National Association of Testing Authorities, Australia
Scope of Accreditation
Assured Environmental Pty Ltd
Site
AE
Accreditation No.
19703
Site No.
22914
Date of Accreditation
01 Jun 2017
Contact
Availability
Services available to external clients
Scope of Accreditation
ISO/IEC 17025 (2017)
Environment
| Service | Product | Determinant | Technique | Procedure |
|---|---|---|---|---|
| Analysis for hydrocarbons | Emissions - Industrial | Volatile organic compounds (VOCs); Volatile organic compounds (VOCs) - Total | Flame ionisation detector (FID) |
NSW EPA TM-34 and USEPA methods 18; 21; 25A USEPA Method PS8; 8A; 9 and NSW EPA CEM-8; 8A; 9 |
| Analysis for physical and chemical characteristics | Air - Ambient | Sulfur dioxide | Direct reading instrument | AS 3580.4.1 |
| Carbon monoxide | Nondispersive infrared (NDIR) |
AS 3580.7.1 |
||
| Volatile organic compounds (VOCs) | Direct reading instrument | AS 3580.11.1 | ||
| Particulate matter - Deposited | Gravimetric |
AS 3580.10.1 |
||
| Suspended particulate matter - PM2.5 | Beta attenuation monitors | AS 3580.9.12 | ||
| Suspended particulate matter - PM2.5 | Tapered element oscillating microbalance (TEOM) | AS 3580.9.13 | ||
| Suspended particulate matter - PM2.5 | High volume gravimetric | AS 3580.9.14 | ||
| Data validation | Calculation | AS 3580.19 | ||
| Nitrogen - Oxidised | Chemiluminescence |
AS 3580.5.1 |
||
| Particulate matter - PM10; Particulate matter - Total; Suspended particulate matter - PM10; Suspended particulate matter - Total | High volume gravimetric; Low volume gravimetric |
AS 3580.9.3 - Total AS 3580.9.6 - PM10 AS 3580.9.9 - PM10 |
||
| Suspended particulate matter - PM10 | Beta attenuation monitors | AS 3580.9.11 | ||
| Suspended particulate matter - PM10 | Tapered element oscillating microbalance (TEOM) | AS 3580.9.8 | ||
| Suspended particulate matter - PM10; Suspended particulate matter - Total | High volume gravimetric |
AS 3580.9.3 AS 3580.9.6 |
||
| Air - Road tunnels | Velocity | Ultrasonic | AS/NZS 3580.18:2017 | |
| Carbon monoxide; Nitric oxide; Nitrogen dioxide; Visibility | Direct reading instrument | AS/NZS 3580.18:2017 | ||
| Emissions - Industrial | Carbon monoxide; Nitrogen oxide; Oxygen | Gas analyser | CTM-030 | |
| Carbon dioxide (CO2); Carbon monoxide; Nitrogen - Oxidised; Oxygen; Sulfur dioxide | Gas analyser |
SA EPA 3.14 |
||
| Particulate matter - Baghouses; Particulate matter - Condensable; Particulate matter - Low level; Particulate matter - Non-sulfuric acid | Gravimetric |
USEPA methods 5B; 5D; 5I; 202 |
||
| Sulfur trioxide (sulfuric anhydride); Sulfuric acid mist | Titration |
NSW EPA TM-3 and USEPA method 8 |
||
| Flow rate; Velocity | Calculation | CTM-019 | ||
| Cyanate | Isokinetic | CTM-036 | ||
| Sulfur dioxide; Sulfuric acid as SO3 | Titration | CTM-013B | ||
| Particulate matter - Total | Gravimetric |
NSW EPA TM-15 |
||
| Velocity | Calculation |
NSW EPA TM-2; USEPA method 2 and ISO 10780 |
||
| Sulfur dioxide; Sulfuric acid mist | Titration | CTM-013 | ||
| Sulfur dioxide; Sulfuric acid as SO3 | Titration | CTM-013A | ||
| Carbon monoxide; Nitrogen dioxide; Nitrogen oxide; Oxygen | Gas analyser | CTM-034 | ||
| Sulfur - Total reduced | Gas analyser |
NSW EPA TM-33 and USEPA methods 16A; 16B; PS5 (CEMS 5) |
||
| Volatile organic compounds (VOCs) | Flame ionisation detector (FID) | CTM-042 | ||
| Opacity; Smoke | Continuous monitoring analyser | USEPA Method PS1 and NSW EPA CEM-1 | ||
| Particulate matter - Total | Isokinetic |
AS 4323.2 |
||
| Sample preparation | Calculation |
Appendix 8 of approved methods for the sampling and analysis of air pollutants in NSW |
||
| Carbon monoxide | Continuous monitoring analyser; Electrochemical gas analyser; Nondispersive infrared (NDIR) |
NSW EPA TM-32 and USEPA method 10 USEPA Method PS4; 4A andNSW EPA CEM-4; 4A |
||
| Nitric oxide; Nitrogen - Oxidised; Nitrogen dioxide | Electrochemical gas analyser | CTM-022 | ||
| Smoke | Ringelmann chart |
NSW TM-37 and USEPA method 22 |
||
| Nitrogen - Oxidised; Sulfur dioxide | Continuous monitoring analyser | USEPA Method PS2 and NSW EPA CEM-2 | ||
| Nitrogen - Oxidised | Continuous monitoring analyser |
NSW EPA TM-11; USEPA method 7D and USEPA method 7E |
||
| Odour | Olfactometry |
AS 4323.3 and NSW OM-7 AS EN 13725AS EN 13725 sup 1 |
||
| Dry gas density | Calculation; Gravimetric; Volumetric |
NSW EPA TM-23 and USEPA method 3 |
||
| Coarse particulates: PM2.5 - PM10 | Gravimetric |
NSW EPA OM-9 |
||
| Sulfur dioxide | Gas analyser; Titration |
NSW EPA TM-4; USEPA method 6 and USEPA method 6C |
||
| Particulate matter - PM10; Particulate matter - PM2.5 | Gravimetric | CTM-039 | ||
| Nitrogen - Oxidised; Oxygen; Sulfur dioxide | Gas analyser |
USEPA method 20 |
||
| Particulate matter | Gravimetric | CTM-003 | ||
| Emissions - Industrial; Emissions - Stack | Flow rate | Calculation |
CTM-041 USEPA Method PS6 and NSW EPA CEM-6 |
|
| Blackness of smoke | Ringelmann chart | AS3543 - (1989) and NSW EPA TM-16 | ||
| Emissions - Stack | Carbon dioxide (CO2) | Continuous monitoring analyser |
NSW EPA TM-24 and USEPA method 3A USEPA Method PS3 and NSW EPA CEM-3 |
|
| Particulate matter | Gravimetric | USEPA Method PS11 and NSW EPA CEM-11 | ||
| Oxygen | Continuous monitoring analyser |
NSW EPA TM-25 and USEPA method 3A USEPA Method PS3 and NSW EPA CEM-3 |
||
| Particulate matter | Gravimetric |
USEPA method 5 and 17 |
||
| Emissions - Stationary sources | Particulate matter; Suspended particulate matter - PM10 | Gravimetric | CTM-002 | |
| Phenols; Phenols - Total | CTM-032 | |||
| Emissions; Emissions - Engine | Ammonia | Gas analyser | CTM-038 | |
| Analysis of dust | Air - Indoor | Dust - Inhalable; Volume measurement | Gravimetric |
AS 3640 |
| Dust - Respirable; Volume measurement | Gravimetric |
AS 2985 |
||
| Atmospheric pollution monitoring | Emissions - Industrial | Benzene | GC-TCD | CTM-014 |
| Carbon tetrachloride (tetrachloromethane); Vinyl chloride | GC-TCD | CTM-011 | ||
| Meteorological monitoring | Atmosphere | Pressure; Rainfall; Rainfall - Calculated; Relative humidity (RH); Temperature; Wind direction; Wind speed - Horizontal | Barometer; Calculation; Hygrometer; Rainfall gauge; Temperature probe; Ultrasonic wind sensor | AS 3580.14 |
| Sample collection | Air - Ambient | Not applicable | Siting of air monitoring equipment |
AS 3580.1.1 |
| Sample volume | Active sampling onto sorption tubes; Impinger; Manual by hand |
NIOSH 6011- Chlorine NIOSH 6013 - Hydrogen Sulfide NIOSH 2542 - Mercaptans |
||
| Air - Ambient; Air - Indoor | Sample volume | Sorbent tube |
OSHA 1012 NIOSH 2557 |
|
| Air - Ambient; Air - Indoor; Dust; Inhalable dust; Respirable dust | Sample volume | Active sampling onto sorption tubes; Impinger; Manual by hand |
AS2985 - Respirable dust; AS3640 - Inhalable dust; NIOSH 0500 - Total dust; NIOSH 0600 -Respirable dust; NIOSH 1300 - Ketones I; NIOSH 1501 - Hydrocarbons (aromatic); NIOSH 5040 - Diesel particulate matter (as elemental carbon); NIOSH 7300 - Metals in dust; NIOSH 7600 - Hexavalent chromium; NOSHC 3003 - Asbestos; OSHA 12 - Benzene; OSHA 42 - Diisocyanates (April 2021) |
|
| Sample volume | Active sampling onto sorption tubes; Impinger; Manual by hand | NIOSH 7500 Workplace Silica | ||
| Air - Ambient; Air - Indoor; Inhalable dust; Respirable dust | Sample volume | Active sampling onto sorption tubes | NIOSH 1500 | |
| Sample volume | Active sampling onto sorption tubes | NIOSH 2541 | ||
| Sample volume | Active sampling onto sorption tubes |
NIOSH 7906 NIOSH 7907 NIOSH 7908 |
||
| Sample volume | Active sampling onto sorption tubes; Impinger; Manual by hand |
NIOSH 5521 monomeric Isocyanates NIOSH 5522 Isocyanates NIOSH 5525 Isocyanates total (MAP) |
||
| Air - Ambient; Emissions - Industrial | Not applicable | Siting of air monitoring equipment | BS EN 689 | |
| Emissions - Industrial | Not applicable | Siting of air monitoring equipment |
AS 4323.1 and USEPA Method 1; 1A |
|
| Sample volume | Isokinetic | USEPA OTM 29 - Hydrogen cyanide | ||
| Sample collection - Stack and emissions sampling | Ambient air; Emissions - Industrial | Volatile organic compounds (VOCs) | Evacuated cannister | USEPA Method TO-15 |
| Emissions - Industrial | Lead - Inorganic | Isokinetic | USEPA Method 12 | |
| Cyanide | Impinger | South Coast Air Quality Management District 202-1 | ||
| Halogens; Hydrogen halides | Impinger; Isokinetic | USEPA Method 26; 26A and NSW EPA TM-7; 8 | ||
| Emissions - Industrial; Emissions - Stack | Mercury | Isokinetic; Sorbent tube |
USEPA Method 30B; 324 USEPA Method PS12A; 12B and NSW EPA CEM-12 |
|
| Methanol | Adsorption tube | USEPA Method 308 | ||
| Vinyl chloride | Bags/sorbent tube | USEPA Method 106 | ||
| Methylene diphenyl diisocyanate (MDI, isocyanate MDI, diphenylmethane diisocyanate) | Isokinetic | CTM-031 | ||
| Fluoride - Total | Isokinetic | USEPA Method 13A; 13B; 14 and NSW EPA TM-9; 10 | ||
| Hydrogen sulfide | Impinger |
USEPA Method 11; 15 and NSW EPA TM-5 USEPA Method PS7 and NSW EPA CEM-7 South Coast Air Quality Management District 006-2 |
||
| Ammonia | Impinger |
CTM-027 South Coast Air Quality Management District 207-1 |
||
| Chromium; Chromium VI (hexavalent chromium) | Impinger | CARB 425; NSW EPA OM-3; 4 and USEPA Method 306 and USEPA SW846 Method 0061 | ||
| Emissions - Industrial; Emissions - Stack; Emissions - Stationary sources | Carbon dioxide (CO2); Carbon monoxide; Dinitrogen monoxide (nitrous oxide); Nitrogen dioxide; Nitrogen oxide; Oxygen; Sulfur dioxide | Calculation | BS EN 14181(QAL2 and QAL3) | |
| Emissions - Industrial; Emissions - Stationary sources | Formaldehyde (methanal) | Impinger | CTM-037; CARB 430 and USEPA SW846 method 0011 | |
| Formaldehyde (methanal) | Impinger | NCASi CI/WP-98.01 and USEPA Method 316; 323 | ||
| Polycyclic aromatic hydrocarbons (PAHs) | Impinger | CARB 429 and NSW EPA OM-6 | ||
| Antimony; Arsenic; Barium; Beryllium; Cadmium; Chromium; Cobalt; Copper; Lead; Manganese; Mercury; Nickel; Nitrogen oxide; Phosphorus; Selenium; Silver; Thallium; Zinc | Isokinetic | USEPA Method 29 and NSW EPA TM-12; 13; 14 | ||
| Beryllium | Isokinetic | USEPA Method 103; 104 | ||
| Arsenic | Isokinetic | USEPA Method 108 | ||
| Odour | Flux chamber |
AS 4323.4 |
||
| Emissions - Stack | Particulate matter - PM10; Particulate matter - PM2.5 | Impinger; Isokinetic | NSW EPA OM-5 and USEPA Method 201A | |
| Methylene diphenyl diisocyanate (MDI, isocyanate MDI, diphenylmethane diisocyanate) | Isokinetic | CTM-036A | ||
| Moisture | Impinger |
NSW EPA TM-22 and USEPA method 4 |
||
| Principal organic hazardous compounds (POHCs) | Impinger | USEPA SW846 Method 0030 | ||
| Volatile organic compounds (VOCs) | Impinger | CTM-032 | ||
| Emissions - Stationary sources | Acrylonitrile | Impinger/sorbent tube | CTM-008 | |
| Emissions; Emissions - Industrial; Emissions - Stack | Furans; Polychlorinated dibenzodioxins (polychlorinated dibenzo-p-dioxins); Polychlorinated dibenzofurans | Isokinetic | NSW EPA TM-18; USEPA Method 23; 23A and USEPA SW846 Method 0010 | |
| Per- and polyfluoroalkyl substances (PFAS) | Isokinetic |
In house method W101.043 and OTM 045 |
||
| Ammonia | Isokinetic | ISO 21877 | ||
| Dinitrogen monoxide (nitrous oxide) | Nondispersive infrared (NDIR) | ISO 21258 | ||
| Welding fumes and gases | Carbon dioxide (CO2); Carbon monoxide; Nitrogen dioxide; Nitrogen monoxide; Ozone | Continuous monitoring; Direct reading electrical apparatus; Sorbent tube | AS 3853.2 |
The only data displayed is that deemed relevant and necessary for the clear description of the Activities and Services covered by the Scope of Accreditation (SoA).
Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.
The Product column may also describe an Item or Material.
The Limitations column may also describe the Range.
Accreditation No.
19703
Site No.
22914
Print date
20 Sep 2026