National Association of Testing Authorities, Australia
Scope of Accreditation
HOSECO AUSTRALIA PTY LTD
Site
Hoseco Assembly & Testing
Accreditation No.
19144
Site No.
21627
Date of Accreditation
19 Aug 2014
Contact
Mr David Russell
P: +61 0439984820
Availability
Services available to external clients
Scope of Accreditation
Hoseco Assembly & Testing
ISO/IEC 17025 (2017)
Infrastructure and Asset Integrity
Service | Product | Determinant | Technique | Procedure | Limitations |
---|---|---|---|---|---|
Evaluation of mechanical performance of pressure equipment | Hose and hose assemblies | Vacuum pressure | Not applicable |
Guidelines for the Handling, Storage, Inspection and Testing of Hoses in the field- OCIMF 2nd Ed (1995) Section 4.5.3 Single Point Mooring Maintenance and Operations Guide (SMOG) - OCIMF 3rd Ed. (2015) Section 5.7.3. |
less than 0 to -100 kPa |
Conductivity; Electrical resistance | Not applicable |
AS 1180.13A (1983), AS 1180.13B (1987), AS 2117 Sections 2.6.1, 2.6.2, AS 2683 Section 2.4, ISO 8031 Sections 5,6, International Safety Guidelines for Oil Tankers and Terminals (ISGOTT) Section 18.2.6.4 |
including on-site testing. | ||
Hydrostatic pressure; Length change | Not applicable |
AS 1180.5 Section 7 (1999), AS 1851 Table 8.4 item 1.4, AS 2792 Appendix E, AS/NZS 4233.1 Appendix E, ISO 1402 Section 8.1, ISO 6605 Clause 5.2, ISO 10380 Section 5.3, ISO 1825 Appendix J1.2 and Appendix O.3c), SAE J343 Section 4.2, Guidelines for the Handling, Storage, Inspection and Testing of Hoses in the field - OCIMF - 2nd Ed (1995) Section 4.5.1, Single Point Mooring Maintenance and Operations Guide (SMOG) - OCIMF 3rd Ed. (2015) Sections 5.6.3 and 5.7.2, In-house method TP-003 |
Up to 400 MPa including on-site testing for all listed Standards with the following exceptions: Up to 6 MPa including on-site testing for Single Point Mooring Maintenance and Operations Guide (SMOG) - OCIMF 3rd Ed. (2015) Section 5.7.2 Up to 3 MPa including on-site testing for Single Point Mooring Maintenance and Operations Guide (SMOG) - OCIMF 3rd Ed. (2015) Sections 5.6.3 In-house method TP-003 for compliance with: Dunlop Oil & Marine Limited - Hose Management Inspection Guidelines for HP Drilling and Production Hoses ISS-059 Rev.7 (2013) (API Hoses 7K, 16C and 17K) |
||
Pneumatic pressure | Not applicable | in-house method TP-180 | Up to 1.5 MPa including on-site testing |
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.
Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.
Accreditation No.
19144
Site No.
21627
Print date
24 Apr 2024
END OF SCOPE