Boral Resources (Country) Pty Limited

Site

Newcastle Laboratory

Accreditation No.

586

Site No.

579

Date of Accreditation

30 Jun 1966

Address

24 Gross Street
Carrington, NSW 2294
Australia

boral.com.au

Contact

Mr Jacob Thompson P: +61 0401895545

Availability

Services available to external clients

Scope of Accreditation

Newcastle Laboratory

ISO/IEC 17025 (2017)

Infrastructure and Asset Integrity

Service Product Determinant Technique Procedure Limitations
Establishment of annex facilities Materials defined by all or some for which the site is accredited Determinations defined by all or some for which the site is accredited Techniques defined by all or some for which the site is accredited
Evaluation of geotechnical and civil construction material - Aggregate contaminants Aggregates Clay and fine silt Settling AS 1141.33
Evaluation of geotechnical and civil construction material - Aggregate properties Aggregates Shape Proportional calliper AS 1141.14
Moisture content Drying oven RMS (NSW) Method T262; TfNSW TS 02799.39
Particle size distribution Sieve analysis; Sieve analysis of material finer than 75 µm AS 1141.11.1
AS 1141.12
Shape Average least dimension AS 1141.20.1
AS 1141.20.2
Evaluation of geotechnical and civil construction material - Concrete, grout and mortar consistence in-situ Concrete, grout and mortar Slump flow J-ring BS EN 12350-12
TS 02800.58
Segregation Penetration test ASTM C1712
Compactibility index Not applicable

AS 1012.3.4

Grout consistency Not applicable

RMS (NSW) Method T375

TfNSW TS 02800.49

Slump flow Cone; T500

AS 1012.3.1, ASTM C1611

Evaluation of geotechnical and civil construction material - Concrete, grout and mortar properties Concrete, grout and mortar Air content of freshly mixed concrete Reduced air pressure

AS 1012.4.2

Mass per unit volume - Hardened concrete Dimensions; Water displacement

AS 1012.12.1, AS 1012.12.2


Flexural strength Modulus of rupture

AS 1012.11

Compressive strength Core; Cube; Cylinder

AS 1012.9, AS 1012.14


Mass per unit volume - Fresh concrete In-situ measurement using fixed volume measure

AS 1012.5

Evaluation of geotechnical and civil construction material - Concrete, grout and mortar specimen manufacture and curing Concrete, grout and mortar Specimen manufacture and curing In-situ manufacture and curing of drying shrinkage specimens

AS 1012.8.4

Specimen manufacture and curing Curing cylinder specimens in the laboratory

AS 1012.8.1

Specimen manufacture and curing In-situ manufacture and curing of grout and mortar cubes AS 1012.8.3
Specimen manufacture and curing In-situ manufacture and curing of cylindrical specimens

AS 1012.8.1

Specimen conditioning Wet conditioning of hardened concrete core specimens

AS 1012.14

Specimen manufacture and curing Manufacture and curing of cylindrical specimens in the laboratory TS 02800.57
Specimen manufacture and curing In-situ manufacture and curing of flexural strength specimens

AS 1012.8.2

Sample collection Aggregates Not applicable Aggregate from a stockpile AS 1141.3.1
Concrete, grout and mortar Not applicable Fresh concrete from a mixer; Fresh concrete from deposited concrete

AS 1012.1

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.