Calibration & Quality Solutions

Site

Calibration Laboratory

Accreditation No.

21634

Site No.

26056

Date of Accreditation

21 Jan 2026

Address

7/8 Oxley Street
North Lakes, QLD 4509
Australia

cqs.net.au

Contact

Mr Tarin Glazier P: +61 0406615086

Availability

Services available to external clients

Calibration & Quality Solutions address map

Scope of Accreditation

Print scopes
Calibration Laboratory

ISO/IEC 17025 (2017)

Calibration

  • The uncertainty of measurement is reported as an expanded uncertainty having a level of confidence of 95% unless stated otherwise
Service Product Determinant Technique Procedure Limitations
Dimensional metrology - Engineering equipment and precision instruments Dial gauges; Electronic length gauges Length measurements Direct measurement against a reference standard Including compliance with AS 2103-1978

Capability

including on-site calibrations.
With Calibration and Measurement Capability of-
1.9 µm from 5 µm to 50 mm
 9.4 µm above 50 mm to 100 mm
Dimensional metrology - Engineering equipment and precision instruments Electronic calipers; Vernier calipers Length measurements Direct measurement against a reference standard Including compliance with JIS B 7507

Capability

with Calibration and Measurement Capability of -
19 µm from 25 mm to 300 mm
Dimensional metrology - Engineering equipment and precision instruments Extensometers Length measurements Direct measurement against a reference standard Including compliance with AS 1545

Capability

Including onsite calibrations
 With Calibration and Measurement Capability of-
(1.2 + 0.5L) μm where L is the extension in mm from 0.05 mm up to 25 mm
Force metrology - Force measuring and testing equipment Compression and universal machines in compression; Hydraulic rams and jacks; Load cells; Tension and universal machines in tension Force in compression; Force in tension Comparison measurement with reference load cell; Gravimetric measurement with reference mass AS 2193

Capability

Including on-site calibrations.
With Calibration and Measurement Capability of -
0.18% of reading for Class AA 0.01 kN to 10 kN in Tension
0.25% of reading for Class A 0.01 kN to 10 kN in Tension
0.18% of reading for Class AA 0.01 kN to 1 KN in Compression
0.18% of reading for Class AA 1.618 kN to 400 kN in Compression
0.25% of reading for Class A 0.01 kN to 2 MN in Compression
Mass - Determination of mass and calibration of weighing devices Industrial weighing devices; Precision laboratory balances Mass Gravimetric measurement against reference mass NMI Monograph 4

Capability

including on site calibrations
with Calibration and Measurement Capability of -
Precision laboratory balances
120 μg above 1 g to 20 g
170 μg above 20 g to 100 g
280 μg above 100 g to 200 g
420 μg above 200 g to 300 g
Industrial weighing devices 
1.7 mg above 300 g to 1 kg
12 mg above 1 kg to 5 kg
18 mg above 5 kg to 10 kg
110 mg above 10 kg to 35 kg
Pressure metrology - Pressure and vacuum measuring equipment Digital pressure gauges; Mechanical pressure gauges Gauge pressure Comparison with reference instrument MSA Test Method 1
MSA Test Method 2

Capability

including on-site calibrations.
With Calibration and Measurement Capability of -
0.38% of reading from 50 kPa to 7000 kPa

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.