimensional assessment including creepage and clearance; Electrical characteristics; Endurance and resistance to external conditions; Energy measurement; Fire hazard assessment; Firmware assessment; Function assessment including abnormal operation; Insulation and electrical protection measurement; Mechanical assessment; Temperature; Visual examination

AS/NZS 5110;

AS/NZS 61347.1, IEC 61347-1, EN 61347-1;

AS/NZS 61347.2.1, IEC 61347-2-2, EN 61347-2-1;

AS/NZS 61347.2.2, IEC 61347-2-2, EN 61347-2-2;

AS/NZS 61347.2.3, IEC 61347-2-3, EN 61347-2-3;

AS/NZS 61347.2.4, IEC 61347-2-4, EN 61347-2-4;

AS/NZS 61347.2.5, IEC 61347-2-5, EN 61347-2-5;

AS/NZS 61347.2.6, IEC 61347-2-6, EN 61347-2-6;

AS/NZS 61347.2.7, IEC 61347-2-7, EN 61347-2-7;

AS/NZS 61347.2.8, IEC 61347-2-8, EN 61347-2-8;

AS/NZS 61347.2.9, IEC 61347-2-9, EN 61347-2-9;

AS/NZS 61347.2.10, IEC 61347-2-10, EN 61347-2-10;

AS/NZS 61347.2.11, IEC 61347-2-11, EN 61347-2-11;

AS/NZS 61347.2.13, IEC 61347-2-13, EN 61347-2-13;

Electrical appliances, coupling devices and accessories Electrical safety Dimensional assessment including creepage and clearance; Electrical characteristics; Endurance and resistance to external conditions; Energy measurement; Fire hazard assessment; Firmware assessment; Function assessment including abnormal operation; Insulation and electrical protection measurement; Mechanical assessment; Temperature; Visual examination

AS/NZS 3350.1;

AS/NZS 60320.1; AS/NZS 60320.2.1; AS/NZS 60320.2

IEC 60335-1 3rd edition; EN 60335-1 3rd edition; AS/NZS 60335.1; IEC 60335-1 4th edition; EN 60335-1 4th edition;

AS/NZS 60335.2.1, IEC 60335-2-1, EN 60335-2-1;

AS/NZS 60335.2.2, IEC 60335-2-2, EN 60335-2-2 (excluding clauses 21.101, 21.102 and 21.103);

AS/NZS 60335.2.3, IEC 60335-2-3, EN 60335-2-3;

AS/NZS 60335.2.4, IEC 60335-2-4, EN 60335-2-4;

AS/NZS 60335.2.5, IEC 60335-2-5, EN 60335-2-5;

AS/NZS 60335.2.6, IEC 60335-2-6, EN 60335-2-6 (excluding clauses 22.110, 22.111, 22.135, 22.136 and 32);

AS/NZS 60335.2.7, IEC 60335-2-7, EN 60335-2-7;

AS/NZS 60335.2.8, IEC 60335-2-8, EN 60335-2-8;

AS/NZS 60335.2.9, IEC 60335-2-9, EN 60335-2-9;

AS/NZS 60335.2.10, IEC 60335-2-10, EN 60335-2-10;

AS/NZS 60335.2.11, IEC 60335-2-11, EN 60335-2-11;

AS/NZS 60335.2.12, IEC 60335-2-12, EN 60335-2-12;

AS/NZS 60335.2.13, IEC 60335-2-13, EN 60335-2-13;

AS/NZS 60335.2.14, IEC 60335-2-14, EN 60335-2-14;

AS/NZS 60335.2.15, IEC 60335-2-15, EN 60335-2-15;

AS/NZS 60335.2.16, IEC 60335-2-16, EN 60335-2-16;

AS/NZS 60335.2.17, IEC 60335-2-17, EN 60335-2-17 (excluding clauses 21.104 and 21.110);

AS/NZS 60335.2.21, IEC 60335-2-21, EN 60335-2-21;

AS/NZS 60335.2.23, IEC 60335-2-23, EN 60335-2-23;

AS/NZS 60335.2.24, IEC 60335-2-24, EN 60335-2-24 (excluding clauses 22.7, 22.107, 22.108, 22.109 and annex CC);

AS/NZS 60335.2.25, IEC 60335-2-25, EN 60335-2-25 (excluding clause 32 - radiation test);

AS/NZS 60335.2.26, IEC 60335-2-26, EN 60335-2-26;

AS/NZS 60335.2.27, IEC 60335-2-27, EN 60335-2-27 (excluding clause 32 - radiation test);

AS/NZS 60335.2.28, IEC 60335-2-28, EN 60335-2-28;

AS/NZS 60335.2.29, IEC 60335-2-29, EN 60335-2-29;

AS/NZS 60335.2.30, IEC 60335-2-30, EN 60335-2-30;

AS/NZS 60335.2.31, IEC 60335-2-31, EN 60335-2-31;

AS/NZS 60335.2.32, IEC 60335-2-32, EN 60335-2-32;

AS/NZS 60335.2.34, IEC 60335-2-34, EN 60335-2-34 (excluding flammable refrigerant testing);

AS/NZS 60335.2.35, IEC 60335-2-35, EN 60335-2-35;

AS/NZS 60335.2.40, IEC 60335-2-40, EN 60335-2-40 (excluding flammable refrigerant testing);

AS/NZS 60335.2.41, IEC 60335-2-41, EN 60335-2-41;

AS/NZS 60335.2.43, IEC 60335-2-43, EN 60335-2-43;

AS/NZS 60335.2.44, IEC 60335-2-44, EN 60335-2-44;

AS/NZS 60335.2.45, IEC 60335-2-45, EN 60335-2-45;

AS/NZS 60335.2.51, IEC 60335-2-51, EN 60335-2-51;

AS/NZS 60335.2.52, IEC 60335-2-52, EN 60335-2-52;

AS/NZS 60335.2.53 (Limited to listed AS/NZS deviations testing);

AS/NZS 60335.2.54, IEC 60335-2.54, EN 60335-2-54;

AS/NZS 60335.2.55, IEC 60335-2-55, EN 60335-2-55 (excluding clause 32 - radiation test);

AS/NZS 60335.2.56, IEC 60335-2-56, EN 60335-2-56;

AS/NZS 60335.2.59, IEC 60335-2-59, EN 60335-2-59 (excluding clause 32 - radiation test);

AS/NZS 60335.2.60, IEC 60335-2-60, EN 60335-2-60;

AS/NZS 60335.2.61, IEC 60335-2-61, EN 60335-2-61;

AS/NZS 60335.2.65, IEC 60335-2-65, EN 60335-2-65 (excluding clause 32 - radiation test);

AS/NZS 60335.2.66, IEC 60335-2-66, EN 60335-2-66;

AS/NZS 60335.2.73, IEC 60335-2-73, EN 60335.2-73;

AS/NZS 60335.2.74, IEC 60335-2-74, EN 60335.2-74;

AS/NZS 60335.2.75, IEC 60335-2-75, EN 60335.2-75;

AS/NZS 60335.2.76, IEC 60335-2-76, EN 60335.2-76 (excluding clauses 19.101 and 22.108);

AS/NZS 60335.2.77, IEC 60335-2-77, EN 60335.2-77 (excluding clauses 20.103.3 and 21.101);

AS/NZS 60335.2.78, IEC 60335-2-78, EN 60335.2-78;

AS/NZS 60335.2.79, IEC 60335-2-79, EN 60335-2-79 (excluding clause 19.102);

AS/NZS 60335.2.80, IEC 60335-2-80, EN 60335-2-80;

AS/NZS 60335.2.81, IEC 60335-2-81, EN 60335-2-81;

AS/NZS 60335.2.82, IEC 60335-2-82, EN 60335-2-82;

AS/NZS 60335.2.83, IEC 60335-2-83, EN 60335-2-83;

AS/NZS 60335.2.84, IEC 60335-2-84, EN 60335-2-84;

AS/NZS 60335.2.85, IEC 60335-2-85, EN 60335-2-85;

AS/NZS 60335.2.86, IEC 60335-2-86, EN 60335-2-86;

AS/NZS 60335.2.87, IEC 60335-2-87, EN 60335-2-87 (excluding clause 31 - corrosion test);

AS/NZS 60335.2.88, IEC 60335-2-88, EN 60335-2-88;

AS/NZS 60335.2.89, IEC 60335-2-89, EN 60335-2-89;

AS/NZS 60335.2.90, IEC 60335-2-90, EN 60335-2-90 (excluding clause 32 - radiation test);

AS/NZS 60335.2.91, IEC 60335-2-91, EN 60335-2-91;

AS/NZS 60335.2.92, IEC 60335-2-92, EN 60335-2-92;

AS/NZS 60335.2.94, IEC 60335-2-94, EN 60335-2-94;

AS/NZS 60335.2.95, IEC 60335-2-95, EN 60335-2-95;

AS/NZS 60335.2.96, IEC 60335-2-96, EN 60335-2-96

AS/NZS 60335.2.97, IEC 60335-2-97, EN 60335-2-97
AS/NZS 60335.2.98, IEC 60335-2-98, EN 60335-2-98
AS/NZS 60335.2.100, IEC 60335-2-100, EN 60335-2-100
AS/NZS 60335.2.101, IEC 60335-2-101, EN 60335-2-101
AS/NZS 60335.2.102, IEC 60335-2-102, EN 60335-2-102
AS/NZS 60335.2.105, IEC 60335-2-105, EN 60335-2-105
Electrical safety Dimensional assessment including creepage and clearance; Electrical characteristics; Endurance and resistance to external conditions; Energy measurement; Fire hazard assessment; Firmware assessment; Function assessment including abnormal operation; Insulation and electrical protection measurement; Mechanical assessment; Temperature; Visual examination

AS/NZS 4695.112;

AS/NZS 4695.2.2;

AS/NZS 60695.2.10;

AS/NZS 60695.2.11;

AS/NZS 60695.2.12;

AS/NZS 60695.2.13;

AS/NZS 60695.10.2;

AS/NZS 60695.11.2;

AS/NZS 60695.11.3;

AS/NZS 60695.11.4;

AS/NZS 60695.11.5;

AS/NZS 60695.11.10;

AS/NZS 60695.11.20;

AS/NZS 60112;

and the IEC parent documents where applicable

Electrical cables, cords and conductors Electrical performance of electrical cables, cords and conductors Conductor resistance; Current; Dielectric; Electric field intensity; Electrical continuity; High voltage; Impulse voltage withstand; Insulation resistance; Load cycle; Partial discharge; Sequence impedance; Spark; Surface leakage; Tan ? measurement; Voltage; Volume resistivity

AS/NZS 5000.1; AS/NZS 5000.2; AS/NZS 5000.3; 

AS/NZS 1660.1; AS/NZS 1660.2.1; AS/NZS 1660.2.2; AS/NZS 1660.2.3; AS/NZS 1660.2.4; AS/NZS 1660.2.5; AS/NZS 1660.3; AS/NZS 1660.4; AS/NZS 1660.5.1; AS/NZS 1660.5.2;
AS/NZS 1660.5.5; AS/NZS 1660.5.6;
AS/NZS IEC 60332.1.1; AS/NZS IEC 60332.1.2;
AS/NZS IEC 60332.1.3;
AS/NZS 1802;

AS/NZS 3808; 

AS/NZS 4702;

AS/NZS 4325 clause 7 

AS/NZS 2053.1; AS/NZS 2053.2; AS/NZS 2053.3; AS/NZS 2053.4; AS/NZS 2053.5; AS/NZS 2053.6; AS/NZS 2053.7; AS/NZS 2053.8; 

and the IEC parent documents where applicable

IEC/EN 60227.1; IEC/EN 60227.2; IEC/EN 60227.3; IEC/EN 60227.4; IEC/EN 60227.5; 

IEC/EN 60245.1; IEC/EN 60245.2; AS/NZS 60245.4; 

IEC 61238-1;

AS/NZS IEC 60670.1; IEC 60670-1;

AS/NZS 61386.1; IEC/EN 61386-1; 

AS/NZS 61386.21; IEC/EN 61386-21; 

AS/NZS 61386.22; IEC/EN 61386-22; 

AS/NZS 61386.23; IEC/EN 61386-23; 

IEC/EN 61386-24; 

Electrical safety of electrical cables, cords and conductors Abrasion; Adhesion; Ageing; Bending; Carbon black content; Carbon black dispersion; Combustion propagation; Compatibility; Contaminants; Cutting; Density; Dimensions; Durability of markings; Exudiser of plasticiser; Flexing; Gas emission; Heat shock; Heating cycling; Hot set; Ignitability; Immersion; Impact; Mass; Melt flow index; Plating; Pressure testing; Resistance to environmental stress cracking; Shrinkage; Smoke density; Stripping; Temperature; Tensile strength; Transulescents; Vertical flame propagation; Voids; Water absorption; Wrapping

AS/NZS 5000.1; AS/NZS 5000.2; AS/NZS 5000.3;

AS/NZS 1660.1; AS/NZS 1660.2.1; AS/NZS 1660.2.2; AS/NZS 1660.2.3; AS/NZS 1660.2.4; AS/NZS 1660.2.5; AS/NZS 1660.3; AS/NZS 1660.4; AS/NZS 1660.5.1; AS/NZS 1660.5.2; AS/NZS 1660.5.5; AS/NZS 1660.5.6; 

AS/NZS IEC 60332.1.1; AS/NZS IEC 60332.1.2;
AS/NZS IEC 60332.1.3;
AS/NZS 1802;  

AS/NZS 3808; 

AS/NZS 4702; 

AS/NZS 4325 clause 7 

AS/NZS 2053.1; AS/NZS 2053.2; AS/NZS 2053.3; AS/NZS 2053.4; AS/NZS 2053.5; AS/NZS 2053.6; AS/NZS 2053.7; AS/NZS 2053.8; 

and the IEC parent documents where applicable

IEC/EN 60227-1; IEC/EN 60227-2; IEC/EN 60227-3; IEC/EN 60227-4; IEC/EN 60227-5; AS/NZS IEC 60227.5; 

IEC/EN 60245-1; IEC/EN 60245-2; AS/NZS 60245.4; 

IEC 61238-1;

AS/NZS IEC 60670.1; IEC 60670-1;

AS/NZS 61386.1; IEC/EN 61386-1; 

AS/NZS 61386.21; IEC/EN 61386-21; 

AS/NZS 61386.22; IEC/EN 61386-22; 

AS/NZS 61386.23; IEC/EN 61386-23; 

IEC/EN 61386-24; 

Electrical machines and auxiliary apparatus Electrical safety Dimensional assessment including creepage and clearance; Electrical characteristics; Endurance and resistance to external conditions; Energy measurement; Fire hazard assessment; Firmware assessment; Function assessment including abnormal operation; Insulation and electrical protection measurement; Mechanical assessment; Temperature; Visual examination

IEC/EN 60204-1;
AS/NZS 4024.1204;

Electrical plugs, sockets, lead assemblies and related components Electrical safety Dimensional assessment including creepage and clearance; Electrical characteristics; Endurance and resistance to external conditions; Energy measurement; Fire hazard assessment; Firmware assessment; Function assessment including abnormal operation; Mechanical assessment; Temperature; Visual examination

AS/NZS 3100; AS/NZS 3102; AS/NZS 3105; AS 3106; AS/NZS 3111; AS/NZS 3112; AS/NZS 3113; AS/NZS 3117; AS/NZS 3119; AS/NZS 3120; AS/NZS 3121; AS/NZS 3122; AS/NZS 3123; AS/NZS 3124; AS/NZS 3127; AS/NZS 3128; AS/NZS 3130; AS/NZS 3131; AS/NZS 3133; AS/NZS 3135; AS/NZS 3136; AS/NZS 3140; AS/NZS 3160; AS/NZS 3161; AS/NZS 3166; AS/NZS 3190; AS/NZS 3191; AS/NZS 3194; AS/NZS 3197; AS/NZS 3199;

BS 5733; BS 546; BS 1363.1; BS 1363.2; BS 1363.3; BS 1363.4

Enclosures for electrical equipment Degree of protection - IP rating Not applicable

AS 60529;
IEC 60529 (excluding IPX 9)

IEC 62262;

Information technology equipment Electrical safety Dimensional assessment including creepage and clearance; Electrical characteristics; Endurance and resistance to external conditions; Energy measurement; Fire hazard assessment; Firmware assessment; Function assessment including abnormal operation; Insulation and electrical protection measurement; Mechanical assessment; Temperature; Visual examination

AS/NZS 60950.1 excluding clauses 6 and 7

Electrical safety Endurance and resistance to external conditions; Energy measurement; Fire hazard assessment; Firmware assessment; Function assessment including abnormal operation; Insulation and electrical protection measurement; Mechanical assessment; Temperature; Visual examination AS/NZS 62368.1 (excluding clauses 8.5.5, 10.5, 10.6, G.9, G.15, M.7, M.8, Annex C, H and U)
Lamps and lampholders (including LED-based lamps) Electrical safety Dimensional assessment including creepage and clearance; Electrical characteristics; Endurance and resistance to external conditions; Energy measurement; Fire hazard assessment; Firmware assessment; Function assessment including abnormal operation; Insulation and electrical protection measurement; Mechanical assessment; Temperature; Visual examination

AS/NZS 61184, IEC 61184, EN 61184; 

AS/NZS 60238, IEC 60238, EN 60238;

AS/NZS 60968; 

AS/NZS 60155 

Luminaires Electrical safety Dimensional assessment including creepage and clearance; Electrical characteristics; Endurance and resistance to external conditions; Energy measurement; Fire hazard assessment; Firmware assessment; Function assessment including abnormal operation; Insulation and electrical protection measurement; Mechanical assessment; Temperature; Visual examination

AS/NZS 1158.6 (excluding clauses 5.3, 5.5 and 6.3); 

AS/NZS 2144 clauses 4.2, 4.3, 4.7, 5.1, 5.1.1, 5.1.2, 5.1.3, 5.1.3.1, 5.1.3.2, 5.1.4, 5.2.1.1, 5.2.1.2, 5.2.1.4, 5.2.1.4.1, 5.2.1.4.2, 5.2.1.4.3, 5.2.1.5, 5.2.1.7.1 and 5.2.1.7.2 only; 

AS/NZS 60598.1, IEC 60598-1, EN 60598-1;

AS/NZS 60598.2.1, IEC 60598-2-1, EN 60598-2-1;

AS/NZS 60598.2.2, IEC 60598-2-2, EN 60598-2-2;

AS/NZS 60598.2.3, IEC 60598-2-3, EN 60598-2-3;

AS/NZS 60598.2.4, IEC 60598-2-4, EN 60598-2-4;

AS/NZS 60598.2.5, IEC 60598-2-5, EN 60598-2-5;

AS/NZS 60598.2.6, IEC 60598-2-6, EN 60598-2-6;

AS/NZS 60598.2.7, IEC 60598-2-7, EN 60598-2-7;

AS/NZS 60598.2.8, IEC 60598-2-8, EN 60598-2-8;

AS/NZS 60598.2.10, IEC 60598-2-10, EN 60598-2-10;

AS/NZS 60598.2.17, IEC 60598-2-17, EN 60598-2-17;

AS/NZS 60598.2.18:1998, IEC 60598-2-18, EN 60598-2-18;

AS/NZS 60598.2.19, IEC 60598-2-19, EN 60598-2-19;

AS/NZS 60598.2.20, IEC 60598-2-20, EN 60598-2-20;

AS/NZS 60598.2.22, IEC 60598-2-22, EN 60598-2-22;

AS/NZS 60598.2.23, IEC 60598-2-23, EN 60598-2-23;

AS/NZS 60598.2.25, IEC 60598-2-25, EN 60598-2-25;

SA SNZ TS 1158.6
Power adapters, low voltage power supply components, appliance transformers, power stabilisers and related items Electrical safety Dimensional assessment including creepage and clearance; Electrical characteristics; Endurance and resistance to external conditions; Energy measurement; Fire hazard assessment; Firmware assessment; Function assessment including abnormal operation; Insulation and electrical protection measurement; Mechanical assessment; Temperature; Visual examination

AS/NZS 61558.1, IEC 61558-1, EN 61558-1; 

AS/NZS 61558.2.1, IEC 61558-2-1, EN 61558-2-1; 

AS/NZS 61558.2.2, IEC 61558-2-2, EN 61558-2-2; 

AS/NZS 61558.2.3, IEC 61558-2-3, EN 61558-2-3; 

AS/NZS 61558.2.4, IEC 61558-2-4, EN 61558-2-4; 

AS/NZS 61558.2.5, IEC 61558-2-5, EN 61558-2-5; 

AS/NZS 61558.2.6, IEC 61558-2-6, EN 61558-2-6; 

AS/NZS 61558.2.7, IEC 61558-2-7, EN 61558-2-7; 

AS/NZS 61558.2.8, IEC 61558-2-8, EN 61558-2-8; 

AS/NZS 61558.2.9, IEC 61558-2-9, EN 61558-2-9; 

AS/NZS 61558.2.12, IEC 61558-2-12, EN 61558-2-12; 

AS/NZS 61558.2.13, IEC 61558-2-13, EN 61558-2-13; 

AS/NZS 61558.2.15, IEC 61558-2-15, EN 61558-2-15; 

AS/NZS 61558.2.16, IEC 61558-2-16, EN 61558-2-16; 

AS/NZS 61558.2.17, IEC 61558-2-17, EN 61558-2-17; 

AS/NZS 61558.2.23, IEC 61558-2-23, EN 61558-2-23; 

AS 62040.1.1, IEC 62040-1;

IEC 62109.1, IEC 62109.2 

Power tools - Electric Electrical safety Dimensional assessment including creepage and clearance; Electrical characteristics; Endurance and resistance to external conditions; Energy measurement; Fire hazard assessment; Firmware assessment; Function assessment including abnormal operation; Insulation and electrical protection measurement; Mechanical assessment; Temperature; Visual examination

AS/NZS 60745.1, IEC 60745-1; 

AS/NZS 60745.2.1, IEC 60745-2-1; 

AS/NZS 60745.2.2, IEC 60745-2-2; 

AS/NZS 60745.2.3, IEC 60745-2-3; 

AS/NZS 60745.2.4, IEC 60745-2-4; 

AS/NZS 60745.2.5 , IEC 60745-2-5 (excluding clause 12); 

AS/NZS 60745.2.6, IEC 60745-2-6; 

AS/NZS 60745.2.7, IEC 60745-2-7; 

AS/NZS 60745.2.8, IEC 60745-2-8; 

AS/NZS 60745.2.9, IEC 60745-2-9; 

AS/NZS 60745.2.11, IEC 60745-2-11 (excluding clause 12); 

AS/NZS 60745.2.12, IEC 60745-2-12; 

AS/NZS 60745.2.14, IEC 60745-2-14; 

AS/NZS 60745.2.17, IEC 60745-2-17; 

AS/NZS 60745.2.18, IEC 60745-2-18; 

AS/NZS 60745.2.19, IEC 60745-2-19; 

AS/NZS 60745.2.20, IEC 60745-2-20; 

AS/NZS 60745.2.21, IEC 60745-2-21; 

AS/NZS 62841.1;
AS/NZS 62841.2.1;
AS/NZS 62841.2.2;
AS/NZS 62841.2.4;
AS/NZS 62841.2.5;
AS/NZS 62841.2.8;
AS/NZS 62841.2.9;
AS/NZS 62841.2.10;
AS/NZS 62841.2.11;
AS/NZS 62841.2.14;
AS/NZS 62841.2.17;
AS/NZS 62841.2.21;
AS/NZS 62841.3.1;
AS/NZS 62841.3.4;
AS/NZS 62841.3.6;
AS/NZS 62841.3.9;
AS/NZS 62841.3.10;
AS/NZS 62841.3.12;
AS/NZS 62841.3.13;
AS/NZS 62841.3.14;



Switches - Low voltage switchgear and controls (excluding high current) Electrical safety Dimensional assessment including creepage and clearance; Electrical characteristics; Endurance and resistance to external conditions; Energy measurement; Fire hazard assessment; Firmware assessment; Function assessment including abnormal operation; Insulation and electrical protection measurement; Mechanical assessment; Temperature; Visual examination

IEC/EN 60947-1; AS/NZS IEC 60947.1;

IEC/EN 60947-2; AS/NZS IEC 60947.2;

AS 3947-3; IEC/EN 60947-3; 

AS 3947.4.1; IEC/EN 60947-4-1;

AS 3947.4.2; IEC/EN 60947-4-2; 

AS 3947.4.3; IEC/EN 60947-4-3 

AS 3947.5.1; IEC/EN 60947-5-1

AS 3947.5.2; IEC/EN 60947-5-2 

AS 3947.5.3; IEC/EN 60947-5-3 

AS 3947.5.4; IEC/EN 60947-5-4 

AS 3947.5.5; IEC/EN 60947-5-5 

AS/NZS 61008.1; IEC/EN 61008-1;
AS/NZS 61009.1; IEC/EN 61009-1;
AS/NZS 60898.1; IEC/EN 60898-1;
AS/NZS 60669.1; IEC/EN 60669-1;
AS/NZS 60669.2.1; IEC/EN 60669-2-1;

AS 60669.2.2; IEC/EN 60669-2-2;

 AS 60669.2.3; IEC/EN 60669-2-3; 

AS/NZS 61535.1; 

AS 3439-1; AS 3439-3 

Evaluation of consumer and industrial lighting, optical systems and eyewear Emergency evacuation lighting and exit luminaires Temperature Not applicable

AS 2293.3 Appendix D1

Evaluation of electrical appliances and devices - Energy efficiency classification Ballasts and converters; External power supplies, stabilisers and related items Energy labelling and minimum energy performance standards (MEPS) evaluation Calculations for energy labelling; Evaluation of test results against stated performance criteria; Visual assessment of marking and other attributes against stated criteria

AS/NZS 4665.2

Evaluation of electrical appliances and devices - Performance External power supplies, stabilisers and related items Current; Power; Standby power; Voltage Not applicable

AS/NZS 4665.1 ;

AS/NZS 62301
Inverters and grid protection devices Power, voltage, current and impulse protection performance Not applicable

AS/NZS 4777.2;

Evaluation of telecommunication equipment compliance Customer cabling products (excluding cables and pits) Approval tests for the labelling notice of customer equipment and customer cabling

AS/CA S008 excluding clauses 5.6.5, 5.6.8, 5.6.15.2, 5.6.15.3, 5.6.15.4, 5.6.16, 5.6.17 and 5.7.3(a)

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.