Metlogic Pty Ltd

Metlogic

Site

Metlogic Laboratory

Metlogic

Accreditation No.

20741

Site No.

24894

Date of Accreditation

07 Aug 2020

Address

33 John Radley Avenue
Dural, NSW 2158
Australia

metlogic.com.au

Contact

Mr Prabath Kamalasena P: +61 (02) 80045122

Availability

Services available to external clients

Scope of Accreditation

Metlogic Laboratory

ISO/IEC 17025 (2017)

Calibration

Service Product Determinant Technique Procedure Limitations
DC and low frequency electrical metrology - Electrical measurement and test equipment Electricity meters Active energy; Reactive energy Comparison with a reference standard Accuracy requirement of single and polyphase electricity meters by the methods of - AS 1284.1, AS 1284.13, AS 62053.21, AS 62053.22, AS 62053.23, NITP 14 National Instrument Test Procedures for Utility Meters and NMI M 6-1 Active Energy Electricity Meters. Part 1: Metrological and Technical Requirements.
Functional tests for no load and starting current by the methods of the above standards.

Capability

Watt-hour meters at 50 Hz across power factors 1.0 to 0.5 leading and lagging current
with Calibration and Measurement Capability of -
600 µWh/VAh for currents from 10 mA to 50 mA and voltages from 63.5 V AC to 300 V AC
400 µWh/VAh for currents from 50 mA to 100 A and voltages from 63.5 V AC to 300 V AC

Var-hour meters at 50 Hz across power factors 1.0 to 0.5 leading and lagging current
with Calibration and Measurement Capability of -
400 µvarh/VAh for currents from 100 mA to 5 A from 63.5 V AC to 240 V AC
700 µvarh/VAh for currents from 5 A to 20 A from 63.5 V AC to 240 V AC

Functional tests for no load and starting current.

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.