Trident Australia Pty Ltd

Site

Trident Australia Pty Ltd

Accreditation No.

15503

Site No.

16437

Date of Accreditation

04 Dec 2006

Address

15 Magnet Road
Canning Vale, WA 6155
Australia

tridentaustralia.com.au

Contact

Mr Troy Hutchinson P: +61 (08) 94561300

Availability

Services available to external clients

Trident Australia Pty Ltd address map

Scope of Accreditation

Print scopes
Trident Australia Pty Ltd

ISO/IEC 17025 (2017)

Calibration

  • The uncertainty of measurement is reported as an expanded uncertainty having a level of confidence of 95% unless stated otherwise
Service Product Determinant Technique Procedure Limitations
DC and low frequency electrical metrology - Electrical measurement and test equipment Ammeters; Appliance testers; Current clamps; Digital multimeters (DMM); Insulation resistance test equipment; Ohm meters; Voltmeters AC current; AC voltage; DC current; DC voltage; Resistance Comparison with a reference standard

Capability

with Calibration and Measurement Capability of

DC Voltage
0.01% of reading from 1 mV to 1020 V

AC Voltage
0.3% of reading from 5 mV to 250 mV at 50 Hz to 1 kHz
0.07% of reading from above 250 mV to 1020 V at 45 Hz to 1kHz
DC Current
0.06% of reading from 1 μA to 5 A
0.15% of reading above 5 A to 30 A
Current Clamp Meters
0.65% + 2mA above 1 A to 30 A

AC Current
0.3% of reading from 100 µA to 1 mA at 50 Hz to 1 kHz
0.2% of reading above 1mA to 300 mA at 50 Hz to 1 kHz
0.1% of reading above 300mA to 5 A at 50 Hz to 1 kHz
0.2% of reading above 5A to 30 A at 50 Hz to 1 kHz
Current Clamp Meters
0.8% + 4 mA above 1 A to 30 A at 50 Hz to 1 kHz

Resistance
0.25% of reading from 10 mΩ to 100 mΩ
1.00% of reading above 100 mΩ to 10 Ω
0.15% of reading above 10 Ω to 30 MΩ
0.10% of reading above 30 MΩ to 100 MΩ
0.45% of reading above 100 MΩ to 300 MΩ
 
 
DC and low frequency electrical metrology - Electrical measurement and test equipment Insulation resistance test equipment DC voltage; Resistance Comparison with a reference standard

Capability

with Calibration and Measurement Capability of
Insulation resistance
0.3% from 10 kΩ to 10 MΩ from 50 V to 1 kV
0.5% above 10 MΩ to 1 GΩ from 50 V up to 1 kV
1% above 1GΩ to 10 GΩ from 50 V to 1 kV
3% above 10 GΩ to 100 GΩ from 500 V to 5 kV

Output Voltage for Insulation Test up to 5.5 kV (DC voltage)

DC Voltage
0.2% of reading from 50 V to 1000 V
0.6% of reading from 1 kV to 5.5 kV


DC and low frequency electrical metrology - Electrical standards Precision resistors; Resistance boxes Resistance Comparison with a reference standard In-house (WI-NATA40)

Capability

with Calibration and Measurement Capability of
0.25% of reading from 10 mΩ to 100 mΩ
0.05% of reading above 100 mΩ to 10 Ω
0.01% of reading above 10 Ω to 100 kΩ
0.02% of reading above 100 kΩ to 10 MΩ
0.1% of reading above 10 MΩ to 100 MΩ
1% of reading above 100 MΩ to 1 GΩ
Pressure metrology - Pressure and vacuum measuring equipment Digital pressure gauges; Mechanical pressure gauges; Pressure recorders; Pressure transducers Gauge pressure Comparison with dead weight tester; Comparison with reference instrument

Pressure including test and vacuum gauges to MSA Test Method 2;

Self indicating and electrical transducers with dc voltage or dc current output MSA Test Method 1

 10 kPa to 276 MPa (40,000 psi)
Self indicating and electrical transducers with dc voltage or dc current output

Capability

With calibration and measurement capability of -

0.03% of reading or 0.005 kPa (whichever is greater)  in the range of 10 kPa to 276 MPa (40,000 psi)

ISO/IEC 17025 (2017)

Infrastructure and Asset Integrity

Service Product Determinant Technique Procedure Limitations
Evaluation of mechanical performance of pressure equipment Hose and hose assemblies Hydrostatic pressure Not applicable AS 1180.5 Section 7 (1999),
ISO 1402 Section 8.1		 up to 300 MPa
Valves Hydrostatic pressure; Leakage Not applicable API 527 section 4 Up to 200 MPa
Leakage; Pneumatic pressure Not applicable API 527 sections 2 and 5 Up to 137 MPa

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.