Home / New South Wales Laboratory

Trescal (Australia) Pty Ltd

Site

New South Wales Laboratory

Accreditation No.

19397

Site No.

22182

Date of Accreditation

22 Jan 2014

Address

Unit 1, 6 Anella Avenue
Castle Hill, NSW 2154
Australia

trescal.com.au

Contact

Mr Anthony Wynn P: +61 0476850542

Availability

Services available to external clients

Scope of Accreditation

Print scopes

New South Wales Laboratory

ISO/IEC 17025 (2017)

Calibration

The uncertainty of measurement is reported as an expanded uncertainty having a level of confidence of 95% unless stated otherwise

Service	Product	Determinant	Technique	Procedure	Limitations
DC and low frequency electrical metrology - Electrical instrument calibrators	Instrument calibrators	Resistance	Direct measurement against a reference standard		0 Ω to 100 MΩ
Capability with Calibration and Measurement Capability of - 57 μΩ/Ω + 50 μΩ up to 1.9 Ω 34 μΩ/Ω from 1.9 Ω to 10 Ω 50 μΩ/Ω from 10 Ω to 100 Ω 20 μΩ/Ω from 100 Ω to 100 kΩ 31 μΩ/Ω from 100 kΩ to 1 MΩ 100 μ Ω/Ω from 1 MΩ to 10 MΩ 840 μΩ/Ω from 10 MΩ to 100 MΩ
		AC voltage; DC voltage	Direct measurement against a reference standard		D.C. voltage From 0 mV to 1000 V A.C. voltage From 10 mV to 700 V at 10 Hz to 1 MHz
Capability with Calibration and Measurement Capability of - D.C. voltage 14 μV/V + 0.3 μV up to 100 mV 8 μV/V from 100 mV to 1 V 7 μV/V from 1 V to 10 V 11 μV/V from 10 V to 100 V 22 μV/V from 100 V to 1000 V A.C. voltage 0.04% from 10 mV to 100 mV and 10 Hz to 1 kHz 0.12% from 10 mV to 100 mV and 1 kHz to 100 kHz 1.2% from 10 mV to 100 mV and 100 kHz to 1 MHz 0.04% from 100 mV to 1 V and 10 Hz to 1 kHz 0.10% from 100 mV to 1 V and 1 kHz to 100 kHz 1.2% from 100 mV to 1 V and 100 kHz to 1 MHz 0.04% from 1 V to 10 V and 10 Hz to 1 kHz 0.10% from 1 V to 10 V and 1 kHz to 100 kHz 1.2% from 1 V to 10 V and 100 kHz to 1 MHz 0.05% from 10 V to 100 V and 10 Hz to 40 Hz 0.04% from 10 V to 100 V and 40 Hz to 1 kHz 0.14% from 10 V to 100 V and 1 kHz to 100 kHz 0.05% from 100 V to 700 V and 40 Hz to 1 kHz 0.08% from 100 V to 700 V and 1 kHz to 20 kHz
		AC current; DC current	Direct measurement against a reference standard		D.C. current From 0 nA to 20 A A.C.current From 10 μA to 10 A at 1 kHz From 10 A to 20 A at 50 Hz to 5 kHz
Capability with Calibration and Measurement Capability of - D.C. current 770 μA/A + 5 pA up to 100 nA 580 μA/A from 100 nA to 1 μA 570 μA/A from 1 μA to 100 μA 37 μA/A from 100 μA to 10 mA 55 μA/A from 10 mA to 100 mA 150 μA/A from 100 mA to 1 A 0.2% from 1 A to 10 A 0.34% from 10 A to 20 A A.C. current 0.13% from 10 μA to 100 μA at 1 kHz 0.07% from 100 μA to 100 mA at 1 kHz 0.15% from 100 mA to 1 A at 1 kHz 0.23% from 1 A to 10 A at 1 kHz 0.35% from 10 A to 20 A at 50 Hz to 5 kHz
DC and low frequency electrical metrology - Electrical measurement and test equipment	Ammeters; Digital multimeters (DMM)	AC current; DC current	Direct measurement against a reference standard		D.C. current From 0 μA to 1500 A A.C.current From 20 μA to 10 A at 10 Hz to 10 kHz From 10 A to 20 A at 40 Hz to 1 kHz From 20 A to 1500 A at 56 Hz
Capability with Calibration and Measurement Capability of - D.C. current 0.02% + 10 nA up to 220 μA 0.01% from 220 μA to 22 mA 0.02% from 22 mA to 2.2 A 0.05% from 2.2 A to 20 A 0.77% from 20 A to 60 A (Multi Turn Method) 0.74% from 60 A to 300 A (Multi Turn Method) 0.58% from 300 A to 1500 A (Multi Turn Method) A.C. current 0.04% from 20 μA to 220 μA and 10 Hz to 1 kHz 0.11% from 20 μA to 220 μA and 1 kHz to 5 kHz 0.28% from 20 μA to 220 μA and 5 kHz to 10 kHz 0.03% from 220 μA to 2.2 mA and 40 Hz to 1 kHz 0.11% from 220 μA to 2.2 mA and 1 kHz to 5 kHz 0.28% from 220 μA to 2.2 mA and 5 kHz to 10 kHz 0.05% from 2.2 mA to 22 mA and 40 Hz to 1 kHz 0.11% from 2.2 mA to 22 mA and 1 kHz to 5 kHz 0.28% from 2.2 mA to 22 mA and 5 kHz to 10 kHz 0.03% from 22 mA to 220 mA and 40 Hz to 1 kHz 0.11% from 22 mA to 220 mA and 1 kHz to 5 kHz 0.28% from 22 mA to 220 mA and 5 kHz to 10 kHz 0.09% from 220 mA to 2.2 A and 40 Hz to 1 kHz 0.11% from 220 mA to 2.2 A and 1 kHz to 5 kHz 1.2% from 220 mA to 2.2 A and 5 kHz to 10 kHz 0.06% from 2.2 A to 10 A and 10 Hz to 1 kHz 0.12% from 2.2 A to 10 A and 1 kHz to 10 kHz 0.26% from 10 A to 20 A and 40 Hz to 44 Hz 0.09% from 10 A to 20 A and 45 Hz to 99 Hz 0.37% from 10 A to 20 A and 100 Hz to 1 kHz 0.77% from 20 A to 60 A and 40 Hz to 60 Hz (Multi Turn Method) 0.74% from 60 A to 300 A and 40 Hz to 60 Hz (Multi Turn Method) 0.58% from 300 A to 1500 A and 40 Hz to 60 Hz (Multi Turn Method)
	Digital multimeters (DMM); Ohm meters	Resistance	Direct measurement against a reference standard		From 0 Ω to 1 GΩ
Capability with Calibration and Measurement Capability of - 0.013% + 50 μΩ up to 1 Ω 0.004% from 1 Ω to 10 Ω 0.003% from 10 Ω to 100 Ω 0.002% from 100 Ω to 100 kΩ 0.003% from 100 kΩ to 1 MΩ 0.009% from 1 MΩ to 10 MΩ 0.03% from 10 MΩ to 100 MΩ 3.5% from 100 MΩ to 1 GΩ
	Digital multimeters (DMM); Voltmeters	AC voltage; DC voltage	Direct measurement against a reference standard		D.C. voltage From 0 mV to 1000 V From 2000 V to 10000 V A.C. voltage From 1 mV to 1000V at 10 Hz to 1 MHz From 2000 V at 5000 V at 50 Hz
Capability with Calibration and Measurement Capability of - D.C. voltage 21 μV/V + 0.8 μV up to 220 mV 11 μV/V from 220 mV to 2.2 V 10 μV/V from 2.2 V to 11 V 11 μV/V from 11 V to 22 V 12 μV/V from 22 V to 220 V 15 μV/V from 220 V to 1000 V 0.63% from 2000 V to 10000 V A.C. voltage 0.31% from 1 mV to 2.2 mV and 40 Hz to 20 kHz 0.11% from 2.2 mV to 22 mV and 10 Hz to 20 Hz 0.07% from 2.2 mV to 22 mV and 20 Hz to 40 Hz 0.06% from 2.2 mV to 22 mV and 40 Hz to 20 kHz 0.10% from 2.2 mV to 22 mV and 20 kHz to 50 kHz 0.22% from 2.2 mV to 22 mV and 50 kHz to 100 kHz 0.56% from 2.2 mV to 22 mV and 100 kHz to 300 kHz 0.63% from 2.2 mV to 22 mV and 300 kHz to 500 kHz 0.77% from 2.2 mV to 22 mV and 500 kHz to 1 MHz 0.09% from 22 mV to 220 mV and 10 Hz to 20 Hz 0.04% from 22 mV to 220 mV and 20 Hz to 40 Hz 0.03% from 22 mV to 220 mV and 40 Hz to 20 kHz 0.07% from 22 mV to 220 mV and 20 kHz to 50 kHz 0.20% from 22 mV to 220 mV and 50 kHz to 100 kHz 0.52% from 22 mV to 220 mV and 100 kHz to 300 kHz 0.55% from 22 mV to 220 mV and 300 kHz to 500 kHz 0.69% from 22 mV to 220 mV and 500 kHz to 1 MHz 0.08% from 220 mV to 2.2V and 10 Hz to 20 Hz 0.03% from 220 mV to 2.2V and 20 Hz to 40 Hz 0.02% from 220 mV to 2.2V and 40 Hz to 20 kHz 0.05% from 220 mV to 2.2V and 20 kHz to 50 kHz 0.16% from 220 mV to 2.2V and 50 kHz to 100 kHz 0.50% from 220 mV to 2.2V and 100 kHz to 500 kHz 0.60% from 220 mV to 2.2V and 500 kHz to 1 MHz 0.09% from 2.2 V to 22 V and 10 Hz to 20 Hz 0.03% from 2.2 V to 22 V and 20 Hz to 20 kHz 0.07% from 2.2 V to 22 V and 20 kHz to 50 kHz 0.21% from 2.2 V to 22 V and 50 kHz to 100 kHz 0.75% from 2.2 V to 22 V and 100 kHz to 300 kHz 0.77% from 2.2 V to 22 V and 300 kHz to 500 kHz 0.09% from 22 V to 220 V and 10 Hz to 20 Hz 0.04% from 22 V to 220 V and 20 Hz to 40 Hz 0.07% from 22 V to 220 V and 40 Hz to 20 kHz 0.16% from 22 V to 220 V and 20 kHz to 50 kHz 0.17% from 22 V to 220 V and 50 kHz to 100 kHz 0.04% from 220 V to 750 V and 40 Hz to 10 kHz 0.31% from 220 V to 750 V and 10 kHz to 100 kHz 0.04% from 750 V to 1000 V and 40 Hz to 1 kHz 0.07% from 750 V to 1000 V and 1 kHz to 20 kHz 0.71% from 2000 V to 5000 V at 50 Hz
	Insulation resistance test equipment	Resistance	Direct measurement against a reference standard
Capability with Calibration and Measurement Capability of - 0.3% of reading from 10 kΩ to 39.99 kΩ up to 55 Vdc 0.3% of reading from 40 kΩ to 99.99 kΩ up to 400 Vdc 0.4% of reading from 100 kΩ to 199.99 kΩ up to 800 Vdc 0.6% of reading from 200 kΩ to 999.99 kΩ up to 1000 Vdc 0.7% of reading from 1 MΩ to 1.999 MΩ up to 1000 Vdc 0.8% of reading from 2 MΩ to 9.999 MΩ up to 1000 Vdc 1.2% of reading from 10 MΩ to 199.9 MΩ up to 1000 Vdc 1.3% of reading from 200 MΩ to 999.9 MΩ up to 1000 Vdc 1.8% of reading at 1 GΩ up to 1000 Vdc 1.9% of reading at 1 GΩ using Multiplier up to 1000 Vdc
	LCR meters	Capacitance; Inductance; Resistance	Comparison with a reference standard by substitution measurement		Two terminal capacitors 0.7 μF to 100 μF at 100 Hz 0.4 nF to 300 nF at 1 kHz DC Resistance and Inductance 0.1 mH to 100 mH at 1kHz 0 Ω to 1 GΩ
Capability with Calibration and Measurement Capability of - Two terminal capacitors 0.70% from 0.7 μF to 1.2 μF at 100 Hz 0.52% from 1.2 μF to 10.9 μF at 100 Hz 0.92% from 10.9 μF to 33 μF at 100 Hz 0.70% from 33 μF to 100 μF at 100Hz 0.69% from 0.35 nF to 1.5 nF at 1 kHz 1.3% from 1.5 nF to 25 nF at 1 kHz 0.41% from 25 nF to 100 nF at 1 kHz 0.42% from 100 nF to 300 nF at 1 kHz DC Resistance and Inductance 0.06% from 0.1 to 100 mH at 1 kHz 0.013% + 50 μΩ up to 1 Ω 0.004% from 1 Ω to 10 Ω 0.003% from 10 Ω to 100 Ω 0.002% from 100 Ω to 100 kΩ 0.003% from 100 kΩ to 1 MΩ 0.009% from 1 MΩ to 10 MΩ 0.03% from 10 MΩ to 100 MΩ 3.5% from 100 MΩ to 1 GΩ
DC and low frequency electrical metrology - Electrical standards	Inductors	Inductance	Comparison with a reference standard		0.1 mH to 100 mH at 1kHz
Capability with Calibration and Measurement Capability of - 0.06% from 0.1 to 100 mH at 1kHz
	Precision capacitors	Capacitance	Comparison with a reference standard		Two terminal capacitors at 1 kHz 10 pF to 1000 nF
Capability with Calibration and Measurement Capability of - 0.11% from 10 pF to 100 pF at 1 kHz 0.06% from 101 pF to 1000 nF at 1 kHz
Dimensional metrology - Engineering equipment and precision instruments	Depth and height micrometers	Length measurements	Comparison with a reference standard	Precision vernier height gauges including compliance to BS 1643 Depth micrometers including compliance to BS 6468
Capability with Calibration and Measurement Capability of - 2 μm from 1 to 125 mm (1.3 +L/180) μm above 125 to 600 mm where L is the indicated depth in mm
	Dial gauges	Length measurements	Comparison with a reference standard	Including compliance to AS 2103:1978 and BS 907
Capability with Calibration and Measurement Capability of - Dial Gauges (0.8 + 0.013L) μm where L is the range in mm from 1 mm to 100 mm Dial Test Indicators (0.8 + 100R) μm where R is the resolution in mm up to a travel of 1.5mm
	Electronic calipers; Vernier calipers	Length measurements	Comparison with a reference standard	including compliance to BS 887 and JIS 7507:2016
Capability with Calibration and Measurement Capability of - (10 + 0.025L) μm for indication errors up to 600mm up to 1.5m (2.8 + 0.042L) μm above 600 to 1500mm where L is the scale value in mm
	Extensometers	Length measurements	Comparison with a reference standard	Including compliance to AS 1545
Capability with Calibration and Measurement Capability of - (1 + 0.5 L) μm from 0.01 mm to 250 mm where L is the extension in mm
	External micrometers	Length measurements	Comparison with a reference standard	Up to 1 m including compliance to AS 2102 and BS 870
Capability with Calibration and Measurement Capability of - 1.8 µm up to 25 mm 2.6 µm above 25 mm to 100 mm (1.8+0.01L) µm above 100 mm to 1000mm where L = length in mm
	Feeler gauges	Length measurements	Comparison with a reference standard	Including compliance to AS 1655
Capability with Calibration and Measurement Capability of - 1.8 µm from 0.04 mm to 5 mm
	Internal micrometers	Length measurements	Comparison with a reference standard	Up to 1 m including compliance to AS 2101 and BS 959
Capability with Calibration and Measurement Capability of - 2.5 μm from 25 mm to 150 mm 4 μm above 150 mm to 300 mm (1.6 + 0.008L) μm above 300 mm to 1000 mm where L is the length in mm
	Micrometer heads	Length measurements	Comparison with a reference standard	Including compliance to AS 2328 and BS 1734
Capability with Calibration and Measurement Capability of - (0.4+0.6R) μm where R is the resolution in μm
	Micrometer setting gauges	Length measurements	Comparison with a reference standard
Capability with Calibration and Measurement Capability of - 1 in 10⁵ or 1 μm (whichever is greater) up to 1 000 mm
	Precision spirit levels	Length measurements	Comparison with a reference standard	Including compliance to AS 2054
Capability with Calibration and Measurement Capability of - 2 sec of arc (limited to levels with 10 second divisions)
	Squares	Length measurements	Comparison with a reference standard	Engineers squares, grades A and B, up to 1 m including compliance to BS 939
Capability with Calibration and Measurement Capability of - 2.0 μm from 100 mm to 150 mm 2.4 μm above 150 mm to 200 mm 2.8 μm above 200 mm to 400 mm
	Steel rulers and measuring tapes	Length measurements	Comparison with a reference standard	Steel rules including compliance to BS 4372
Capability with Calibration and Measurement Capability of - 5.4 μm or (3.5+0.007L) μm (whichever is greater) from 0 to 2000mm where L is the ruler length in mm
	Straight edges	Length measurements	Comparison with a reference standard	Including compliance to AS 1003
Capability with Calibration and Measurement Capability of - 2μm from 50 mm up to 300 mm 3μm above 300 mm up to 500 mm 5 μm above 500 mm up to 1000 mm 8 μm above 1000 mm up to 1500 mm
	Surface plates	Length measurements	Comparison with a reference standard
Capability with Calibration and Measurement Capability of - (3.6 L + 2) μm where L is length of longest side of the surface/table
	Vernier height and depth gauges	Length measurements	Comparison with a reference standard	Precision vernier height gauges including compliance to BS 1643
Capability with Calibration and Measurement Capability of - 2.4 μm from 10 mm to 200mm ( 0.012*L) μm above 200 mm to 1000 mm L = Displacement in mm
Dimensional metrology - Jigs, fixtures, cutting tools, machine tools, gears, splines and serrations	Components and QC standards	Length measurements	Comparison with a reference standard by differential measurement
Capability with Calibration and Measurement Capability of - Linear measurements 5 in 10⁵ or 5 μm (whichever is greater) up to 1 000 mm
Dimensional metrology - Length and angle standards	Extensometer calibrators	Length measurements	Comparison with a reference standard	including compliance to AS 1545 and AS 2328
Capability with Calibration and Measurement Capability of - (0.51+ 0.5R) µm where R=res in µm
	Gauge blocks and accessories	Length measurements	Comparison with a reference standard	including compliance to AS 1457, Grades 1 and 2 for metric blocks and BS 4311 Grade 2 only for imperial blocks
Capability with Calibration and Measurement Capability of - (0.1um + l/1000) from 0.5mm to 100mm where L = Gauge Block Length in mm
Dimensional metrology - Limit gauges and reference standards	Plain ring gauges	Length measurements	Comparison with a reference standard
Capability with Calibration and Measurement Capability of - 1 µm from 2 mm to 50 mm. 3 µm above 50 mm to 150 mm
	Radius gauges	Radius	Comparison with a reference standard
Capability with Calibration and Measurement Capability of - 0.02 mm from 0.4 mm to 9 mm 0.03 mm above 9 mm to 20 mm 0.035 mm above 20 mm to 25 mm
Force metrology - Force measuring and testing equipmentincluding on site calibrations	Compression and universal machines in compression; Elastic force measuring devices; Hydraulic rams and jacks; Load cells; Load measuring rings; Tension and universal machines in tension	Force in compression; Force in tension	Comparison measurement with reference load cell	including compliance with AS 2193; ISO 7500; ASTM E4
Capability Laboratory up to 500 kN in tension and 2000 kN in compression Including on site calibrations up to 3000 kN in tension and 10000 kN in compression with a Calibration and Measurement Capability of - Tension and universal machines in tension Calibration at forces up to 500 kN to Class AA and 3 MN to Class A requirements to AS 2193 0.17% of reading from 0.01N to 500 kN 0.25% of reading from 500 kN to 3 MN Compression and universal machines in compression Calibration at forces up to 500 kN to Class AA, 4.5 MN to Class A and Class B above 4.5 MN to 10 MN requirements of AS 2193 0.17% of reading from 0.01N to 500 kN 0.25% of reading from 500 kN to 10 MN
	Elastic force measuring devices	Force in compression; Force in tension	Comparison measurement with reference load cell	Calibration of devices such as load measuring rings for soil testing machines in tension and compression at forces up to 500 kN to Class AA and 3.3 MN to Class A requirements of AS 2193	500 kN to Class AA and 3.3 MN to Class A requirements of AS 2193
Force metrology - Hardness standards and equipment	Hardness standards	Rubber hardness	Comparison with a reference standard	Rubber hardness tests (I.R.H.D.) on rubber products including liquid limit device bases including compliance to AS 1683.15.1 and similar specifications
Capability with a Calibration and Measurement Capability of: 1.5 hardness degree from 10 hardness degree to 95 hardness degree
Force metrology - Hardness standards and equipmentincluding on site calibrations	Brinell hardness machines	Brinell hardness	Comparison with a reference standard	Partial and complete calibration including compliance to AS 1816 and AS 2025
Capability Including on site calibrations from 39.2 N to 29.4 kN with a Calibration and Measurement Capability of 0.8 % HB for indirect measurement 0.17 % for force measurements
	Charpy impact machines	Charpy impact	Comparison with a reference standard	Partial and complete calibration including compliance to AS 1544
Capability Including on site calibrations with a Calibration and Measurement Capability of 0.2% of reading from 0.5 J to 750 J
	Dead weight rubber hardness testers	Rubber hardness	Comparison with a reference standard; Direct force and length measurement	Including compliance to AS 1683.15.1
Capability with a Calibration and Measurement Capability of 0.3 hardness degree from 0 to 100 hardness degree
	Indenters; Portable Brinell measuring microscopes	Length measurements	Direct length measurement	Indenters for hardness machines Visual examination
Capability Including on site calibrations with a Calibration and Measurement Capability of 0.006mm Portable Brinell measuring microscopes with minimum scale intervals of 0.05 mm
	Izod impact machines	Izod impact	Comparison with a reference standard	Partial and complete calibration including compliance to AS 1544
Capability Including on site calibrations with a Calibration and Measurement Capability of 0.2% reading from 2 J to 170 J
	Resilience testing machines	Resilience	Comparison with a reference standard	Calibration of rebound pendulum to DIN 53512 and similar specifications
Capability Including on site calibrations with a Calibration and Measurement Capability of 0.2% up to 0.5 J
	Rockwell hardness machines; Rockwell superficial hardness machines	Rockwell hardness	Comparison with a reference standard	Partial and complete calibration, except indenter dimensions and measuring apparatus, including compliance to AS 1815 and AS 2025
Capability including on site calibrations with a Calibration and Measurement Capability of starting at 0.4 Rockwell units for indirect verification 0.17% for force measurements
	Rockwell superficial hardness machines	Rockwell hardness	Comparison with a reference standard	Partial and complete calibration except depth measuring device including compliance to AS 2025
	Rubber hardness meters (durometers)	Rubber hardness	Comparison with a reference standard	Including compliance to AS 1683.15.2 and similar specifications
Capability with a Calibration and Measurement Capability of 0.4 hardness degree from 0 to 100 hardness degree
	Vickers hardness machines	Vickers hardness	Comparison with a reference standard	Partial and complete calibration, except indenter dimensions, including compliance to AS 1817	from 24.5 to 980 N
	Vickers hardness machines; Vickers low-load hardness machines; Vickers micro-hardness machines	Vickers hardness	Comparison with a reference standard	Direct verification except indenter dimensions including compliance to AS 1817
Capability Including on site calibrations with a Calibration and Measurement Capability starting at 1% HV for indirect verification 0.17% for force measurements Vickers micro-hardness machines (less than HV 0.2) Vickers low-load hardness machines (HV 0.2 to HV 5 and 9.8 N to 49 N) Vickers hardness machines from 24.5 N to 980 N
	Vickers low-load hardness machines	Vickers hardness	Comparison with a reference standard	HV 0.2 to HV 5 Verification of forces including compliance to AS 1817	9.8 N to 49 N
Mass - Determination of mass and calibration of weighing devices	Industrial weighing devices; Laboratory weighing devices; Precision laboratory balances	Mass	Gravimetric measurement against reference mass
Capability Including on site calibration With Calibration and Measurement Capability of - in the range from 0.01 g and up to 250 kg 2 in 10⁶ or 20 μg (whichever is greater) in the range from 0.01g and up to 250 g 3 in 10⁶in the range above 250 g and up to 500 g 3 mg in the range above 500 g and up to 1.1 kg 2 in 10⁶ or 4 mg (whichever is greater) in the range above 1.1 kg and up to 21 kg 4 in 10⁶ in the range above 21 kg and up to 31 kg 5 in 10⁶ in the range above 31 kg and up to 41 kg 5 in 10⁵ in the range above 41 kg and up to 250 kg
Pressure metrology - Pressure and vacuum measuring equipmentincluding on-site calibrations	Digital pressure gauges; Manometers; Mechanical pressure gauges; Pressure recorders; Pressure transducers; Vacuum gauges	Gauge pressure	Comparison with dead weight tester; Comparison with reference instrument	AS 1349 and MSA Test Method 2 MSA Test Method 1	Electrical transducers with dc voltage or dc current output
Capability including on-site calibrations with Calibration and Measurement Capability of- Calibration using a pressure calibrator 0.1 kPa from -100 kPa to 0 kPa 0.04 kPa from 0 kPa to 200 kPa 0.4kPa from 200kPa to 2000 kPa 1.4 kPa from 2000 kPa to 7000 kPa Calibration using a Dead Weight Tester 0.02% or 0.05 kPa (whichever is greater) from 300 kPa to 85 MPa On-site calibration 0.2 kPa from -80 kPa to 200 kPa 1.4 kPa from 200 kPa to 7 MPa 6 kPa from 7 MPa to 35 MPa
Pressure metrology - Pressure standards	Pressure calibrators - Non-dead weight	Gauge pressure	Comparison with dead weight tester; Comparison with reference instrument	MSA Test Method 1	Self indicating and electrical transducers with dc voltage or dc current output
Capability with Calibration and Measurement Capability of- Calibration using a pressure calibrator 0.1 kPa from -100 kPa to 0 kPa 0.04 kPa from 0 kPa to 200 kPa 0.4kPa from 200kPa to 2000 kPa 1.4 kPa from 2000 kPa to 7000 kPa Calibration using a Dead Weight Tester 0.02% or 0.05 kPa (whichever is greater) from 300 kPa to 85 MPa
Temperature metrology - Ancillary temperature measuring equipment	Process calibrators	Resistance to temperature conversion	Direct measurement by electrical input		RTD calibrators (source mode) and RTD indicators (including calibrators in measure mode) from -200 °C to 800 °C
Capability with Calibration and Measurement Capability of - RTD calibrators (source mode) 0.06 °C from -200 °C to 0 °C 0.08 °C from 0 °C to 100 °C 0.07 °C from 100 °C to 400 °C 0.08 °C from 400 °C to 630 °C 0.07 °C from 630 °C to 800 °C RTD indicators (including calibrators in measure mode) 0.09 °C from -200 °C to 0 °C 0.11 °C from 0 °C to 100 °C 0.14 °C from 100 °C to 400 °C 0.17 °C from 400 °C to 630 °C 0.31 °C from 630 °C to 800 °C
		Volt to temperature conversion	Direct measurement by electrical input		Thermocouple calibrators (source mode) Type J Thermocouple from -210 °C to 1 200 °C Type K Thermocouple from -200 °C to 1 372 °C Type N Thermocouple from -200 °C to 1 300 °C Type R Thermocouple from 0 °C to 1 767 °C Type S Thermocouple from 0 °C to 1 767 °C Type T Thermocouple from -250 °C to 400 °C Thermocouple indicators (including calibrators in measure mode) Type J Thermocouple from -210 °C to 1 200 °C Type K Thermocouple from -200 °C to 1 372 °C Type N Thermocouple from -200 °C to 1 300 °C Type R Thermocouple from 0 °C to 1 767 °C Type S Thermocouple from 0 °C to 1 767 °C Type T Thermocouple from -250 °C to 400 °C
Capability with Calibration and Measurement Capability of - Thermocouple calibrators (source mode) Type J Thermocouple 0.49 °C from -210 °C to -100 °C 0.42 °C from -100 °C to 760 °C 0.46 °C from 760 °C to 1 200 °C Type K Thermocouple 0.54 °C from -200 °C to -100 °C 0.42 °C above -100 °C to 120 °C 0.48 °C above 120 °C to 1 000 °C 0.61 °C above 1 000 °C to 1 372 °C Type N Thermocouple 0.61 °C from -200 °C to -100 °C 0.45 °C from -100 °C to 410 °C 0.49 °C above 410 °C to 1 300 °C Type R Thermocouple 0.80 °C from 0 °C to 250 °C 0.57 °C above 250 °C to 1 000 °C 0.61 °C above 1 000 °C to 1 767 °C Type S Thermocouple 0.70 °C from 0 °C to 250 °C 0.57 °C above 250 °C to 1 000 °C 0.68 °C above 1 000 °C to 1 767 °C Type T Thermocouple 0.87 °C from -250 °C to -150 °C 0.46 °C from -150 °C to 0 °C 0.41 °C above 0 °C to 400 °C Thermocouple indicators (including calibrators in measure mode) Type J Thermocouple 0.49 °C from -210 °C to -100 °C 0.42 °C from -100 °C to 760 °C 0.47 °C from 760 °C to 1 200 °C Type K Thermocouple 0.55°C from -200 °C to -100 °C 0.43 °C above -100 °C to 120 °C 0.48 °C above 120 °C to 1 000 °C 0.62 °C from 1 000 °C to 1 372 °C Type N Thermocouple 0.61 °C from -200 °C to -100 °C 0.46 °C from -100 °C to 410 °C 0.49 °C above 410 °C to 1 300 °C Type R Thermocouple 0.80 °C from 0 °C to 250 °C 0.57 °C above 250 °C to 1 000 °C 0.63 °C above 1 000 °C to 1 767 °C Type S Thermocouple 0.71 °C from 0 °C to 250 °C 0.58 °C above 250 °C to 1 000 °C 0.70 °C above 1 000 °C to 1 767 °C Type T Thermocouple 0.87 °C from -250 °C to -150 °C 0.47 °C above -150 °C to 0 °C 0.41 °C above 0 °C to 400 °C
Time and frequency metrology - Frequency and time standards	Frequency standards	Frequency	Measurement against reference standard		100 mHz to 2 GHz
Capability with Calibration and Measurement Capability of - 6.0 in 10⁶ from 100 mHz to 1 kHz 6.0 in 10⁷ from 1 kHz to 50 MHz 2.0 in 10⁷ from 50 MHz to 100 MHz 6.0 in 10⁸ from 100 MHz to 225 MHz 3.0 in 10⁸ from 225 MHz to 1 GHz 6.0 in 10⁹ from 1 GHz to 2 GHz
	Signal sources	Frequency	Measurement against reference standard		100 mHz to 2 GHz
Capability with Calibration and Measurement Capability of - 6 in 10⁶ from 100 mHz to 1 kHz 6.0 in 10⁷ above 1 kHz to 50 MHz 2.0 in 10⁷ above 50 MHz to 100 MHz 6.0 in 10⁸ above 100 MHz to 225 MHz 3.0 in 10⁸ above 225 MHz to 1 GHz 6.0 in 10⁹ above 1 GHz to 2 GHz
Time and frequency metrology - Frequency, time and waveform measuring equipment	Counters	Frequency	Measurement against reference standard		1 Hz to 2.1 GHz
Capability with Calibration and Measurement Capability of - 1.1 in 10⁶ from 1 Hz to 10 Hz 0.6 in 10⁶ from 10 Hz to 2.1 GHz
	Frequency analysers; Frequency meters; Oscilloscopes; Waveform measuring instruments	Time interval	Measurement against reference standard		2 ns to 20 ms 50 ms to 5 s
Capability with Calibration and Measurement Capability of - 85 μs/s from 50 ms to 5 s 28 μs/s from 2 ns to 20 ms
	Frequency analysers; Waveform measuring instruments	Frequency	Measurement against reference standard		Frequency response flatness With internal 50 Ω 5 mVp-p to 5 Vp-p and 100 kHz to 1000 MHz With external 50 Ω 5 mVp-p to 5 Vp-p and 100 kHz to 600 MHz
Capability with Calibration and Measurement Capability of - With internal 50 Ω 4.5% at 5 mVp-p from 100 kHz to 100 MHz 5.0% at 5 mVp-p from 100 to 300 MHz 7.2% at 5 mVp-p from 300 to 600 MHz 2.8% from 10 mVp-p tp 5.5 Vp-p and 100 kHz to 100 MHz 3.2% from 10 mVp-p to 5.5 Vp-p and 100 to 300 MHz 5.0% from 10 mVp-p to 5.5 Vp-p and 300 to 600 MHz 8.2% from 5 mVp-p to 5.5 Vp-p from 600 to 1000 MHz With external 50 Ω 5.7% at 5 mVp-p from 100 kHz to 100 MHz 6.1% at 5 mVp-p from 100 to 300 MHz 7.9% at 5 mVp-p from 300 to 600 MHz 4.4% from 10 mVp-p to 5.5 Vp-p from 100 kHz to 100 MHz 4.6% from 10 mVp-p to 5.5 Vp-p from 100 to 300 MHz 6.1% from 10 mVp-p to 5.5 Vp-p from 300 to 600 MHz
		Voltage	Measurement against reference standard		For DC voltage with 1 MΩ input resistance 5 mV to 100 V For DC voltage with 50 Ω input resistance 5 mV to 5 V For square wave with 1 MΩ input resistance 5 mV to 100 V For square wave voltage with 50 Ω input resistance 5 mV to 100 V
Capability with Calibration and Measurement Capability of - For DC voltage with 1 MΩ input resistance 0.06% + 40 μV at 5 mV 0.15% from 10 to 50 mV 0.07% from 50 mV to 0.5 V 0.06% from 0.5 V to 100 V For DC voltage with 50 Ω input resistance 0.29% + 40 μV at 5 mV 0.38% from 10 to 50 mV 0.30% from 50 mV to 0.5 V 0.29% from 0.5 V to 5 V For square wave with 1 MΩ input resistance 0.12% + 40 μV at 5 mV 0.21% from 10 to 50 mV 0.13% from 50 mV to 0.5 V 0.12% from 0.5 V to 100 V For square wave voltage with 50 Ω input resistance 0.29% + 40 μV at 5 mV 0.38% from 10 to 50 mV 0.30% from 50 mV to 0.5 V 0.29% from 0.5 V to 100 V
	Frequency meters; Oscilloscopes	Frequency	Measurement against reference standard		1 Hz to 2.1 GHz
Capability with Calibration and Measurement Capability of - 1.1 in 10⁶ from 1 Hz to 10 Hz 0.6 in 10⁶ from 10 Hz to 2.1 GHz
	Tachometers	Rotational speed	Measurement against reference standard		Optical Tachometers 240 rpm to 60000 rpm
Capability with Calibration and Measurement Capability of - 1.1 rpm from 240 rpm to 999 rpm 1.4 rpm from 1000 rpm to 19997 rpm 2.4 rpm above 19998 rpm to 60000 rpm
Torque - Torque measuring and testing equipment	Torque transducers; Torque wrenches	Torque	Comparison with a reference standard	Transducers to test method CP035a-1
Capability with Calibration and Measurement Capability of - 0.2% up to 1500 N.m; 0.5% above 1500 N.m up to 18000 N.m

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.

New South Wales Laboratory

Scope of Accreditation

ISO/IEC 17025 (2017)

Benefits of being a NATA accredited organisation