Asset Reliability Inspections Pty Ltd

Site

Keysborough NDT and Mechanical Laboratory

Accreditation No.

18851

Site No.

16782

Date of Accreditation

26 Jun 2025

Address

66 Indian Drive
Keysborough, VIC 3173
Australia

aben-tech.com.au

Contact

Mr Angelo Zaccari P: +61 (03) 97911118

Availability

Services available to external clients

Asset Reliability Inspections Pty Ltd address map

Scope of Accreditation

Print scopes
Keysborough NDT and Mechanical Laboratory

ISO/IEC 17025 (2017)

Infrastructure and Asset Integrity

Service Product Determinant Technique Procedure Limitations
Evaluation of high voltage/power equipment and components - Performance Cable coupling devices Holding tension (slip withstand) Not applicable IEC 60512-16-4
Evaluation of mechanical performance of pressure equipment Piping; Pressure fittings Hydrostatic pressure Not applicable AS 4041 Section 6.7; AS 4037 Section 17; AS 1631 Section 9; ASME B31.3 Chapter VI, Section 345 up to 65 MPa
Pressure vessels Hydrostatic pressure Not applicable AS 4041 Section 6.7; AS 4037 Section 17; ASME VIII Div. I Section UG-99 up to 65 MPa, including onsite tests
Non-destructive testing (NDT) - Electromagnetic testing Castings - Cast irons, steel and alloy steels; Welded joints - Stainless steel, austenitic and duplex materials Ferrite number Ferrite meter
Coatings Coating thickness High frequency eddy current
Composite materials; Metallic tubes - Non-ferromagnetic materials; Rolled or wrought non-ferrous materials Defect detection and characterisation Low frequency eddy current
Metallic surfaces Defect detection and characterisation High frequency eddy current
Metallic tubes - Non-ferromagnetic materials Profiling Multiple frequency eddy current
Non-destructive testing (NDT) - Magnetic particle testing Metallic surfaces - Magnetic Defect detection and characterisation AC magnetic flow; Coil; Current flow
Non-destructive testing (NDT) - Penetrant testing Metallic surfaces Defect detection and characterisation Post emulsifiable; Solvent removable; Water washable
Non-destructive testing (NDT) - Radiographic testing Castings - Cast irons, steel and alloy steels; Castings - Non-ferrous metals and alloys; Rolled or wrought aluminium products; Rolled or wrought steel products; Welded joints - Clad and overlaid steel; Welded joints - Copper and copper-nickel alloys; Welded joints - Ferritic materials; Welded joints - Stainless steel, austenitic and duplex materials; Welded joints - Titanium and titanium alloys Defect detection and characterisation Film radiography
Metallic piping; Metallic tubes - Ferromagnetic materials; Metallic tubes - Non-ferromagnetic materials Material profiling - Low intensity/pulsed Film radiography
Material profiling; Wall thickness Film radiography
Non-destructive testing (NDT) - Ultrasonic testing Castings - Cast irons, steel and alloy steels; Castings - Non-ferrous metals and alloys; Rolled or wrought aluminium products; Rolled or wrought steel products; Welded joints - Aluminium alloys; Welded joints - Ferritic materials; Welded joints - Stainless steel, austenitic and duplex materials Defect detection and characterisation A-scan - Manual
Castings; Forgings; Metallic components; Metallic piping; Metallic plate; Metallic tubes - Non-ferromagnetic materials; Non-metallic components Material thickness - Spot/grid only A-scan - Manual; Thickness meter
Castings; Forgings; Metallic piping; Metallic plate; Metallic tubes - Ferromagnetic materials; Metallic tubes - Non-ferromagnetic materials Material loss characterisation; Profiling A-scan - Manual
Non-destructive testing (NDT) - Ultrasonic testing - Specialised - Phased array (PAUT) Castings - Cast irons, steel and alloy steels; Castings - Non-ferrous metals and alloys; Rolled or wrought aluminium products; Rolled or wrought steel products; Welded joints - Aluminium alloys; Welded joints - Ferritic materials; Welded joints - Stainless steel, austenitic and duplex materials Defect detection and characterisation Manual
Non-destructive testing (NDT) - Visual testing - During service life Castings Defect detection Visual testing Examination of Structural members, train bogies, concrete booms, mining equipment for pitting, cracking and other surface discontinuities.
Forgings Defect detection Visual testing Examination of Structural members, train bogies, concrete booms, mining equipment for pitting, cracking and other surface discontinuities.
Rolled products Defect detection Visual testing Examination of Structural members, train bogies, concrete booms, mining equipment for pitting, cracking and other surface discontinuities.
Welded joints Defect detection Visual testing Examination of Structural members, train bogies, concrete booms, mining equipment for pitting, cracking and other surface discontinuities.
Non-destructive testing (NDT) - Visual testing - Prior to initial service Castings; Forgings; Rolled products Defect detection Visual testing
Welded joints Defect detection Visual testing

ISO/IEC 17025 (2017)

Manufactured Goods

Service Product Determinant Technique Procedure Limitations
Material performance evaluation of metal products Fixtures and components; Prepared metallic test specimens; Welded test specimens Tensile properties All-weld-metal tensile; Axial tensile; Longitudinal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse butt tensile; Transverse joggle-butt tensile; Transverse tensile; Uniaxial tension

AS 1391; ASTM A370; ISO 6892-1; ISO 4136

1 N to 250 kN

Prepared metallic test specimens; Welded test specimens Impact resistance Charpy - Lateral expansion; Charpy V-notch - Impact value

AS 1544.2; AS 2205.7.1; ASTM A370; ISO 148-1; ISO 9016

 At ambient temperature and down to -800 Degrees C
Hardness Rockwell - Scale B; Rockwell - Scale C

AS 1815.1

Hardness Vickers

AS 1817.1; ISO 9015-1

24.5 N to 980 N

Hardness Brinell - Portable tester

ASTM E110

at 29.4 kN

Welded test specimens Macroscopic examination Macroscopic examination

AS/NZS 2205.5.1; ISO 17639

Fracture test Macroscopic examination; Visual examination

AS/NZS 2205.4.1; ISO 9017

Bending properties Longitudinal guided bend; Tongue bend; Transverse free bend; Transverse guided bend; Transverse joggle-butt wrap around bend

AS NZS 2205.3.1; AS 2205.3.2; AS 2205.3.4; AS 2205.3.5; ISO 5173

ISO/IEC 17025 (2017)

Materials

Service Product Determinant Technique Procedure Limitations
Metallic corrosion evaluation Austenitic, duplex and nickel-chromium alloys; Ferrous materials Intergranular corrosion resistance; Pitting corrosion resistance Copper-copper sulfate-sulfuric acid; Ferric chloride pitting

ASTM G48M Method A; ASTM A763 Practice Z

Metallographic evaluation of metals and alloys Austenitic, duplex and nickel-chromium alloys Detection of iron on passivated steel - Contamination test Potassium ferricyanide nitric acid

ASTM A380 Clause 7.3.4

Ferrous materials Solidification analysis of steel castings Macroscopic examination; Visual examination

AAR M210 Sections 4.3.4, 4.3.5 

AAR M211 Sections 4.3.3.2, 4.3.3.3, 4.3.3.4; 4.3.3.5

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.