SRG Global Asset Care Pty Ltd

Site

Brisbane Non-Destructive, Mechanical and Chemical Testing Services

Accreditation No.

218

Site No.

390

Date of Accreditation

05 Sep 1962

Address

7 Brisbane Road
Riverview, QLD 4303
Australia

srgglobal.com.au

Contact

Mr Morne Wiid P: +61 (07) 38165500

Availability

Services available to external clients

SRG Global Asset Care Pty Ltd address map

Scope of Accreditation

Print scopes
Brisbane Non-Destructive, Mechanical and Chemical Testing Services

ISO/IEC 17025 (2017)

Infrastructure and Asset Integrity

Service Product Determinant Technique Procedure Limitations
Non-destructive testing (NDT) - Electromagnetic testing Coatings Coating thickness High frequency eddy current; Magnetic induction - Low frequency
Metallic piping; Metallic tubes - Ferromagnetic materials; Metallic tubes - Non-ferromagnetic materials Profiling Multiple frequency eddy current; Remote field eddy current (RFT)
Metallic surfaces Defect detection and characterisation High frequency eddy current; Low frequency eddy current
Non-destructive testing (NDT) - Electromagnetic testing - Specialised - ACFM Metallic surfaces Defect detection and characterisation Not applicable
Non-destructive testing (NDT) - Magnetic particle testing Metallic surfaces - Magnetic Defect detection and characterisation AC magnetic flow; Coil; Current flow
Non-destructive testing (NDT) - Penetrant testing Metallic surfaces Defect detection and characterisation Post emulsifiable; Solvent removable; Water washable
Non-destructive testing (NDT) - Radiographic testing Castings - Cast irons, steel and alloy steels; Castings - Non-ferrous metals and alloys; Composite materials; Welded joints - Aluminium alloys; Welded joints - Clad and overlaid steel; Welded joints - Ferritic materials; Welded joints - Stainless steel, austenitic and duplex materials Defect detection and characterisation Film radiography using VMI 5100 MS and GE CR50 P CT systems
Metallic piping; Metallic tubes - Ferromagnetic materials; Metallic tubes - Non-ferromagnetic materials Material profiling; Wall thickness Film radiography
Non-destructive testing (NDT) - Radiographic testing - Specialised - Computed radiography Castings - Cast irons, steel and alloy steels; Castings - Non-ferrous metals and alloys; Composite materials; Welded joints - Aluminium alloys; Welded joints - Clad and overlaid steel; Welded joints - Ferritic materials; Welded joints - Stainless steel, austenitic and duplex materials Defect detection and characterisation Not applicable using VMI 5100 MS and GE CR50 P CT systems
Metallic piping; Metallic tubes - Ferromagnetic materials; Metallic tubes - Non-ferromagnetic materials Material profiling; Wall thickness Not applicable
Non-destructive testing (NDT) - Ultrasonic testing Bonded metals; Castings - Cast irons, steel and alloy steels; Machine bearings; Rolled or wrought steel products; Welded joints - Aluminium alloys; Welded joints - Ferritic materials; Welded joints - Stainless steel, austenitic and duplex materials Defect detection and characterisation A-scan - Manual
Composite materials; HDPE and other dielectric material joints and components Defect detection and characterisation A-scan - Manual
Metallic piping; Metallic plate; Metallic tubes - Ferromagnetic materials; Metallic tubes - Non-ferromagnetic materials Material loss characterisation; Profiling A-scan - Manual
Material thickness - Spot/grid only A-scan - Manual
Non-destructive testing (NDT) - Ultrasonic testing - Specialised - Phased array (PAUT) Composite materials; HDPE and other dielectric material joints and components Defect detection and characterisation Automatic
Welded joints - Ferritic materials Defect detection and characterisation Manual
Non-destructive testing (NDT) - Visual testing - Prior to initial service Welded joints Defect detection Visual testing

ISO/IEC 17025 (2017)

Manufactured Goods

Service Product Determinant Technique Procedure Limitations
Material performance evaluation of elastomers, plastics and composite products Prepared test specimens Bending properties Not applicable

ASME IX QF 143.2,

ISO 21751, 


Tear resistance Not applicable

ISO 13954; 

ISO 13956

Tensile properties Not applicable

AS 1145.1, 

ISO 13953

0.2 kN to 250 kN

Material performance evaluation of metal products Prepared metallic test specimens Bending properties Not applicable

AS 2505.1, 

ASTM A370, ASTM A1058, ASTM E290, 

ISO 7438, 

Lloyds - Rules for the manufacture, testing and certification of materials Chapter 2 Section 7

Hardness Rockwell - Scale A; Rockwell - Scale B; Rockwell - Scale C

AS 1815.1, 

ASTM A370, ASTM A1058,

Hardness Brinell

AS 1816.1, 

ASTM A370, ASTM A1058, ASTM E10, 

ISO 6506-1

2.45 kN to 29.4 kN 

Tensile properties Longitudinal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse tensile

AS 1391, 

ASTM A370, ASTM A1058, ASTM E8M,

ISO 6892-1, 

For the purpose of determining compliance with:

Lloyds - Rules for the manufacture, testing and certification of materials Chapter 2 Section 2

0.2 kN to 1000 kN

Microhardness Vickers

AS 1817.1, 

ASTM E384

0.245 N to 9.8 N

Hardness Vickers

AS 1817.1, AS 4291.1, 

AS/NZS 4291.2, 

ASTM E92, ASTM F606, 

ISO 898-1, ISO 898-2, ISO 6507-1

9.8 N to 490 N

Impact resistance Charpy - Assessment of fracture appearance; Charpy V-notch - Impact value

AS 1544.2, 

ASTM A370, ASTM A1058, ASTM E23, 

ISO 148-1

from 40°C to -101°C and -196°C

Reinforcing bar and steel prestressing materials for concrete Bending properties; Proof load; Shear strength Not applicable

AS/NZS 4671, 

ISO 15630-1, ISO 15630-2

Threaded fasteners, bolts and nuts Proof load Not applicable

AS 4291.1,

AS/NZS 4291.2, 

ASTM F606, 

ISO 898-1, ISO 898-2

0.2 kN to 1000 kN

Breaking load Not applicable

AS 4291.1, 

ASTM A370, ASTM A1058, ASTM F606, 

ISO 898-1

0.2 kN to 1000 kN

Welded test specimens Impact resistance Charpy - Assessment of fracture appearance; Charpy V-notch - Impact value

AS 1544.2, AS 2205.7.1,

ASTM A370, ASTM A1058, ASTM E23, 

AWS B4.0 clause 7.1,

ISO 9016,

For the purpose of determining compliance with:
AS 1544.2,
DNV Rules for classification of ships/high speed, light craft and naval surface craft - Part 2 Chapter 1 Section 3,Part 2 Chapter 3 Section 5, Part 2 Chapter 4 Section 8,
Lloyds - Rules for the manufacture, testing and certification of materials Chapter 12,

from 40°C to -101°C and -196°C

Macroscopic examination Macroscopic examination

AS/NZS 2205.5.1,

ASME IX Article I QW183,QW184; QW196.1,  

ISO 17639,

For the purpose of determining compliance with:
ANSI/AWS D 1.1 Section 4,
ASME IX Article I QW183,QW184; QW196.1,  

DNV Rules for classification of ships/high speed, light craft and naval surface craft -  Part 2 Chapter 1 Section 3, Part 2 Chapter 3 Section 5, Part 2 Chapter 4 Section 8

Lloyds - Rules for the manufacture, testing and certification of materials Chapter 12

Tensile properties All-weld-metal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse butt tensile; Transverse joggle-butt tensile; Transverse tensile

ANSI/AWS D1.1 Section 4,

AS 1391, 

AS 2205.2.1, AS 2205.2.2, 

ASME IX Article IV QW-462, ASME IX Article IX QB-451,
AWS B4.0 clauses 4.1,4.2, 4.3, 4.4, 4.7,
ISO 4136,
For the purpose of determining compliance with:
ANSI/AWS D1.1 Section 4,

ASME IX Article IV QW-462, ASME IX Article IX QB-451,  

DNV Rules for classification of ships/high speed, light craft and naval surface craft - Part 2 Chapter 1 Section 3, Part 2 Chapter 3 Section 5, Part 2 Chapter 4 Section 8

Lloyds - Rules for the manufacture, testing and certification of materials Chapter 12; 

0.2 kN to 1000 kN 

Hardness Vickers

AS 1817.1; AS 2205.6.1; 

ISO 9015-1; 

for determining compliance with:

AWS B4.0 clauses 8.1,8.2

DNV Rules for classification of ships/high speed, light craft and naval surface craft -  Part 2 Chapter 1 Section 3, Part 2 Chapter 3 Section 5, Part 2 Chapter 4 Section 8,

Lloyds - Rules for the manufacture, testing and certification of materials Chapter 12

9.8 N to 490 N

Bending properties Longitudinal guided bend; Reverse bend; Tongue bend; Transverse free bend; Transverse guided bend; Transverse joggle-butt wrap around bend

ANSI/AWS D1.1 Section 4,

AS/NZS 2205.3.1; AS 2205.3.2; AS/NZS 2205.3.3; AS 2205.3.4,

ASME IX Article IV QW-466,

ASTM E190,

AWS B4.0 clauses 6.1,6.2, 6.3, 6.4, 6.5, 6.6, 6.7, 6.8, 6.9, 6.10,

ISO 5173,

For the purpose of determining compliance with:
ANSI/AWS D1.1 Section 4,
ASME IX Article IV QW-466,

DNV Rules for classification of ships/high speed, light craft and naval surface craft - Part 2 Chapter 1 Section 3, Part 2 Chapter 3 Section 5, Part 2 Chapter 4 Section 8,

Lloyds - Rules for the manufacture, testing and certification of materials Chapter 12,

 including examination of fractures
Hardness Brinell

AS 1816.1, 

ISO 9015-1

2.45 kN to 29.4 kN

Fracture test Macroscopic examination; Visual examination

ANSI/AWS D1.1 Section 4,

AS/NZS 2205.4.1, 

AWS B4.0 clauses 9.2.1, 9.2.4, 9.2.6;

ISO 9017; 

For the purpose of determining compliance with:

ASME IX QW182

DNV Rules for classification of ships/high speed, light craft and naval surface craft - Part 2 Chapter 1 Section 3, Part 2 Chapter 3 Section 5, Part 2 Chapter 4 Section 8

Lloyds - Rules for the manufacture, testing and certification of materials Chapter 12; 

Shear strength Not applicable

AS/NZS 1554.3, 

ASME QW 196.2.1,

AWS B4.0 clause 5.0,

ISO 15630-2,

ISO/IEC 17025 (2017)

Materials

Service Product Determinant Technique Procedure Limitations
Analysis of metals and alloys Aluminium and aluminium alloys; Cast irons; Copper and copper alloys; High alloy steels; Low alloy steels; Manganese steels; Nickel and nickel alloys; Plain carbon steels; Stainless steels; Tool steels Aluminium; Antimony; Boron; Carbon; Chromium; Cobalt; Copper; Iron; Lead; Magnesium; Manganese; Molybdenum; Nickel; Niobium; Phosphorus; Silicon; Sulfur; Tin; Titanium; Tungsten; Vanadium; Zinc; Zirconium Atomic emission spectroscopy (AES) - Arc spark In-house ENG.CT.001

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.