Marine Inspection Service Pty Ltd

Marine Inspection Service

Site

Perth NDT and Mechanical Testing Laboratory

Accreditation No.

12425

Site No.

12418

Date of Accreditation

11 Nov 1996

Address

8 Egmont Road
Henderson, WA 6166
Australia

misperth.com.au

Contact

Mr Wayne Cridland P: +61 (08) 65954000

Availability

Services available to external clients

Marine Inspection Service Pty Ltd address map

Scope of Accreditation

Print scopes
Perth NDT and Mechanical Testing Laboratory

ISO/IEC 17025 (2017)

Infrastructure and Asset Integrity

Service Product Determinant Technique Procedure Limitations
Leak evaluation of welds Metallic storage vessels Leakage Differential pressure box In-house method TP-M-02, API 620, API 650, ASME V Article 10, ASTM E515
Non-destructive testing (NDT) - Magnetic particle testing Metallic surfaces - Magnetic Defect detection and characterisation AC magnetic flow
Non-destructive testing (NDT) - Penetrant testing Metallic surfaces Defect detection and characterisation Solvent removable; Water washable
Non-destructive testing (NDT) - Radiographic testing Castings - Cast irons, steel and alloy steels; Castings - Non-ferrous metals and alloys; Welded joints - Aluminium alloys; Welded joints - Clad and overlaid steel; Welded joints - Copper and copper-nickel alloys; Welded joints - Ferritic materials; Welded joints - Stainless steel, austenitic and duplex materials; Welded joints - Titanium and titanium alloys Defect detection and characterisation Film radiography
Non-destructive testing (NDT) - Ultrasonic testing Bonded metals; Castings - Cast irons, steel and alloy steels; Rolled or wrought steel products; Welded joints - Ferritic materials; Welded joints - Stainless steel, austenitic and duplex materials Defect detection and characterisation A-scan - Manual
Castings; Forgings; Metallic components; Metallic piping; Metallic plate; Metallic tubes - Ferromagnetic materials; Metallic tubes - Non-ferromagnetic materials Material thickness - Spot/grid only A-scan - Manual; Thickness meter
Material loss characterisation; Profiling A-scan - Manual
Non-destructive testing (NDT) - Ultrasonic testing - Specialised - Phased array (PAUT) Welded joints - Ferritic materials Defect detection and characterisation Semi-automatic
Non-destructive testing (NDT) - Ultrasonic testing - Specialised - Time of flight diffraction (ToFD) Welded joints - Ferritic materials Defect detection and characterisation Semi-automatic
Non-destructive testing (NDT) - Visual testing - Prior to initial service Welded joints Defect detection Visual testing

ISO/IEC 17025 (2017)

Manufactured Goods

Service Product Determinant Technique Procedure Limitations
Material performance evaluation of elastomers, plastics and composite products Belting Pull-out strength Not applicable

AS 1333 Appendix H

0.5 kN to 1000 kN
Material performance evaluation of metal products Prepared metallic test specimens Hardness Brinell

AS 1816.1

49 N to 29.4 kN
Hardness Rockwell - Scale B; Rockwell - Scale C

AS 1815.1, ASTM E18

 Rockwell B: 20–100 HRB;
Rockwell C: 20–70 HRC
Hardness Brinell - Portable tester

AS 1816.1

4.9 kN to 29.4 kN
Hardness Vickers

AS 1817.1, ASTM E384

9.8 N to 980 N
Tensile properties Tensile tests with control of strain rate, including yield stress and proof stress

AS 1391, ASTM A370, ASTM E8/E8M, ISO 6892.1

0.5 kN to 1000 kN
Impact resistance Charpy - Assessment of fracture appearance; Charpy V-notch - Impact value

AS 1544.2, ASTM E23 

-101 to 100°C and at -196°C
Welded test specimens Fracture test Visual examination

AS/NZS 2205.4.1
Shear strength Not applicable

AS/NZS 1554.3, BS EN ISO 15630-2
Hardness Brinell

AS 1816.1

49 N to 29.4 kN
Macroscopic examination Macroscopic examination

 AS/NZS 2205.5.1
Bending properties Not applicable

ASTM A370
Hardness Brinell - Portable tester

AS 1816.1

4.9 kN to 29.4 kN
Bending properties Transverse guided bend

AS/NZS 2205.3.1, AS 2205.3.2, AS 2205.3.4, AS 2205.3.5
Hardness Vickers

AS 1817.1,  ASTM E384

9.8 N to 980 N
Hardness Rockwell - Scale B; Rockwell - Scale C

AS 1815.1, ASTM E18

 Rockwell B: 20–100 HRB;
Rockwell C: 20–70 HRC
Impact resistance Charpy - Assessment of fracture appearance; Charpy V-notch - Impact value

AS 1544.2, ASTM E23

from -101 to 100°C and at -196°C
Tensile properties All-weld-metal tensile; Axial tensile; Longitudinal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse butt tensile; Transverse joggle-butt tensile; Transverse tensile; Uniaxial tension

AS 1391, ASTM A370, ASTM E8/E8M, ISO 6892.1, ISO 6892.2 

0.5 kN to 1000 kN

ASTM A370 tests are done for compliance to DNVGL-ST-F101:2017 and ASME IX - 2021

ISO/IEC 17025 (2017)

Materials

Service Product Determinant Technique Procedure Limitations
Analysis of metals and alloys Aluminium and aluminium alloys; Chromium and chromium alloys; Copper and copper alloys; Stainless steels Comparative indication of elemental content Portable X-ray fluorescence equipment UNS S32760; UNS C95810; UNS C70600; UNS S30403; UNS S31600; UNS K81340; UNS S32205; UNS A95083; UNS A96082; UNS A96060; UNS C63200
Metallic corrosion evaluation Austenitic, duplex and nickel-chromium alloys Pitting corrosion resistance Ferric chloride pitting

ASTM G48 Method A
Intergranular corrosion resistance Copper-copper sulfate-sulfuric acid; Ferric sulfate - Sulfuric acid

ASTM A262 Practice E;

ASTM G28 Method A

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.