SRG Global Asset Care Pty Ltd

Site

Melbourne NDT and Mechanical Testing Services

Accreditation No.

218

Site No.

507

Date of Accreditation

26 Feb 1965

Address

2/290 Salmon St
Port Melbourne, VIC 3207
Australia

srgglobal.com.au

Contact

Mr Ivan Lo P: +61 0409725015

Availability

Services available to external clients

SRG Global Asset Care Pty Ltd address map

Scope of Accreditation

Print scopes
Melbourne NDT and Mechanical Testing Services

ISO/IEC 17025 (2017)

Infrastructure and Asset Integrity

Service Product Determinant Technique Procedure Limitations
Evaluation of geotechnical and civil construction material - Concrete, grout and mortar properties Concrete, grout and mortar Mass per unit volume - Hardened concrete Dimensions AS 1012.12.1
Compressive strength Core; Cube; Cylinder AS 1012.9; AS 1012.14
Evaluation of geotechnical and civil construction material - Concrete, grout and mortar specimen manufacture and curing Concrete, grout and mortar Specimen conditioning; Specimen manufacture; Specimen manufacture and curing Curing cylinder specimens in the laboratory; Curing grout and mortar cube specimens in the laboratory; Dry conditioning of hardened concrete core specimens; Wet conditioning of hardened concrete core specimens AS 1012.8.1; AS 1012.8.3; AS 1012.14
Leak evaluation of welds Fibre reinforced plastic vessels; Metallic storage vessels; Pressure vessels Leakage Differential pressure box
Non-destructive testing (NDT) - Electromagnetic testing Coatings Coating thickness High frequency eddy current; Magnetic induction - Low frequency
Metallic surfaces Defect detection and characterisation High frequency eddy current; Low frequency eddy current
Metallic tubes - Ferromagnetic materials; Metallic tubes - Non-ferromagnetic materials Profiling Remote field eddy current (RFT)
Non-destructive testing (NDT) - Electromagnetic testing - Specialised - Magnetic flux leakage (MFL) Metallic plate Material loss Not applicable Above ground bulk storage tanks
Non-destructive testing (NDT) - Electromagnetic testing - Specialised - Rotational eddy current Metallic tubes - Ferromagnetic materials; Metallic tubes - Non-ferromagnetic materials Profiling Not applicable
Non-destructive testing (NDT) - Magnetic particle testing Metallic surfaces - Magnetic Defect detection and characterisation AC magnetic flow
Non-destructive testing (NDT) - Penetrant testing Metallic surfaces Defect detection and characterisation Solvent removable; Water washable
Non-destructive testing (NDT) - Radiographic testing Embedded items - Reinforcing Product geometry Film radiography
Metallic piping; Metallic tubes - Ferromagnetic materials; Metallic tubes - Non-ferromagnetic materials Material profiling; Material profiling - Low intensity/pulsed; Wall thickness Film radiography
Welded joints - Aluminium alloys; Welded joints - Clad and overlaid steel; Welded joints - Copper and copper-nickel alloys; Welded joints - Ferritic materials; Welded joints - Stainless steel, austenitic and duplex materials; Welded joints - Titanium and titanium alloys Defect detection and characterisation Film radiography
Non-destructive testing (NDT) - Radiographic testing - Specialised - Computed radiography Metallic piping; Metallic tubes - Ferromagnetic materials; Metallic tubes - Non-ferromagnetic materials Material profiling; Material profiling - Low intensity/pulsed; Wall thickness Not applicable
Welded joints - Aluminium alloys; Welded joints - Clad and overlaid steel; Welded joints - Copper and copper-nickel alloys; Welded joints - Ferritic materials; Welded joints - Stainless steel, austenitic and duplex materials; Welded joints - Titanium and titanium alloys Defect detection and characterisation Not applicable
Non-destructive testing (NDT) - Ultrasonic testing Bonded metals; Castings - Cast irons, steel and alloy steels; Castings - Non-ferrous metals and alloys; Rolled or wrought steel products; Welded joints - Ferritic materials; Welded joints - Stainless steel, austenitic and duplex materials Defect detection and characterisation A-scan - Manual
Metallic piping; Metallic plate Material loss characterisation; Profiling A-scan - Manual
Material thickness - Spot/grid only A-scan - Manual; Thickness meter
Metallic piping; Metallic plate; Metallic tubes - Non-ferromagnetic materials Material loss characterisation; Profiling A-scan - Mechanised
Non-destructive testing (NDT) - Ultrasonic testing - Specialised - Internal rotary (IRIS) Metallic piping; Metallic tubes - Non-ferromagnetic materials Material loss; Wall thickness Not applicable
Non-destructive testing (NDT) - Ultrasonic testing - Specialised - Phased array (PAUT) Bonded metals; Castings - Cast irons, steel and alloy steels; Castings - Non-ferrous metals and alloys; Welded joints - Ferritic materials Defect detection and characterisation Manual
Non-destructive testing (NDT) - Visual testing - Prior to initial service Welded joints Defect detection Visual testing Examination for Surface defects

ISO/IEC 17025 (2017)

Manufactured Goods

Service Product Determinant Technique Procedure Limitations
Material performance evaluation of adhesives and sealants Adhesives Adhesion Pull-off test

AS 1012.24, AS 1580.408.5, AS 3894.9

ASTM D4541, ASTM D7234, 

EN 1542
Material performance evaluation of elastomers, plastics and composite products Pipe material and related products Resistance to external blows Not applicable ISO 3127

 Including for the purpose of determining compliance with WSA 137 Section 3
Material performance evaluation of metal products Prepared metallic test specimens Hardness Rockwell

AS 1815.1, 

ASTM E18,

ISO 6508-1, 

JIS Z 2245

 Scales A, B and C
Hardness Vickers

AS 1817.1,

EN 23878, 

ISO 6507-1, 

JIS Z 2244

9.8 to 490 N

Including for the purpose of determining compliance with:
AS/NZS 1554.1, .2, .5; AS/NZS 3992
Hardness Brinell; Brinell - Portable tester

AS 1816.1,

ASTM E10; ASTM E110,

ISO 6506-1

9.8 to 294 N
Tests at 4.9, 7.35, 9.8 and 29.4 kN with a portable tester
Tests in the range 4.9 kN to 29.4 kN using a universal testing machine 
Welded test specimens Hardness Brinell; Rockwell; Vickers

AS 2205.6.1,

ISO 9015-1; ISO 9015-2

 Rockwell: Scales A, B and C
Including for the purpose of determining compliance with:
AS/NZS 1554.1, .2, .4, .5; AS/NZS 2885.2; AS/NZS 3992;
DNV Rules for classification of ships/high speed light craft and naval surface craft, Part 2, Chapter 3 Section 5;
Lloyds Rules for the manufacture, testing and certification of materials Chapter 12
Fracture test Macroscopic examination; Visual examination

AS/NZS 2205.4.1,

ASME IX; AWS B4, AWS D1.1, 

ISO 9017; ISO 9606-1; ISO 9606-2
Macroscopic examination Macroscopic examination

AS/NZS 2205.5.1, 

ASTM E381, 

ISO 17639


 Including for the purpose of determining compliance with
AS/NZS 1665; AS/NZS 2980; AS/NZS 1554.1, .3, .4, .5, .6;
ASME IX;
AWS D1.1 / D1.1M;
EN ISO 10042,
ISO 5817;
DNV Rules of classification of ships/high speed, light craft and naval surface craft Part 2 Chapter 3 Section 5;
Lloyds Rules for the manufacture, testing and certification of materials Chapter 12

ISO/IEC 17025 (2017)

Materials

Service Product Determinant Technique Procedure Limitations
Metallic corrosion evaluation Aluminium and aluminium alloys; Austenitic, duplex and nickel-chromium alloys; Chemical corrosion treatment materials; Copper and copper alloys; Ferrous materials; Plating Coating thickness Microscopic examination

AS 2331.1.1, 

AS/NZS 4792 Appendix F5,

ISO 1463
Austenitic, duplex and nickel-chromium alloys; Chemical corrosion treatment materials; Copper and copper alloys; Ferrous materials; Plating Coating thickness Dissolution - Strip, weigh and analytical

AS 1897 Section 10, AS 2331.2.1, 

AS/NZS 4534 Appendix E2; AS/NZS 4680 Appendix G2, AS/NZS 4792 Appendix F2, 

ASTM B767,

ISO 1460; ISO 10111
Copper and copper alloys Dezincification resistance Not applicable

AS 2345, 

ISO 6509-1
Ferrous materials Intergranular corrosion resistance Acidified copper sulfate exposure - Mony-Penny-Strauss; Copper-copper sulfate-sulfuric acid; Nitric acid exposure - Huey

AS 2038,

ASTM A262 Method E, 

ISO 3651-2
Pitting corrosion resistance Ferric chloride pitting

ASTM A1084, ASTM G48 Practice A
Metallographic evaluation of metals and alloys Aluminium and aluminium alloys Anodising thickness Microscopic examination

AS 2331.1.1, 

ASTM B487, 

ISO 1463
Aluminium and aluminium alloys; Austenitic, duplex and nickel-chromium alloys; Copper and copper alloys; Magnesium alloys; Nickel and nickel alloys; Titanium and titanium alloys Grain size Microscopic examination

AS 1733, 

ASTM E112
Austenitic, duplex and nickel-chromium alloys; Ferrous materials Ferrite count; Phase identification and proportion Microscopic examination; Point count

ASTM A923 Method C, ASTM E562, 

ISO 9042

 Stainless steels, austentitic and duplex steel and welds
Austenitic, duplex and nickel-chromium alloys; Ferrous materials; Magnesium alloys; Nickel and nickel alloys; Titanium and titanium alloys Depth of surface defects Microscopic examination

AS 4291.1
Ferrous materials Grain size Microscopic examination

AS 1733, 

ASTM E112, ASTM E1181

ISO 643
Case depth and depth of decarburisation Hardness traverse; Macroscopic examination; Microhardness; Microscopic examination

AS 4291.1, 

ASTM E1077.

ISO 3887
Graphite type and distribution in cast irons Microscopic examination

AS 1830, AS 1831, 

ASTM A247, 

ISO 945-1
Non-metallic inclusion content Macroscopic examination; Microscopic examination

AS 2087, AS 2197, 

ASTM E45,

ISO 4967

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.