Applus Pty Ltd

Site

Darwin Laboratory

Accreditation No.

17127

Site No.

18717

Date of Accreditation

26 Feb 2010

Address

3/14 Menmuir Street
Winnellie, NT 822
Australia

applus.com

Contact

Availability

Services available to external clients

Applus Pty Ltd address map

Scope of Accreditation

Print scopes
Darwin Laboratory

ISO/IEC 17025 (2017)

Infrastructure and Asset Integrity

Service Product Determinant Technique Procedure Limitations
Evaluation of mechanical performance of pressure equipment Piping; Pressure fittings Hydrostatic pressure Not applicable TP-07-07-36; AS 4041 Section 6.7, ASME B31.3 Section 345.4 150 kPa up to 70 MPa including on-site testing
Pressure vessels Hydrostatic pressure Not applicable TP-07-07-36; AS 1210 Section 5.10, AS 4037 Section 17, ASME VIII Division 1 UG-99 150 kPa up to 70 MPa including on-site testing
Non-destructive testing (NDT) - Electromagnetic testing Metallic surfaces Defect detection and characterisation High frequency eddy current
Non-destructive testing (NDT) - Magnetic particle testing Metallic surfaces - Magnetic Defect detection and characterisation AC magnetic flow
Non-destructive testing (NDT) - Penetrant testing Metallic surfaces Defect detection and characterisation Solvent removable; Water washable
Non-destructive testing (NDT) - Radiographic testing Castings - Cast irons, steel and alloy steels; Castings - Non-ferrous metals and alloys; Welded joints - Aluminium alloys; Welded joints - Clad and overlaid steel; Welded joints - Copper and copper-nickel alloys; Welded joints - Ferritic materials; Welded joints - Stainless steel, austenitic and duplex materials; Welded joints - Titanium and titanium alloys Defect detection and characterisation Film radiography
Metallic piping; Metallic tubes - Ferromagnetic materials; Metallic tubes - Non-ferromagnetic materials Material profiling; Wall thickness Film radiography
Non-destructive testing (NDT) - Ultrasonic testing Castings - Cast irons, steel and alloy steels; Rolled or wrought steel products; Welded joints - Clad and overlaid steel; Welded joints - Ferritic materials; Welded joints - Stainless steel, austenitic and duplex materials Defect detection and characterisation A-scan - Manual
Castings; Forgings; Metallic components; Metallic piping; Metallic plate; Metallic tubes - Ferromagnetic materials; Metallic tubes - Non-ferromagnetic materials Material thickness - Spot/grid only A-scan - Manual; Thickness meter
Material loss characterisation; Profiling A-scan - Manual
Non-destructive testing (NDT) - Visual testing - Prior to initial service Rolled products Defect detection Visual testing
Welded joints Defect detection Visual testing

ISO/IEC 17025 (2017)

Manufactured Goods

Service Product Determinant Technique Procedure Limitations
Material performance evaluation of metal products Welded test specimens Bending properties Longitudinal guided bend; Transverse guided bend

AS/NZS 2205.3.1, AS 2205.3.3, ASME IX QW-160; ISO 15173 

Macroscopic examination Macroscopic examination

TP-07-01-02, AS/NZS 2205.5.1, ASME IX QW 183,184, ISO 17639

 Welded qualification test pieces in carbon, low alloy and stainless steels
Fracture test Macroscopic examination; Visual examination

AS/NZS 2205.4.1; ASME IX QW-182; ISO 9017 

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.