Marine Inspection Service Pty Ltd

Site

Marine Inspection Service Pty Ltd

Accreditation No.

12425

Site No.

12418

Date of Accreditation

11 Nov 1996

Address

8 Egmont Road
Henderson, WA 6166
Australia

misperth.com.au

Contact

Mr Wayne Cridland P: +61 (08) 65954000

Availability

Services available to external clients

Marine Inspection Service Pty Ltd address map

Scope of Accreditation

Print scopes
Marine Inspection Service Pty Ltd

ISO/IEC 17025 (2017)

Manufactured Goods

Service Product Determinant Technique Procedure Limitations
Material performance evaluation of elastomers, plastics and composite products Belting Pull-out strength Not applicable

AS 1333 Appendix I

0.5 kN to 500 kN

Material performance evaluation of metal products Prepared metallic test specimens Hardness Brinell

AS 1816.1

49 N to 29.4 kN

Hardness Brinell - Portable tester

AS 1816.1

4.9 kN to 29.4 kN

Impact resistance Charpy - Assessment of fracture appearance; Charpy V-notch - Impact value

AS 1544.2, ASTM E23 

-101 to 100°C and at -196°C

Hardness Rockwell - Scale B; Rockwell - Scale C

AS 1815.1, ASTM E18

Tensile properties Tensile tests with control of strain rate, including yield stress and proof stress

AS 1391, ASTM A370, ASTM E8/E8M, ISO 6892.1

0.5 kN to 500 kN

Bending properties Longitudinal guided bend; Tongue bend; Transverse free bend; Transverse joggle-butt wrap around bend

AS/NZS 2205.3.1, AS 2205.3.2, AS 2205.3.3, AS 2205.3.4, AS 2205.3.5

Hardness Vickers

AS 1817.1, ASTM E384

9.8 N to 980 N

Welded test specimens Shear strength Not applicable

AS/NZS 1554.3, BS EN ISO 15630-2

Hardness Brinell

AS 1816.1

49 N to 29.4 kN

Macroscopic examination Macroscopic examination

 AS/NZS 2205.5.1

Bending properties Not applicable

ASTM A370

Hardness Brinell - Portable tester

AS 1816.1

4.9 kN to 29.4 kN

Impact resistance Charpy - Assessment of fracture appearance; Charpy V-notch - Impact value

AS 1544.2, ASTM E23

from -101 to 100°C and at -196°C

Bending properties Transverse guided bend

AS/NZS 2205.3.1

Fracture test Visual examination

AS/NZS 2205.4.1; ASTM A370

Hardness Vickers

AS 1817.1,  ASTM E384

9.8 N to 980 N

Hardness Rockwell - Scale B; Rockwell - Scale C

AS 1815.1, ASTM E18

Fracture test Visual examination

AS/NZS 2205.4.1,  ASTM A370

Tensile properties All-weld-metal tensile; Axial tensile; Longitudinal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse butt tensile; Transverse joggle-butt tensile; Transverse tensile; Uniaxial tension

AS 1391, ASTM A370, ASTM E8/E8M, ISO 6892.1, ISO 6892.2 

0.5 kN to 500 kN

ASTM A370 tests are done for compliance to DNVGL-ST-F101:2017 and ASME IX - 2021

ISO/IEC 17025 (2017)

Materials

Service Product Determinant Technique Procedure Limitations
Metallic corrosion evaluation Austenitic, duplex and nickel-chromium alloys Pitting corrosion resistance Ferric chloride pitting

ASTM G48 Method A

Intergranular corrosion resistance Copper-copper sulfate-50% sulfuric acid; Copper-copper sulfate-sulfuric acid; Ferric sulfate - Sulfuric acid; Nitric acid; Oxalic acid etch

ASTM A262, ASTM G28 Method A 

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.