Home / Victorian Laboratory

Trescal (Australia) Pty Ltd

Site

Victorian Laboratory

Accreditation No.

19397

Site No.

18287

Date of Accreditation

16 Aug 2010

Address

Unit 5, 170-180 Rooks Rd
Vermont, VIC 3133
Australia

trescal.com.au

Contact

Mr Anthony Wynn P: +61 0476850542

Availability

Services available to external clients

Scope of Accreditation

Print scopes

Victorian Laboratory

ISO/IEC 17025 (2017)

Calibration

The uncertainty of measurement is reported as an expanded uncertainty having a level of confidence of 95% unless stated otherwise

Service	Product	Determinant	Technique	Procedure	Limitations
DC and low frequency electrical metrology - Electrical instrument calibrators	Instrument calibrators	AC current; AC voltage; DC current; DC voltage; Resistance	Direct measurement against a reference standard
Capability with Calibration and Measurement Capability of - D.C. voltage 3.9 µV/V + 380 nV from 0 to 200 mV 3.3 µV/V + 820 nV from 200 mV to 2 V 3.5 µV/V + 4. 7µV from 2 V to 20 V 5.3 µV/V + 61 µV from 20 V to 200 V 5.2 µV/V + 740 µV from 200 V to 1000 V A.C. voltage From 2.0 mV to 200 mV 130 µV/V + 11 µV from 10 Hz to 40 Hz 140 µV/V + 5.7µV from 40 Hz to 100 Hz 130 µV/V + 4.8 µV from 100 Hz to 2 kHz 150 µV/V + 5.9 µV from 2 kHz to 10 kHz 320 µV/V + 9 µV from 10 kHz to 30 kHz 870 µV/V + 20 µV from 30 kHz to 100 kHz From 200 mV to 2 V 140 µV/V + 35 µV from 10 Hz to 40 Hz 120 µV/V + 36µV from 40 Hz to 100 Hz 120 µV/V + 20 µV from 100 Hz to 2 kHz 150 µV/V + 22 µV from 2 kHz to 10 kHz 230 µV/V + 40 µV from 10 kHz to 30 kHz 530µV/V + 190 µV from 30 kHz to 100 kHz 2.4mV/V + 1.9 mV from 100 kHz to 300 kHz 8.6 mV/V + 19 mV from 300 kHz to 1 MHz From 2 V to 20 V 96 µV/V + 410 µV from 10 Hz to 40 Hz 81 µV/V + 300 µV from 40 Hz to 100 Hz 67 µV/V + 280 µV from 100 Hz to 2 kHz 110 µV/V + 260 µV from 2 kHz to 10 kHz 200 µV/V + 430 µV from 10 kHz to 30 kHz 510 µV/V + 1.9 mV from 30 kHz to 100 kHz 2.4 mV/V + 19 mV from 100 kHz to 300 kHz 8.5 mV/V + 190 mV from 300 kHz to 1 MHz From 20 V to 200 V 94 µV/V + 4.5 mV from 10 Hz to 40 Hz 78 µV/V + 3.7 mV from 40 Hz to 100 Hz 65 µV/V + 3.2 mV from 100 Hz to 2 kHz 98 µV/V + 3.5 mV from 2 kHz to 10 kHz 200 µV/V + 4.8 mV from 10 kHz to 30 kHz 510 µV/V + 19 mV from 30 kHz to 100 kHz 2.4 mV/V + 190 mV from 100 kHz to 300 kHz From 200 V to 1 kV 110 µV/V + 31 mV from 10 Hz to 40 Hz 150 µV/V + 23 mV from 40 Hz to 10 kHz D.C. current 12 µA/A + 0.55 nA from 10 µA to 200 µA 13 µA/A + 4.8 nA from 200 µA to 2 mA 14 µA/A + 44 nA from 2 mA to 20 mA 45 µA/A + 1 µA from 20 mA to 200 mA 180 µA/A + 15 µA from 200 mA to 2 A 390 µA/A + 690 µA from 2 A to 20 A A.C. current From 100 μA to 200 µA 480 µA/A + 21 nA from 10 Hz to 10 kHz From 200 µA to 2 mA 280 µA/A + 210 nA from 10 Hz to 10 kHz From 2 mA to 20 mA 290 µA/A + 2.1 µA from 10 Hz to 10 kHz From 20 mA to 200 mA 270 µA/A + 21 µA from 10 Hz to 10 kHz From 200 mA to 2 A 560 µA/A + 210 µA from 10 Hz to 2 kHz 560 µA/A + 500 µA from 2 kHz to 10 kHz From 2 A to 20 A 700 µA/A + 2.3 mA from 10 Hz to 2 kHz 1.9 mA/A + 4.3 mA from 2 kHz to 5 kHz Resistance 2.1 µΩ/Ω + 60 µΩ from 0 Ω up to 2 Ω 7.6 µΩ/Ω + 60 µΩ from 2 Ω to 20 Ω 7.3 µΩ/Ω + 170 µΩ from 20 Ω to 200 Ω 7.5 µΩ/Ω + 1.2 mΩ from 200 Ω to 2000 Ω 7.5 µΩ/Ω + 10 mΩ from 2000 Ω to 20 kΩ 7.3 µΩ/Ω + 160 mΩ from 20 kΩ to 200 kΩ 8.7 µΩ/Ω + 3.1 Ω from 200 kΩ to 2 MΩ 18 µΩ/Ω + 140 Ω from 2 MΩ to 20 MΩ 130 µΩ/Ω + 9.8 kΩ from 20 MΩ to 200 MΩ 1.4 mΩ/Ω + 540 kΩ from 200 MΩ to 1GΩ
DC and low frequency electrical metrology - Electrical measurement and test equipment	Ammeters; Digital multimeters (DMM); Ohm meters; Voltmeters	AC current; AC voltage; DC current; DC voltage; Resistance	Direct measurement against a reference standard
Capability with Calibration and Measurement Capability of - D.C. voltage 5.5 µV/V + 720 nV from 25 μV to 22 mV 6.9 µV/V + 690 nV from 22 mV to 220 mV 6.2 µV/V + 980 nV from 220 mV to 2.2 V 6.3 µV/V + 5.5 µV from 2.2 V to 22 V 7 µV/V + 78 µV from 22 V to 220 V 8.7 µV/V + 440 µV from 220 V to 1000 V A.C. voltage From 220 μV to 2.2 mV 520 µV/V + 4 µV from 10 Hz to 20 Hz 310 µV/V + 3.9 µV from 20 Hz to 40 Hz 240 µV/V + 3.9 µV from 40 Hz to 20 kHz 64 0µV/V + 3.8 µV from 20 kHz to 50 kHz 920 µV/V + 6.2 µV from 50 kHz to 100 kHz From 2.2 mV to 22 mV 470 µV/V + 4.9 µV from 10 Hz to 20 Hz 200 µV/V + 4.9 µV from 20 Hz to 40 Hz 120 µV/V + 4.9 µV from 40 Hz to 20 kHz 340 µV/V + 4.9 µV from 20 kHz to 50 kHz 750 µV/V + 6.6 µV from 50 kHz to 100 kHz From 22 mV to 220 mV 480 µV/V + 13 µV from 10 Hz to 20 Hz 210 µV/V + 7.5 µV from 20 Hz to 40 Hz 130 µV/V + 7.2 µV from 40 Hz to 20 kHz 300 µV/V + 7.8 µV from 20 kHz to 50 kHz 710µV/V + 24µV from 50 kHz to 100 kHz 910µV/V + 23µV from 100 kHz to 300 kHz From 220 mV to 2.2 V 470 µV/V + 78 µV from 10 Hz to 20 Hz 150 µV/V + 24 µV from 20 Hz to 40 Hz 71 µV/V + 5.5 µV from 40 Hz to 20 kHz 120 µV/V + 16 µV from 20 kHz to 50 kHz 220 µV/V + 62 µV from 50 kHz to 100 kHz 390 µV/V + 120 µV from 100 kHz to 300 kHz 990 µV/V + 300 µV from 300 kHz to 500 kHz 2.1 mV/V + 730 µV from 500 kHz to 1 MHz From 2.2 V to 22 V 470 µV/V + 770µV from 10 Hz to 20 Hz 150 µV/V + 240 µV from 20 Hz to 40 Hz 71 µV/V + 53 µV from 40 Hz to 20 kHz 120 µV/V + 160 µV from 20 kHz to 50 kHz 220 µV/V + 310 µV from 50 kHz to 100 kHz 470 µV/V + 1.3 mV from 100 kHz to 300 kHz 1.1 mV/V + 3.9 mV from 300 kHz to 500 kHz 2.4 mV/V + 6.9 mV from 500 kHz to 1 MHz From 22 V to 220 V 470 µV/V + 7.8 uV/V from 10 Hz to 20 Hz 150 µV/V + 2.4 mV from 20 Hz to 40 Hz 72 µV/V + 830 µV from 40 Hz to 20 kHz 200 µV/V + 3.1 mV from 20 kHz to 50 kHz 470 µV/V + 7.7 mV from 50 kHz to 100 kHz From 220 V to 1 kV 77 µV/V + 2.7 mV from 50 Hz to 1 kHz From 220 V to 330 V 150 µV/V + 3.9 mV at 45 Hz From 330 V to 1000 V 240 µV/V + 7.5 mV at 45 Hz D.C. current 47 µA/A + 7.7 nA from 10 μA to 220 μA 47 µA/A + 7.7 nA from 220 μA to 2.2 mA 47 µA/A + 77 nA from 2.2 mA to 22 mA 55 µA/A + 770 nA from 22 mA to 220 mA 77µA/A + 23 µA from 220 mA to 2.2 A 390 µA/A + 400 µA from 2.2 A to 11 A 800 µA/A + 370 µA from 11 A to 20 A A.C. current From 100 μA to 220 µA 630 µA/A + 23 nA from 10 Hz to 20 Hz 330 µA/A + 19 nA from 20 Hz to 40 Hz 140 µA/A + 15 nA from 40 Hz to 1 kHz 570 µA/A + 36 nA from 1 kHz to 5 kHz 1.5 mA/A + 74 nA from 5 kHz to 10 kHz From 220 µA to 2.2 mA 620 µA/A + 39 nA from 10 Hz to 20 Hz 330 µA/A + 32 nA from 20 Hz to 40 Hz 130 µA/A + 31 nA from 40 Hz to 1 kHz 550 µA/A + 390 nA from 1 kHz to 5 kHz 1.4 mA/A + 770 nA from 5 kHz to 10 kHz From 2.2 mA to 22 mA 620 µA/A + 390 nA from 10 Hz to 20 Hz 330 µA/A + 310 nA from 20 Hz to 40 Hz 130 µA/A + 310 nA from 40 Hz to 1 kHz 550 µA/A + 3.9 µA from 1 kHz to 5 kHz 1.4 mA/A + 7.7 µA from 5 kHz to 10 kHz From 22 mA to 220 mA 620 µA/A + 4 µA from 10 Hz to 20 Hz 330 µA/A + 3.2 µA from 20 Hz to 40 Hz 150 µA/A + 3 µA from 40 Hz to 1 kHz 550 µA/A + 39 µA from 1 kHz to 5 kHz 1.4 mA/A + 77 µA from 5 kHz to 10 kHz From 220 mA to 2.2 A 590µA/A + 30µA from 40 Hz to 1 kHz 690µA/A + 72µA from 1 kHz to 5 kHz 7.9mA/A + 130µA from 5 kHz to 10 kHz From 2.2 A to 11 A 520 µA/A + 1.5 mA from 45 Hz to 100 Hz 810 µA/A + 1.5 mA from 100 Hz to 1 kHz 24 mA/A + 1.6 mA from 1 kHz to 5 kHz From 11 A to 20 A 960 µA/A + 3.8 mA from 45 Hz to 100 Hz 1.2 mA/A + 3.8 mA from 100 Hz to 1 kHz 24 mA/A + 3.9 mA from 1 kHz to 5 kHz Resistance Within the ranges 33 µΩ/Ω + 780 µΩ 0 Ω to 11 Ω 24 µΩ/Ω + 1.2 mΩ from 11 Ω to 33 Ω 23 µΩ/Ω + 1.1 mΩ from 33 Ω to 110 Ω 24 µΩ/Ω + 1.4 mΩ from 110 Ω to 330 Ω 22 µΩ/Ω + 1.9 mΩ from 330 Ω to 1.1 kΩ 24 µΩ/Ω + 15 mΩ from 1.1 kΩ to 3.3 kΩ 23 µΩ/Ω + 19 mΩ from 3.3 kΩ to 11 kΩ 23 µΩ/Ω + 160 mΩ from 11 kΩ to 33 kΩ 23 µΩ/Ω + 160 mΩ from 33 kΩ to 110 kΩ 26 µΩ/Ω + 1.6 Ω from 110 kΩ to 330 kΩ 26 µΩ/Ω + 1.7 Ω from 330 kΩ to 1.1 MΩ 49 µΩ/Ω + 22 Ω from 1.1 MΩ to 3.3 MΩ 110 µΩ/Ω + 37 Ω from 3.3 MΩ to 11 MΩ 210 µΩ/Ω + 1.9 kΩ from 11 MΩ to 33 MΩ 400 µΩ/Ω + 2.6 kΩ from 33 MΩ t0 110 MΩ 2.4 mΩ/Ω + 73 kΩ from 110 MΩ to 330 MΩ 12 mΩ/Ω + 370 kΩ from 330 MΩ to 1090 MΩ With fixed values 87 µΩ/Ω at 1 Ω 27 µΩ/Ω at 10 Ω 16 µΩ/Ω at 100 Ω 12 µΩ/Ω at 1 kΩ 11 µΩ/Ω at 10 kΩ 13 µΩ/Ω at 100 kΩ 18 µΩ/Ω at 1 MΩ 38 µΩ/Ω at 10 MΩ 108 µΩ/Ω at 100 MΩ
Dimensional metrology - Engineering equipment and precision instruments	Bevel protractors	Angle (arc)	Comparison with a reference standard	Including compliance with AS B139
Capability with Calibration and Measurement Capability of - 3.6 minutes of arc from 150 mm to 300 mm
	Bore gauges	Length measurements	Comparison with a reference standard
Capability with Calibration and Measurement Capability of - 2.5 μm from 2 mm to 50 mm 3.5 μm above 50 mm to 200 mm
	Depth and height micrometers	Length measurements	Comparison with a reference standard
Capability with Calibration and Measurement Capability of - 2 μm from 1 mm to 125 mm (1.1+L/180) μm above 125 mm to 600 mm where L is the indicated depth in mm
	Dial gauges	Length measurements	Comparison with a reference standard	Dial gauges and other displacement measuring devices
Capability with Calibration and Measurement Capability of - Dial Gauges (0.8 + 0.032L) μm where L is the range in mm from 1 mm to 100 mm Digital Indicators (0.8 + 0.013L) μm where L is the range in mm from 1 mm to 100 mm Dial Test Indicators (0.8 + 100R) μm where R is the resolution in mm
	Dial gauges; Thickness gauges	Length measurements	Comparison with a reference standard	Including compliance with AS 2103
Capability with Calibration and Measurement Capability of - (0.8 + 0.032L) μm from 1 mm to 100 mm where L is the range in mm
	Eccentric mandrels	Length measurements	Comparison with a reference standard
Capability with Calibration and Measurement Capability of - 0.21 μm from 1 to 10 μm eccentricity 0.43 μm from 10 to 30 μm eccentricity
	External micrometers	Length measurements	Comparison with a reference standard	Including compliance with AS 2102
Capability with Calibration and Measurement Capability of - 1.8 μm up to 25 mm 2.6 μm above 25 mm to 100 mm (1.8+0.01L) μm where L is the length in mm above 100 mm to 1200 mm
	Feeler gauges	Length measurements	Comparison with a reference standard	Including compliance with 1655
Capability with Calibration and Measurement Capability of - (6L + 0.7) μm from 0.04 mm to 1 mm where L is thickness in mm
	Internal micrometers	Length measurements	Comparison with a reference standard	Including compliance with AS 2101
Capability with Calibration and Measurement Capability of - 2.5 μm from 25 mm to 150 mm 4 μm above 150 mm to 300 mm (1.5 + 0.008L) μm above 300 mm to 900 mm where L is the length in mm
	Micrometer heads	Length measurements	Comparison with a reference standard	Including compliance with AS 2328
Capability with Calibration and Measurement Capability of - (0.4+0.6R) μm where R is the resolution in μm
	Micrometer setting gauges	Length measurements	Comparison with a reference standard		Up to 1200 mm
Capability with Calibration and Measurement Capability of - (1 + 0.007L) μm up to 1200 mm where L is the length in mm
	Precision spirit levels	Angle (arc)	Comparison with a reference standard	Including compliance with AS 2054
Capability with Calibration and Measurement Capability of - 2 seconds of arc limited to a sensitivity of 10 seconds of arc
	Squares	Length measurements	Comparison with a reference standard	Including compliance with BS 939
Capability with Calibration and Measurement Capability of - 2 μm from 100 mm to 200 mm 2.6 μm above 200 mm to 450 mm 4.3 μm above 450 mm to 600 mm
	Steel rulers and measuring tapes	Length measurements	Comparison with a reference standard	Including compliance to AS 1290.4 (only to retractable steel pocket rules)
Capability with Calibration and Measurement Capability of - Steel rules 5.4 μm or (3.5+0.007L) μm (whichever is greater) up to 2 m where L is the length in mm Retractable steel pocket rules 0.47 mm from 0.5 mm to 10 m
	Straight edges	Length measurements	Comparison with a reference standard	Including compliance with AS 1003 and AS B72
Capability with Calibration and Measurement Capability of - 2 μm from 50 mm to 300 mm 3 μm above 300 to 500 mm 5 μm above 500 to 1000 mm 8 μm above 1000 to 1500 mm
	Surface plates	Flatness	Comparison with a reference standard	Including compliance with AS 1004	Excluding clause 3.4 rigidity
Capability with Calibration and Measurement Capability of - (3.6 L + 2) μm where L is length of longest side of the surface/table
	Vernier calipers	Length measurements	Comparison with a reference standard	Including compliance with AS 1984, BS 887 and JIS 7507
Capability with Calibration and Measurement Capability of - (10 + 0.025L) μm up to 1.5 m for indication errors where L is the scale value in mm
	Vernier height and depth gauges	Length measurements	Comparison with a reference standard	Including compliance with AS B138
Capability with Calibration and Measurement Capability of - Height gauges 2.5 μm from 10 mm to 300 mm (6 + 0.006L) μm from 300 mm to 1000 mm where L is the indicated height in mm Depth gauges 6 μm from 1 to 100 mm (5.5 + 0.006L) μm above 100 mm to 1000 mm where L is the indicated depth in mm
Dimensional metrology - Engineering equipment and precision instrumentsincluding on site calibrations	Extensometers	Length measurements	Comparison with a reference standard	in laboratory and in situ Including compliance to AS 1545
Capability including on site calibrations with Calibration and Measurement Capability of - (0.89 + 0.79L) μm from 0.01 mm to 250 mm where L is the indicated extension in mm
Dimensional metrology - Jigs, fixtures, cutting tools, machine tools, gears, splines and serrations	Components and QC standards; Crimp tools; Cutting tools; Jigs and fixtures	Length measurements	Comparison with a reference standard by differential measurement
Capability with Calibration and Measurement Capability of - (1 + 0.007 L) μm up to 1200 mm where L is the length in mm
Dimensional metrology - Length and angle standards	Dial gauge calibrators; Extensometer calibrators	Length measurements	Comparison with a reference standard
Capability with Calibration and Measurement Capability of - (0.4+0.6R) μm where R is the resolution in μm
	Precision graticules; Precision linear scales	Length measurements; Microscope graticules	Comparison with a reference standard
Capability with Calibration and Measurement Capability of - Precision graticules 1.5 μm with a minimum scale separation of 0.01 mm Precision linear scales 2 μm up to 500 mm
Dimensional metrology - Limit gauges and reference standards	Indicator gauges; Radius gauges	Radius	Comparison with a reference standard
Capability with Calibration and Measurement Capability of - (8+1.1R) μm where R is the radius in mm
	Plain plug gauges; Plain ring gauges	Diameter	Comparison with a reference standard
Capability with Calibration and Measurement Capability of - Plain plug gauges 1 μm from 2 mm to 50 mm 3 μm above 50 mm to 250 mm Plain ring gauges 1 μm from 2 mm to 50 mm 3 μm above 50 mm to 250 mm
Force metrology - Force measuring and testing equipment	Paper product testing equipment	Force in compression; Force in tension	Comparison measurement with reference load cell	Paper Burst (AS/NZS 1301.403s) Densometer (AS 1301.420s) Board Burst (AS/NZS 1301.438s) Tensile/fracture toughness (AS 1301.448s) Crush testing (AS/NZS 1301.449s) STFI compression strength (AS 1301.450rp) Box compression (AS 1301.800s) Huygen internal bond testers Taber stiffness (AS 1301.431rp)	Huygen internal bond testers 100 J/m² to 350 J/m² Taber stiffness 65 Taber units to 1000 Taber units
Capability with Calibration and Measurement Capability of - Huygen internal bond testers 1.4 J/m² from 100 J/m² to 350 J/m² Taber stiffness 1.1% of range from 65 to 1000 Taber units
Force metrology - Force measuring and testing equipmentincluding on site calibrations	Aircraft weighing kits; Hydraulic rams and jacks; Load cells; Load measuring rings	Force in compression; Force in tension	Comparison measurement with reference load cell		In tension up to 1000 kN and compression up to 500 kN to class AA including compliance to AS 2193 In tension up to 3.3 MN and in compression up to 20 MN to class A including compliance to AS 2193
Capability Including on site calibrations with Calibration and Measurement Capability of - 0.17% reading from 0.01 N to 500 kN in compression 0.17% reading from 0.01 N to 1000 kN in tension 0.25% reading above 500 kN to 20 MN in compression 0.25% reading above 1000 kN to 3.3 MN in tension
	Compression and universal machines in compression	Force in compression	Comparison measurement with reference load cell		Up to 500 kN to class AA and up to 20 MN to class A of the requirements of AS 2193 and including testing to ISO 7500-1 and ASTM E4 Verification of compression testing machines for concrete including self-alignment and restraint on tilt tests for compliance with BS 1881 Part 115
Capability Including on site calibrations with Calibration and Measurement Capability of - 0.17% reading from 0.01 N to 500 kN 0.25% reading above 500 kN to 20 MN
	Elastic force measuring devices	Force in compression; Force in tension	Comparison measurement with reference load cell	Calibration of devices such as load measuring rings for soil testing machines, electronic load cells and hydrostatic weighing units including those in batching plants and aircraft weighing kits including compliance to class AA including compliance to AS 2193 including compliance to class A including compliance to AS 2193	0.01 N to 20 MN in compression 0.01 N to 3.3 MN. in tension in tension up to 1000 kN and compression up to 500 kN to class AA including compliance to AS 2193 in tension up to 3.3 MN and in compression up to 20 MN to class A including compliance to AS 2193
Capability Including on site calibrations with Calibration and Measurement Capability of - 0.17% reading from 0.01 N to 500 kN in compression 0.17% reading from 0.01 N to 1000 kN in tension 0.25% reading above 500 kN to 20 MN in compression 0.25% reading above 1000 kN to 3.3 MN in tension
	Tension and universal machines in tension	Force in tension	Comparison measurement with reference load cell		Up to 500 kN to class AA and up to 3.3 MN to class A including compliance to AS 2193 and including testing to ISO 7500-1 and ASTM E4
Capability Including on site calibrations with Calibration and Measurement Capability of - 0.17% reading from 0.01 N to 1000 kN 0.25% reading above 1000 kN to 3.3 MN
Force metrology - Force standards	Force calibrating equipment; Force standards and load cells used as force standards	Force in compression; Force in tension	Comparison measurement with reference load cell; Gravimetric measurement with reference mass	Including compliance with AS 2193; ISO 376
Capability with Calibration and Measurement Capability of - Force calibrating equipment; Force standards and load cells used as force standards used in tension Calibration at forces up to 500 kN to Class 1 requirements of AS2193-Section 4 with calibration and measurement uncertainty of 0.03% of reading from 0.01N to 500 kN Force calibrating equipment; Force standards and load cells used as force standards used in compression Calibration at forces up to 2000 kN to Class 2 requirements of AS 2193 Section 4 with calibration and measurement uncertainty of 0.03% of reading up to 500 kN with calibration and measurement uncertainty of 0.05% of reading from 500kN to 2000 kN
		Force in compression; Force in tension	Comparison measurement with reference load cell	Including determination of class 0 requirements of AS 2193 and compliance with ISO 379 and ASTM E74	9.8 N to 10 kN
Capability with Calibration and Measurement Capability of - 0.03% of reading or 0.14 N (whichever is greater)
Force metrology - Hardness standards and equipment	Hardness standards	Brinell hardness; Rockwell hardness; Vickers hardness	Comparison with a reference standard	Hardness of metal products Brinell hardness tests Rockwell hardness tests Vickers hardness tests	Hardness of metal products Brinell hardness tests in the range 9.8 to 29.4 kN Rockwell hardness tests using A, B, C, E, F, G, H, K, N, T scales Vickers hardness tests in the range 9.8 to 980 N
	Penetrometers and penetration cones	Penetration resistance	Direct length measurement	AS 1289.6.3.2
	Rubber bases	Rubber hardness	Comparison with a reference standard		25 IRHD to 97 IRHD
Capability with Calibration and Measurement Capability of - 0.7 IRHD
		Rubber hardness	Comparison with a reference standard
Capability Rubber hardness tests (IRHD) on rubber products including liquid limit device bases Timing tests on asphalt testing machines calibration to AS 1289.6.8.1, AS 2891.12.1 and AS 2891.13.1 Calibration of frequency of vibrating tables to AS 1289.5.5.1 and AS 2350.12
Force metrology - Hardness standards and equipmentincluding on site calibrations	Brinell hardness machines; Portable Brinell measuring microscopes	Brinell hardness	Comparison with a reference standard
	Charpy impact machines	Charpy impact	Comparison with a reference standard; Direct force and length measurement		0.5 J to 600 J
Capability Including on site calibrations with Calibration and Measurement Capability of - 0.2% reading from 0.5 J to 600 J
	Dead weight micro-hardness rubber testers; Dead weight rubber hardness testers; Rubber hardness meters (durometers)	Rubber hardness	Comparison with a reference standard		From 10 IRHD to 99.5 IRHD
Capability Including on site calibrations with Calibration and Measurement Capability of - 1% of reading in IRHD from 10 IRHD to 99.5 IRHD
	Indenters; Rockwell hardness machines; Rockwell superficial hardness machines	Rockwell hardness	Comparison with a reference standard
	Indenters; Vickers hardness machines; Vickers low-load hardness machines; Vickers micro-hardness machines	Vickers hardness	Comparison with a reference standard
	Izod impact machines	Izod impact	Comparison with a reference standard; Direct force and length measurement		2 J to 170 J
Capability Including on site calibrations with Calibration and Measurement Capability of - 0.2% reading from 2 J to 170 J
Mass - Determination of mass and calibration of weighing devices	Mass standards	Mass	Gravimetric measurement against reference mass		From 10 mg to 30 kg
Capability with Calibration and Measurement Capability of - 0.03 mg from 10 mg to 5 g 0.04 mg above 5 g to 10 g 0.05 mg above 10 g to 20 g 0.06 mg above 20 g to 50 g 0.15 mg above 50 g to 100 g 0.20 mg above 100 g to 200 g 3.5 mg above 200 g to 1 kg 4 mg above 1 kg to 2 kg 10 mg above 2 kg to 5 kg 25 mg above 5 kg to 10 kg 50 mg above 10 kg to 20 kg 130 mg above 20 kg to 30 kg
Mass - Determination of mass and calibration of weighing devicesincluding on site calibrations	Industrial weighing devices; Laboratory weighing devices; Precision laboratory balances	Mass	Gravimetric measurement against reference mass
Capability with Calibration and Measurement Capability of - Including on site calibrations in the range from 0.01 g and up to 1000 kg 2 in 10⁶ or 20 μg (whichever is greater) ) in the range from 0.01g and up to 250 g 3 in 10⁶ in the range from 250 g and up to 500 g 3 mg in the range from 500 g and up to 1.1 kg 2 in 10⁶ or 4 mg (whichever is greater) in the range from 1.1 kg and up to 21 kg 4 in 10⁶ in the range from 21 kg and up to 31 kg 5 in 10⁶ in the range from 31 kg and up to 41 kg 5 in 10⁵ in the range from 41 kg and up to 1000 kg
Pressure metrology - Pressure and vacuum measuring equipmentincluding on site calibrations	Pressure control devices; Pressure gauges; Pressure recorders; Pressure transducers; Vacuum gauges	Gauge pressure	Comparison with dead weight tester; Comparison with reference instrument	Including test gauges as defined in AS 1349	-100 kPa to 120 MPa
Capability with Calibration and Measurement Capability of - 0.05% of reading or 0.05 kPa (whichever is greater) from 100 kPa to 120 MPa 0.23% of reading from - 100 kPa to - 20 kPa and 20 kPa to 100 kPa 0.46% of reading or 80 Pa (whichever is greater) from - 20 kPa to 20 kPa For on site calibrations with Calibration and Measurement Capability of - 0.23% of reading from -100 kPa to - 20 kPa and 20 kPa to 120 MPa 0.46% of reading or 80 Pa (whichever is greater) from - 20 kPa to 20 kPa
Temperature metrology - Ancillary temperature measuring equipment	Digital voltmeters (DVM) and digital multimeters (DMM); Multi-channel thermocouple data recorders; Process calibrators	Resistance to temperature conversion; Volt to temperature conversion	Direct measurement by electrical input
Capability with Calibration and Measurement Capability of - 0.3 °C from -200 °C to 1370 °C by electrical simulation (ACJC off) 0.7 °C from -200 °C to 1370 °C by electrical simulation (ACJC on)
Temperature metrology - Humidity measuring equipment	Hygrometers; Relative humidity sensors	Relative humidity (RH)	Comparison with a reference standard
Capability with Calibration and Measurement Capability of - 1.7% RH from 10°C to 19°C and above 23°C to 60°C from 10 % RH to 90 % RH 1.5% RH above 19°C to 23°C from 10 % RH to 90 % RH
Temperature metrology - Non-contact temperature measuring equipment	Radiation pyrometers	Temperature	Comparison with a reference standard
Capability with Calibration and Measurement Capability of - 1.6 °C + 0.8% of T (where T is Temperature in °C ) when designed for 0.95 emissivity for IR 7-14 μm spectral response for pyrometers from 0 °C to 450 °C
Temperature metrology - Temperature measuring equipment	Base metal thermocouples	Temperature	Measurement against reference standard
Capability with Calibration and Measurement Capability of - 0.5 °C + 0.1%T from -80 °C to 0 °C 0.5 °C above 0 °C to 420 °C
	Bimetallic systems	Temperature	Measurement against reference standard
Capability with Calibration and Measurement Capability of - 0.5 °C from 0 °C to 250 °C
	Liquid in glass (LIG) thermometers	Temperature	Measurement against reference standard
Capability with Calibration and Measurement Capability of - 1/5 of one scale division or 0.05 °C (whichever is the larger) at ice point 0.24 °C from -30 °C to 100 °C 0.3 °C above 100 °C to 200 °C (partial immersion thermometers only across the measurement range)
	Surface probes	Temperature	Measurement against reference standard
Capability with Calibration and Measurement Capability of - 0.5 °C + 0.4%T from 25 °C to 350 °C
Temperature metrology - Temperature measuring equipmentincluding on site calibrations	Digital temperature measuring systems; Temperature loggers - Single and multi-channel	Temperature	Measurement against reference standard
Capability Including on site calibrations with Calibration and Measurement Capability of - 0.2 °C from -80 °C to 200 °C 0.5 °C above 200 °C to 420 °C 2 °C above 420 °C to 1000 °C 0.5 °C from 5 °C to 80 °C for thermohygrometers
Temperature metrology - Verification of controlled enclosures	Environmental chambers - Humidity	Humidity	By temperature and humidity measurement
Capability Including on site calibrations with Calibration and Measurement Capability of - 1.7% RH from 10 ºC to 60 ºC and in the range 10% to 90% RH
Temperature metrology - Verification of controlled enclosuresincluding on site calibrations	Autoclaves and sterilising ovens; Environmental chambers - Temperature; Freezers; Furnaces; Incubators; Ovens	Spatial uniformity; Temperature	Direct temperature measurement
Capability Including on site calibrations with Calibration and Measurement Capability of - Ovens and Furnaces 1.0 °C from 0 °C to 420 °C 2 °C above 420 °C to 1100 °C Incubators 0.5 °C from ambient to 100 °C Fridges 1.0 °C from 0 °C to 20 °C Autoclaves and sterilising ovens 1.0 °C from ambient to 200 °C Industrial freezers 1.0 °C from -80 °C to 0 °C Environmental Chambers (Temperature) 0.6 º C from -80 °C to 200 ºC Efficiency of drying ovens including compliance to AS 1289.0 clause 4.2.3 Rate of loading of drying ovens including compliance to AS 1289.0 clause 4.2.4 with Calibration and Measurement Capability of 0.5 g/h
Torque - Torque measuring and testing equipmentincluding on site calibrations	Torque transducers	Torque	Gravimetric measurement with reference beam
Capability with Calibration and Measurement Capability of - in the range from 0.1 Nm and up to 1500 Nm 0.04% of reading in the range from 0.1 Nm and up to 100 Nm 0.1% of reading in the range above 100 Nm and up to 1500 Nm
	Torque wrenches	Torque	Comparison with a reference standard
Capability with Calibration and Measurement Capability of - Including onsite calibrations 0.5% of reading In the range from 0.1 Nm and up to 1500 Nm

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.

Victorian Laboratory

Scope of Accreditation

ISO/IEC 17025 (2017)

Benefits of being a NATA accredited organisation