National Association of Testing Authorities, Australia
Scope of Accreditation
Boral Resources (SA) Pty Ltd
Site
Stonyfell Laboratory – Boral Testing Services
Accreditation No.
1003
Site No.
996
Date of Accreditation
08 Jun 1972
Contact
Availability
Services available to external clients
Scope of Accreditation
ISO/IEC 17025 (2017)
Environment
| Service | Product | Determinant | Technique | Procedure |
|---|---|---|---|---|
| Analysis for physical and chemical characteristics | Air - Ambient | Ash; Combustible matter; Deposited matter; Deposited matter - Insoluble; Deposited matter - Soluble | Classical |
AS/NZS 3580.10.1 |
| Sample collection | Atmospheric dust fall | Not applicable | Deposit gauge |
AS/NZS 3580.10.1 |
ISO/IEC 17025 (2017)
Infrastructure and Asset Integrity
| Service | Product | Determinant | Technique | Procedure | Limitations |
|---|---|---|---|---|---|
| Evaluation of geotechnical and civil construction material - Aggregate abrasion | Aggregates | Abrasion resistance | Los Angeles machine value |
AS 1141.23 |
|
| Evaluation of geotechnical and civil construction material - Aggregate contaminants | Aggregates | Coarse aggregate quality | Visual comparison |
AS 1141.30.1; RC (Vic) Method 372.01 |
|
| Clay and fine silt | Settling |
AS 1141.33 |
|||
| Organic impurities | Colour test |
AS 1141.34 |
|||
| Weak particles contaminants | Sieve analysis |
AS 1141.32 |
|||
| Evaluation of geotechnical and civil construction material - Aggregate properties | Aggregates | Shape | Flakiness |
AS 1141.15; DPTI (SA) Method MAT-TP241 |
|
| Particle density of coarse aggregate | Weighing-in-water |
AS 1141.6.1 |
|||
| Shape | Crushed faces |
AS 1141.18 |
|||
| Shape | Flat particles |
DPTI (SA) Method MAT-TP244 |
|||
| Particle size distribution | Sieve analysis |
AS 1141.11.1 |
|||
| Particle density of fine aggregate | Weighing-in-water |
AS 1141.5 |
|||
| Bulk density | Compacted; Uncompacted |
AS 1141.4 |
|||
| Shape | Proportional calliper |
AS 1141.14 |
|||
| Shape | Elongation |
DPTI (SA) Method MAT-TP240 |
|||
| Shape | Average least dimension |
AS 1141.20.1, AS 1141.20.2 |
|||
| Particle size distribution | Sieve analysis of material finer than 75 µm |
AS 1141.12 |
|||
| Evaluation of geotechnical and civil construction material - Aggregate strength | Aggregates | Aggregate crushing value | Not applicable |
AS 1141.21 |
|
| Wet/dry strength variation | Not applicable |
AS 1141.22 |
|||
| Evaluation of geotechnical and civil construction material - Concrete, grout and mortar consistence in-situ | Concrete, grout and mortar | Slump flow | Cone; J-ring; T500 |
AS 1012.3.1, AS 1012.3.5 |
|
| Evaluation of geotechnical and civil construction material - Concrete, grout and mortar permeability | Concrete, grout and mortar | Permeability | Volume change with water absorption - Permeable voids | AS 1012.21 | |
| Evaluation of geotechnical and civil construction material - Concrete, grout and mortar properties | Concrete, grout and mortar | Compressive strength | Core |
AS 1012.14 |
|
| Air content of freshly mixed concrete | Reduced air pressure |
AS 1012.4.2 |
|||
| Mass per unit volume - Fresh concrete | In-situ measurement using fixed volume measure |
AS 1012.5 |
|||
| Compressive strength | Cylinder |
AS 1012.9 |
|||
| Mass per unit volume - Hardened concrete | Dimensions |
AS 1012.12.1 |
|||
| Indirect tensile strength | Brazil |
AS 1012.10 |
|||
| Evaluation of geotechnical and civil construction material - Concrete, grout and mortar shrinkage | Concrete, grout and mortar | Drying shrinkage specimen measurement | Not applicable |
AS 1012.13 |
|
| Evaluation of geotechnical and civil construction material - Concrete, grout and mortar specimen manufacture and curing | Concrete, grout and mortar | Specimen manufacture and curing | In-situ manufacture and curing of drying shrinkage specimens; Manufacture and curing of drying shrinkage specimens in the laboratory |
AS 1012.8.4 |
|
| Specimen manufacture and curing | In-situ manufacture and curing of cylindrical specimens; Manufacture and curing of cylindrical specimens in the laboratory |
AS 1012.8.1 |
|||
| Specimen conditioning | Dry conditioning of hardened concrete core specimens; Wet conditioning of hardened concrete core specimens |
AS 1012.14 |
|||
| Specimen manufacture; Specimen manufacture and curing | Mixing concrete in the laboratory |
AS 1012.2 |
|||
| Specimen manufacture and curing | In-situ manufacture and curing of flexural strength specimens; Manufacture and curing of flexural strength specimens in the laboratory |
AS 1012.8.2 |
|||
| Evaluation of geotechnical and civil construction material - Soil classification | Soils | Plasticity index | Casagrande |
AS 1289.3.3.1 |
|
| Sieve analysis | Not applicable |
AS 1289.3.6.1; DPTI (SA) Method MAT-TP134 |
|||
| Linear shrinkage |
AS 1289.3.4.1 |
||||
| Moisture content | Microwave oven |
AS 1289.2.1.4 |
|||
| Plastic limit | Not applicable |
AS 1289.3.2.1 |
|||
| Liquid limit | Casagrande one point |
AS 1289.3.1.2; DPTI (SA) Method MAT-TP143 |
|||
| Liquid limit | Casagrande four point |
AS 1289.3.1.1; DPTI (SA) Method MAT-TP141 |
|||
| Moisture content | Drying oven |
AS 1289.2.1.1 |
|||
| Evaluation of geotechnical and civil construction material - Soil pre-treatment | Soils | Soil pre-treatment | Not applicable |
AS 1289.1.1 |
|
| Sample collection | Aggregates | Not applicable | Aggregate from a conveyor belt; Aggregate from a stockpile; Aggregate from a truck |
AS 1141.3.1; DPTI (SA) Method MAT-TP226 |
|
| Concrete, grout and mortar | Not applicable | Hardened concrete by coring |
AS 1012.14 |
||
| Not applicable | Fresh concrete from a mixer |
AS 1012.1 |
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.
Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.
Accreditation No.
1003
Site No.
996
Print date
18 Apr 2024
