HMA Instrumentation Pty Ltd

Site

Standard Laboratory

Accreditation No.

12195

Site No.

12188

Date of Accreditation

14 May 1997

Address

Unit 2 5/6 Byfield Street
Macquarie Park, NSW 2113
Australia

hmagroup.com.au

Contact

Mr Stuart Peck P: +61 0403784404

Availability

Services available to external clients

HMA Instrumentation Pty Ltd address map

Scope of Accreditation

Print scopes
Standard Laboratory

ISO/IEC 17025 (2017)

Calibration

  • The uncertainty of measurement is reported as an expanded uncertainty having a level of confidence of 95% unless stated otherwise
Service Product Determinant Technique Procedure Limitations
Pressure metrology - Pressure and vacuum measuring equipment Digital pressure gauges; Mechanical pressure gauges; Pressure transducers; Vacuum gauges Gauge pressure; High vacuum By pressure calibrator; Comparison with dead weight tester

AS 1349;

MSA Test Method 1; MSA Test Method 2;

Capability

Including digital pressure gauges and electrical transducers with dc voltage,
pneumatic range -100 kPa to 40 MPa and hydraulic range from 120 kPa to 110 MPa
with Calibration and Measurement Capability of-
0.05 kPa from -100 kPa to 100 kPa
0.027% reading or 0.1 kPa (whichever is greater) above 100 kPa to 5500 kPa
0.045% reading or 0.3 kPa (whichever is greater) above 5500 kPa to 110 MPa

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.