Projects etc Pty Ltd

Site

t/a Safety Related Control Systems

Accreditation No.

17171

Site No.

18779

Date of Accreditation

06 Jan 2010

Address

3 Clunies Ross Court, Brisbane Technology Park
Eight Mile Plains, QLD 4113
Australia

projectsetc.com

Contact

Mr George Rutherford P: +61 (07) 31478285

Availability

Type A Inspection Body

Scope of Accreditation

Print scopes
t/a Safety Related Control Systems

ISO/IEC 17020 (2012)

Infrastructure and Asset Integrity

Service Product Determinant Procedure Limitations
Industrial machinery - Inspection Automated systems Performance level (PL); Risk assessment; Safety integrity level (SIL)

AS/NZS 4024.36xx series of standards for Conveyors and safety requirements,
AS 4024 (all parts) Safety of machinery
AS 4024.1204, IEC 60204-1, Safety of machinery - Electrical;
NFPA 79,
SPE-1000
AS 4024.1501, AS 4024.1502 and AS 4024.1503 - ISO 13849-1:1999, ISO 13849-1:2006 and ISO 13849-2:2003, Safety of machinery - control systems
ISO 10218-1, 10218-2 Robots and Robot systems for industrial environment 

European Directive 2006/42/EC,
SEMI S2, S10; S22;
Acceptance inspection; Fabrication inspection; Installation inspection; Modification inspection

AS/NZS 4024.36xx series of standards for Conveyors and safety requirements,

AS 4024 (all parts) Safety of machinery

AS 4024.1204, IEC 60204-1, Safety of machinery - Electrical; 

NFPA 79, 

SPE-1000

AS 4024.1501, AS 4024.1502 and AS 4024.1503 - ISO 13849-1:1999, ISO 13849-1:2006 and ISO 13849-2:2003, Safety of machinery - control systems

ISO 10218-1, 10218-2 Robots and Robot systems for industrial environment

European Directive 2006/42/EC, 

SEMI S2, S10; S22;

ISO/TS 15066 Robots and robotic devices - Collaborative robots
ISO 13482 Robots and robotic devices - Safety requirements for personal care robots
Acceptance inspection; Assessment; Fabrication inspection; Installation inspection; Modification inspection

SEMI S8

Inspection of semiconductor manufacturing equipment for ergonomic safety
Automated systems; Conveyors; Gearboxes; Machines; Robots Design verification; Examination

EU Machinery Directive 2006/42/EC

Supply of Machinery (Safety) Regulations 2008 (SI 2008/1597)

Capability

EC type examination for Annex IV Machinery of all types listed
Assessment of full quality assurance route as detailed in Annex X
Recognised as a Notified Body for the EU Machinery Directive 2006/42/EC for the Commonwealth of Australia - EU MRA and the Commonwealth of Australia - EFTA MRA
Recognised as an Approved Body for the Supply of Machinery (Safety) Regulations 2008 (SI 2008/1597)  for the Commonwealth of Australia - UK MRA
Industrial systems - Inspection Functional safety Witnessing

IEC 60068, 61131-2

Witnessing of testing at manufacturer's premises including for environmental and failure-rate data
Design verification

Codes: AS 61508, IEC 61508 and 

derived product standards including ISO 22201-1 and EN 81-20 and EN 81-50 for Lifts and elevators, EN 50156-1 for Furnaces and ancillary equipment, IEC 60601-1 and 60601-1-2 Medical equipment, AS 2578 (Withdrawn) and EN 12675 for Traffic signal controllers, IEC 61131-6 for Programmable controllers (PLC)

derived sectoral standards including AS IEC 61511 family - process industry plant, ISO 26262 Road vehicles, EN 50126, EN 50128, EN 50129, IEC 62278, IEC 62279, IEC 62425 - Railway and Signalling applications, ISO 15998 Earth-moving equipment

derived component standards including IEC 61800-5-2 Adjustable speed drives

derived systems standards including IEC 61784-3 and parts for Functional safety fieldbusses, IEC/TR 62513 Guidelines for the use of communications systems in safety related applications, EN 50556 for Road traffic signal systems

Capability

Design verification to concept and main assessment stages for safety-related aspects
Assessment

AS 62061, IEC 62061 and related product standards

Determination of functional safety of safety-related electrical, electronic and programmable electronic control systems
Performance level (PL); Risk assessment; Safety integrity level (SIL)

AS 61508

ISO/IEC 17020 (2012)

Manufactured Goods

Service Product Determinant Procedure Limitations
Electrical equipment - Evaluation Electrical equipment Witnessing

IEC 61131-2, 61800-5-1,

Witnessing of testing at manufacturer's premises including for environmental and electrical safety
Design verification

AS/NZS 3820, European Low Voltage Directive 2014/35/EU
Electromagnetic compatibility (EMC) assessment of manufactured goods Manufactured electrical goods Design verification; Examination

EU EMC Directive 2014/30/EU

UK Electromagnetic Compatibility Regulations (SI 2016/1091)

Capability

Review of technical documentation, Issue of Evaluation Report and Issue of EU Type Examination Certificate
Recognised as a Notified Body for the EU EMC Directive 2014/30/EU for the Commonwealth of Australia - EU MRA and the Commonwealth of Australia - EFTA MRA
Recognised as an Approved Body for the Electromagnetic Compatibility Regulations (SI 2016/1091) for the  Commonwealth of Australia - UK MRA
Design verification

IEC 61000-1-2, IEC 61000-6-7, 61326-3-1, 61326-3-2

SEMI E33

Design verification of EMC Immunity requirements for safety related systems in general and specified industrial environments and industrial locations

Design verification of EMC Immunity requirements for Semiconductor manufacturing equipment
Assessment; Design verification

Australian EMC Framework covering generic and specific emission standards as listed in Schedule 1 of the Radiocommunications Labelling (Electromagnetic Compatibility) Notice 2017

EMC emission control of devices
Medical devices and disability aids - Evaluation Medical devices Design verification

ISO 14971 Medical devices
Software for medical devices Assessment; Design verification; Risk assessment

IEC 62304

Safety-related features

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.