Fusion NDT

Site

Fusion NDT Mechanical

Accreditation No.

20452

Site No.

16448

Date of Accreditation

25 Aug 2006

Address

7 Richard Street
Western Junction, TAS 7212
Australia

fusionndt.com.au

Contact

Mr Daniel Luttrell P: +61 0409004477

Availability

Services available to external clients

Fusion NDT address map

Scope of Accreditation

Print scopes
Fusion NDT Mechanical

ISO/IEC 17025 (2017)

Manufactured Goods

Service Product Determinant Technique Procedure Limitations
Material performance evaluation of metal products Fixtures and components; Prepared metallic test specimens Tensile properties Tensile tests with control of strain rate, including yield stress and proof stress

AS 1391;
ASTM A370;

 ISO 6892.1; 

DNV GL RU-Ship-Pt2 Chapter 1 Section 3; 

Lloyds Rules for the Manufacture, Testing and Certification of Materials Chapter 2 Section 2.

5 to 1000 kN
Prepared metallic test specimens Hardness Rockwell - Scale B; Rockwell - Scale C AS 1815.1;
ASTM E18;
ASTM A370;
ISO 6508-1.
Tensile properties Tensile tests with control of strain rate, including yield stress and proof stress ASTM E8/E8M
Bending properties Simple bend

AS/NZS 2205.3.1;

ASTM A370 
Impact resistance Charpy - Assessment of fracture appearance; Charpy V-notch - Impact value

AS 1544.2, 1544.5

ISO 148.1;
DNV GL RU-Ship-Pt2 Chapter 1 Section 3;
Lloyds Rules for the Manufacture, Testing and Certification of Materials Chapter 2 Section 3

in the temperature range -50°C to ambient
Hardness Brinell

AS 1816.1;
ASTM A370

4.9 to 29.4 kN
Hardness Vickers

AS 1817.1;

ISO 6507-1.

9.8 to 980 N
Reinforcing bar and steel prestressing materials for concrete Tensile properties Longitudinal tensile AS/NZS 4671;
ISO 15630-1;
ISO 15630-2.
Welded test specimens Shear strength Not applicable

AS/NZS 1554.3;
ISO 15630-2.
Hardness Vickers

AS 2205.6.1;

ISO 9015.1

9.8 to 980 N
Fracture test Macroscopic examination; Visual examination

AS/NZS 2205.4.1;

ASME IX QW 181;

ISO 9017;
AWS D1.1/D1.1M;
AWS B4.0.
Bending properties Not applicable

AS/NZS 2205.3.1;

ASME IX QW160;

ISO 5173;
DNV RU-SHIP P12 Ch1 Section3;
Lloyds Rules for Manuf, Testing & Cert of Mat'l Chapter2 Section7;
AWS D1.1/D1.1M;
AWS B4.0.
Macroscopic examination Macroscopic examination

AS/NZS 2205.5.1;

ASME IX QW 183, QW 184;

ISO 17639;
AWS D1.1/D1.1M;
AWS B4.0;
ASTM E340.
Tensile properties All-weld-metal tensile; Axial tensile; Longitudinal tensile; Transverse butt tensile; Transverse joggle-butt tensile; Transverse tensile; Uniaxial tension

AS 2205.2.1;
AS 2205.2.2;
AS 2205.2.3;
ASME IX QW 151;

ISO 4136;
DNV GL RU-Ship-Pt2 Chapter 1 Section 3;
Lloyds Rules for the Manufacture, Testing and Certification of Materials Chapter 2 Section 2;

AWS D1.1/D1.1M;
AWS B4.0;
ASTM E8/E8M

5 kN to 1000 kN
Impact resistance Charpy - Assessment of fracture appearance; Charpy V-notch - Impact value

AS 2205.7.1; ISO 9016; 

DNV GL RU-Ship-Pt2 Chapter 1 Section 3; 

Lloyds Rules for the Manufacture, Testing and Certification of Materials Chapter 2 Section 3

in the temperature range -50°C to ambient

The only data displayed is that deemed relevant and necessary for the clear description of the Activities and Services covered by the Scope of Accreditation (SoA).

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.

The Product column may also describe an Item or Material.

The Limitations column may also describe the Range.