Hinco Instruments

Site

Hinco Instruments

Accreditation No.

21447

Site No.

25808

Date of Accreditation

14 Aug 2025

Address

5/52 Vinnicombe Drive
Canning Vale, WA 6155
Australia

hinco.com.au

Contact

Mr Hayden Wetton P: +61 (08) 94556777

Availability

Services available to external clients

Hinco Instruments address map

Scope of Accreditation

Print scopes
Hinco Instruments

ISO/IEC 17025 (2017)

Calibration

  • The uncertainty of measurement is reported as an expanded uncertainty having a level of confidence of 95% unless stated otherwise
Service Product Determinant Technique Procedure Limitations
Temperature metrology - Ancillary temperature measuring equipment Digital voltmeters (DVM) and digital multimeters (DMM); Multi-channel thermocouple data recorders; Process calibrators Resistance to temperature conversion; Volt to temperature conversion Direct measurement by electrical input

Capability

with Calibration and Measurement Capability of
Measure and source 
0.25 % of range or 3.5 ºC (whichever is greater) from -200 ˚C to 1372 ˚C (Type K thermocouple)
0.25 % of range or 2.0 ºC (whichever is greater) from -200 ˚C to 1200 ˚C (Type J thermocouple)
0.25 % of range or 3.5 ºC (whichever is greater) from -100 ˚C to1300 ˚C (Type N thermocouple)
0.25 % of range or 4.0 ºC (whichever is greater) from 0 ˚C to 1767 ˚C (Type R thermocouple)
0.25 % of range or 1.3 ºC (whichever is greater) from -200 ˚C to 400˚C (Type T thermocouple)
0.25 % of range or 2.3 ºC (whichever is greater) from -200 ˚C to 800 ˚C (RTD PT100 )


Temperature metrology - Temperature measuring equipment Digital temperature measuring systems; Temperature loggers - Single and multi-channel Temperature Comparison with a reference standard  

Capability

including on site calibrations
with Calibration and Measurement Capability of
0.25 °C from -25 ˚C to 0 ˚C
0.05˚C at 0 ˚C (Using Ice Point)
0.1 ˚C above 0 ˚C to 200 ˚C
1.0 ˚C above 200 ˚C to 800 ˚C
 3.25˚C above 800 ˚C to 1000˚C

Temperature metrology - Temperature standards and reference equipment Dry block calibrators Temperature Direct measurement using a reference standard

Capability

Including on-site calibrations
with Calibration and Measurement Capability of
0.25˚C from -25 ˚C to 0 ˚C
0.2 ˚C above 0 ˚C to 200 ˚C
1.0 ˚C above 200 ˚C to 800 ˚C
3.25 ˚C above 800 ˚C to 1000 ºC

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.