Home / Enex Traffic Systems

Enex Pty Ltd

Site

Enex Traffic Systems

Accreditation No.

15589

Site No.

21055

Date of Accreditation

24 Sep 2012

Address

Unit 10, 355-365 South Gippsland Hwy,
Dandenong South, VIC 3175
Australia

testlab.com.au

Contact

Mr Steve Turvey P: +61 (03) 88996403

Availability

Services available to external clients

Scope of Accreditation

Print scopes

Enex Traffic Systems

ISO/IEC 17025 (2017)

Calibration

The uncertainty of measurement is reported as an expanded uncertainty having a level of confidence of 95% unless stated otherwise

Service	Product	Determinant	Technique	Procedure	Limitations
Speed and velocity - Speed measuring devices	Digital amphometers; Doppler (radar) equipment; Inductive loop devices - By electrical simulation; Laser equipment including LIDAR; Piezoelectric devices - By electrical simulation	Speed	Direct measurement against a reference standard	Radar speed measuring devices ("K" and "Ka" bands only) By the in-house methods: NX-IC004 Speed measurement device procedure to National Road Safety (General) Regulations 2019: Part 3 - Evidence Relating to Speeding and Other Offences and AS 2898.2 Section 2.2; Digitector speed measurement devices to National road Safety (General) Regulations 2019: Part 3 - Evidence Relating to Speeding and Other Offences. Inductive loop and piezo electric speed measurement devices using Enex test method NXCF001;
Capability with a Calibration and Measurement Capability of - Radar speed measurement devices 1.0 km/h from 22 km/h to 250 km/h Digitector speed measurement devices 1.0 km/h from 40 to 220 km/h Inductive loop and piezo electric speed measurement devices 0.6 km/h from 20 km/h to 130 km/h 0.7 km/h above 130 km/h to 200 km/h 0.8 km/h above 200 km/h to 250 km/h LIDAR Speed measurement devices 1.0 km/h from 25 km/h to 320 km/h
	Doppler (radar) equipment; Infra-red systems	Speed	Direct measurement against a reference standard	NX- IF001 Speed Accuracy Test Method
Capability TIRTL 0.7 km/h from 35 km/h to 40 km/h 0.6 km/h at 50 km/h 0.7 km/h at 60 km/h 0.6 km/h at 70 km/h 0.7 km/h from 80 km/h to 110 km/h Tracking & Mapping Radar (Speed detection only) 0.7 km/h from 35 km/h to 110 km/h Tracking Radar (Specifically RT4)(Speed detection only) 1.5 km/h at 40 km/h 1.5km/h at 50 km/h 1.5 km/h at 60 km/h 1.5 km/h at 70 km/h 1.5 km/h at 80 km/h 1.6 km/h at 90 km/h 1.6 km/h at 100 km/h 1.6 km/h at 110 km/h Inductive Loops 1.1 km/h from 35 km/h to 110 km/h
	Speedometers; Vehicle with digital display	Speed	By calibrated dynamometer; By time and length measurement	NX-IC001 Calibration - Vehicle Speed Enex NX-IS002 Calibration - Vehicle Speed Dynamometer
Capability with a Calibration and Measurement Capability of - Including on-site calibrations Enex vehicles fitted with digital speed displays only Using calibrated dynamometer 0.3 km/h from 30 km/h to 60 km/h 0.4 km/h above 60 km/h to 80 km/h 0.2 km/h above 80 km/h to 120 km/h Using time and length measurement 0.4 km/h from 20 km/h to 110 km/h
	Time interval equipment	Time interval	Direct measurement against a reference standard	NX-PTPF001 (Point To Point Systems)
Capability with a Calibration and Measurement Capability of - P2P Time Server Method 0.09 s at a duration of up to 24 hours (86 400 s) EVEC P2P Video Method 0.12 s at a duration of up to 24 hours (86 400 s) P2P Vehicle Timer Method 0.40 s at a duration of up to 10 000 s
	Vehicle speed dynamometers	Speed	By time and length measurement	Specifically 'Real Time 48" Compact 2WD' and 'AVL Zollner 48" RPL 1220 AWD Dynamometers by NX_IC003 Calibration -Dynamometer
Capability Calibrated in-situ at dynamometer Including on-site calibrations with a Calibration and Measurement Capability of - 0.06 km/h from 30 km/h to 100 km/h 0.07 km/h above 100 km/h to 120 km/h
Speed and velocity - Verification of fixed speed detector installations	Doppler (radar) equipment; Inductive loop speed measurement systems; Laser equipment including LIDAR; Piezoelectric speed measurement systems	Speed	Indirect measurement against a reference standard	ENEX test method NX-IF001-SATM	35 km/h to 110 km/h
Capability Including fixed mobile installations in a stationary vehicle With a Calibration and Measurement Capability of - 0.7 km/h from 35 km/h to 40 km/h 0.6 km/h at 50 km/h 0.7 km/h at 60 km/h 0.6 km/h at 70 km/h 0.7 km/h from 80 km/h to 110 km/h
	Inductive loop speed measurement systems	Field measurement of insulation resistance	Direct electrical measurement	"NX-RFXF001", "NX-GTCF001" and "NX-JNKF001"
Capability with a Calibration and Measurement Capability of - 10% from 0.5 MΩ to 500 MΩ at 500 V
		Field measurement of inductance	Direct electrical measurement	"NX-RFXF001", "NX-SGAF001" and "NX-JNKF001"
Capability with a Calibration and Measurement Capability of - Including on-site calibrations 3.6 % at 1 kHz from 30 μH to 400 μH
	Inductive loop speed measurement systems; Piezoelectric speed measurement systems	Field measurement of DC resistance	Direct electrical measurement	"NX-RFXF001", "NX-SGAF001" and "NX-JNKF001"
Capability with a Calibration and Measurement Capability of - Including on-site calibrations Inductive Loop In-Road Sensors 28% from 0.1 Ω to 1 Ω 2.9% above 1 Ω to 10 Ω 0.5% above 10 Ω to 100 Ω Piezo In-Road Sensors 0.13% from 330 kΩ to 500 kΩ 2.2% above 500 kΩ to 33 MΩ 4.6% above 33 MΩ to 100 MΩ 12% above 100 MΩ to 500 MΩ
	Piezoelectric speed measurement systems	Field measurement of voltage	Direct electrical measurement	NX-RFXF001
Capability with a Calibration and Measurement Capability of - Including on-site calibrations 11% from 80 mV to 10 V
	Traffic signal phase systems	Time interval	Comparison with a reference standard	"NX-RFXF001", "NX-SGAF001" and "NX-JNKF001"
Capability with a Calibration and Measurement Capability of - Including on-site calibrations 0.015 seconds from 0.0 seconds to 120 seconds
Speed and velocity - Verification of fixed speed detector installationsIncluding on-site calibrations	Piezoelectric speed measurement systems	Field measurement of capacitance	Direct electrical measurement	NX-RFXF001
Capability with a Calibration and Measurement Capability of - 3.9% from 1 nF to 30 nF

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.

Benefits of being a NATA accredited organisation

NATA accredits organisations to perform testing and inspection activities for their products and services. This gives consumers the assurance they need to make safe, healthy and reliable choices. When you choose to become NATA accredited, you can be sure of a number of competitive advantages for your business.

Enex Traffic Systems

Scope of Accreditation

ISO/IEC 17025 (2017)

Sign up for our newsletter

Benefits of being a NATA accredited organisation