National Association of Testing Authorities, Australia
Scope of Accreditation
Ektimo Pty Ltd
Site
Melbourne Laboratory
Accreditation No.
14601
Site No.
14659
Date of Accreditation
28 Aug 2001
Contact
Ms Jena Peskett P: +61 0406596658
Availability
Services available to external clients
Scope of Accreditation
Melbourne Laboratory
ISO/IEC 17025 (2017)
Environment
| Service | Product | Determinant | Technique | Procedure |
|---|---|---|---|---|
| Analysis for elements | Impinger solutions; Monitoring filters | Aluminium; Antimony; Arsenic; Barium; Beryllium; Bismuth; Boron; Cadmium; Caesium; Calcium; Chromium; Cobalt; Copper; Gallium; Germanium; Gold; Hafnium; Indium; Iridium; Iron; Lead; Lithium; Magnesium; Manganese; Mercury; Molybdenum; Nickel; Niobium; Palladium; Phosphorus; Platinum; Potassium; Rhenium; Rhodium; Rubidium; Ruthenium; Selenium; Silicon; Silver; Sodium; Strontium; Tantalum; Tellurium; Thallium; Thorium; Tin; Titanium; Tungsten; Uranium; Vanadium; Zinc; Zirconium | ICP-MS | in-house method Ektimo 666 |
| Analysis for hydrocarbons | Emissions - Stack | 1,3-Butadiene; 1-Butylene (1-butene); Butane (n-butane); Dimethylether; Ethane; Ethene (ethylene); Ethyne (acetylene); Isobutane; Isobutene (iso-Butene); Methane; Propane; Propene (propylene); Vinyl chloride; cis-2-Butene; trans-2-Butene | GC-FID | Ektimo 340 |
| Volatile organic compounds (VOCs) | GC-FID; GC-MS | NSW EPA TM-34; USEPA method18 | ||
| 2,5-Dimethylbenzaldehyde; 2-Methylbenzaldehyde (o-tolualdehyde); 2-Methylpropanal (isobutyraldehyde); 3-Methylbenzaldehyde (m-tolualdehyde); 3-Methylbutanal (isovaleraldehyde); 4-Methylbenzaldehyde (p-tolualdehyde); Acetaldehyde (ethanal); Acetone; Acrolein (2-propenal); Benzaldehyde (phenylmethanal); Butanone (methyl ethyl ketone, MEK, 2-butanone); Crotonaldehyde; Formaldehyde (methanal); Hexanal (hexaldehyde); Pentanal (valeraldehyde); Propionaldehyde (propanal); n-Butyraldehyde | HPLC | Ektimo 330 | ||
| 1,3,5-Trimethylbenzene (1,3,5-TMB, mesitylene); 1-Butylene (1-butene); 2,5-Dimethylbenzaldehyde; 2-Ethoxyethanol (cellosolve); 2-Ethoxyethyl acetate (ethylene glycol monoethyl ether acetate, cellosolve acetate, EGMEA); 2-Methylbenzaldehyde (o-tolualdehyde); 3-Methylbenzaldehyde (m-tolualdehyde); 4-Methylbenzaldehyde (p-tolualdehyde); Acetaldehyde (ethanal); Acrylates and methacrylates: C1-C10; Acrylonitrile; Alcohols: C1-C10; Benzaldehyde (phenylmethanal); Benzene; Butanone (methyl ethyl ketone, MEK, 2-butanone); Crotonaldehyde; Cyclohexanone; Decyl aldehyde (decanal); Dichloromethane (DCM, methylene chloride); Diethyl ether; Dimethylether; Esters: C1-C10; Ethylbenzene; Ethyne (acetylene); Formaldehyde (methanal); Freons; Halogenated hydrocarbons; Heptanal; Hexanal (hexaldehyde); Hydrocarbons: C1-C10; Isobutene (iso-Butene); Mercaptans; Methylene diphenyl diisocyanate (MDI, isocyanate MDI, diphenylmethane diisocyanate); Monocyclic aromatic halogenated hydrocarbons; Monocyclic aromatic hydrocarbons; Naphthas; Nonanal; Octanal; Oxirane (ethyleneoxide); Pentanal (valeraldehyde); Polycyclic aromatic hydrocarbons (PAHs); Propylene (propene) oxide; Styrene (ethenyl benzene); Toluene; Toluene-2,6- diisocyanate (2,6-TDI); Trichlorofluoromethane (freon-11, trichloromonofluoromethane); Vinyl chloride; Volatile organic compounds (VOCs); Xylene; n-Butyraldehyde | GC-FID; GC-MS | Ektimo 344 | ||
| Volatile organic compounds (VOCs) - Total | Flame ionisation detector (FID) | NSW EPA TM-20 | ||
| Combination of air impurities from two or more sources | Calculation | NSW EPA TM-38 | ||
| Volatile organic compounds (VOCs) - Total | Nondispersive infrared (NDIR) | USEPA method 25B | ||
| 2,5-Dimethylbenzaldehyde; 2-Methylbenzaldehyde (o-tolualdehyde); 2-Methylpropanal (isobutyraldehyde); 3-Methylbenzaldehyde (m-tolualdehyde); 3-Methylbutanal (isovaleraldehyde); 4-Methylbenzaldehyde (p-tolualdehyde); Acetaldehyde (ethanal); Acrolein (2-propenal); Benzaldehyde (phenylmethanal); Butanone (methyl ethyl ketone, MEK, 2-butanone); Crotonaldehyde; Cyclohexanone; Decyl aldehyde (decanal); Formaldehyde (methanal); Heptanal; Hexanal (hexaldehyde); Nonanal; Octanal; Pentanal (valeraldehyde); Propionaldehyde (propanal); n-Butyraldehyde | HPLC | Ektimo 332 | ||
| 1,3,5-Trimethylbenzene (1,3,5-TMB, mesitylene); Benzene; Butanone (methyl ethyl ketone, MEK, 2-butanone); Dichloromethane (DCM, methylene chloride); Ethylbenzene; Styrene (ethenyl benzene); Toluene; Trichlorofluoromethane (freon-11, trichloromonofluoromethane); Vinyl chloride | GC-MS | USEPA SW846 method 8260 | ||
| Methylene diphenyl diisocyanate (MDI, isocyanate MDI, diphenylmethane diisocyanate); Toluene-2,4-diisocyanate (2,4-TDI); Toluene-2,6- diisocyanate (2,6-TDI) | HPLC | Ektimo 350 | ||
| Passivated cannisters; Tedlar bags | Methane; Propane | GC-FID; GC-TCD | Ektimo 346 | |
| 1,1,1-Trichloroethane (1,1,1-TCA, methyl chloroform, chlorothene); 1,1,2,2-Tetrachloroethane (acetylene tetrachloride); 1,1,2-Trichloro-1,2,2-trifluoroethane (freon 113' trichlorotrifluoroethane); 1,1,2-Trichloroethane (1,1,2-TCA, vinyl trichloride); 1,1-Dichloroacetone; 1,1-Dichloroethane (1,1-DCA); 1,1-Dichloroethene (1,1-DCE, vinylidene chloride); 1,1-Dichloroethylene; 1,2 Dibromoethane (ethylene dibromide, EDB); 1,2,4-Trichlorobenzene (1,2,4-TCB); 1,2,4-Trimethylbenzene (1,2,4-TMB, pseudo-cumene); 1,2-Dibromoethene; 1,2-Dichlorobenzene (o-dichlorobenzene); 1,2-Dichloroethane (1,2-DCA, ethylene dichloride); 1,2-Dichloropropane (propylene dichloride); 1,2-Dichlorotetrafluoroethane (freon-114); 1,3,5-Trimethylbenzene (1,3,5-TMB, mesitylene); 1,3-Butadiene; 1,3-Dichlorobenzene (m-dichlorobenzene); 1,4-Dichlorobenzene (p-dichlorobenzene); 1,4-Dioxane; 4-Ethyltoluene; 4-Methyl-2-pentanone (methyl isobutyl ketone, MIBK); Acetone; Acrolein (2-propenal); Benzene; Benzylchloride (chloromethylbenzene); Bromodichloromethane (dichlorobromomethane); Bromoform (tribromomethane); Bromomethane (methylbromide); Butanone (methyl ethyl ketone, MEK, 2-butanone); Carbon disulfide; Carbon tetrachloride (tetrachloromethane); Chlorobenzene (benzene chloride, monochlorobenzene); Chloroethane; Chloromethane; Cyclohexane; Dibromochloromethane (chlorodibromomethane); Dichlorodifluoromethane (freon-12); Dichloromethane (DCM, methylene chloride); Diethyl ether; Ethanol; Ethylacetate; Ethylbenzene; Heptane (n-heptane); Hexachloro-1,3-butadiene (hexachlorobutadiene, HCBD); Hexane (n-hexane); Methyl butyl ketone; Methyl tert-butyl ether (MTBE); Methylmethacrylate; Naphthalene; Propan-2-ol (isopropyl alcohol, isopropanol, 2-propanol); Propene (propylene); Propionaldehyde (propanal); Styrene (ethenyl benzene); Tetrachloroethene (perchloroethylene, perchloroethene, tetrachloroethylene); Tetrahydrofuran (THF); Toluene; Total organic compounds (as hexane equivalent); Trichloroethene (trichloroethylene, TCE); Trichlorofluoromethane (freon-11, trichloromonofluoromethane); Trichloromethane (chloroform); Vinyl acetate; Vinyl chloride; cis-1,2-Dichloroethylene; cis-1,3-Dichloropropene (cis-1,3-dichloropropylene); m-Xylene; o-Xylene; p-Xylene; trans-1,2-Dichloroethene (trans-1,2-DCE, trans-1,2-dichloroethylene); trans-1,3-Dichloropropene (trans-1,3-dichloropropylene) | GC-MS | Ektimo 345B | ||
| Analysis for industrial chemicals | Emissions - Industrial | Glycols; Methanol; Oxirane (ethyleneoxide) | GC-FID | Ektimo 344 |
| Cyclohexanone | GC-MS | USEPA SW846 method 8260 | ||
| Passivated cannisters; Tedlar bags | Carbonyl sulfide; Dimethylsulfide; Ethanethiol; Hydrogen sulfide; Methanethiol | GC-MS | Ektimo 345A | |
| Argon; Carbon dioxide (CO2); Carbon monoxide; Hydrogen; Nitrogen; Oxygen | GC-FID; GC-TCD | Ektimo 346 | ||
| Analysis for phenols | Emissions - Stack | 2-Methylphenol (2-cresol, o-cresol); 3-Methylphenol (3-cresol, m-cresol); 4-Methylphenol (4-cresol, p-cresol); Phenol; Resorcinol | HPLC | Ektimo 320 |
| Analysis for physical and chemical characteristics | Air - Ambient | Suspended particulate matter - Total | Gravimetric | AS 3580.9.3 |
| Ozone | Direct reading instrument | AS 3580.6.1 | ||
| Particulate matter - PM2.5 | Beta attenuation monitors | AS 3580.9.12 | ||
| Particulate matter - PM10 | Beta attenuation monitors | AS 3580.9.11 | ||
| Sulfur dioxide | Direct reading instrument | AS 3580.4.1 | ||
| Data validation | Calculation | AS 3580.19 | ||
| Deposited matter | Gravimetric | AS 3580.10.1 | ||
| Nitrogen - Oxidised | Direct reading instrument | AS 3580.5.1 | ||
| Particulate matter - PM10 | Gravimetric | AS 3580.9.6 | ||
| Carbon monoxide | Direct reading instrument | AS 3580.7.1 | ||
| Emissions - Stack | Carbon dioxide (CO2); Molecular weight - Dry | Calculation; Infrared (IR) | SA EPA 03.08 | |
| Flow rate; Velocity | Pitot | ISO 10780; SA EPA 03.10; USEPA method 2; AS 4323.1 | ||
| Nitrogen - Oxidised; Sulfur dioxide | Gas analyser | USEPA method 20 | ||
| Hydrogen sulfide | Titration | USEPA method 11; VIC EPA B18 | ||
| Carbon dioxide (CO2); Oxygen | Gas analyser | USEPA method 3A | ||
| Carbon - Total organic (TOC) | Calculation | USEPA Performance Specification 8a | ||
| Total gaseous organic concentration | Flame ionisation detector (FID) | USEPA method 25A | ||
| Particulate matter - Condensable | Gravimetric | USEPA method 202 | ||
| Bromide; Chloride; Fluoride; Sulfate | Ion chromatography (IC) | Ektimo 235 | ||
| Carbon dioxide (CO2); Oxygen | Calculation | USEPA Performance Specification 3 | ||
| Particulate matter - Total | Gravimetric | AS 4323.2; ISO 9096; NSW EPA TM-15; SA EPA 03.01; USEPA method 5; USEPA method 17; VDI 2066 | ||
| Particulate matter - PM10 | Gravimetric | Ektimo 121 | ||
| Nitrogen dioxide; Nitrogen monoxide; Nitrogen oxide | Gas analyser | ISO 10849; NSW EPA TM-11 | ||
| Hydrogen sulfide | Calculation | USEPA Performance Specification 7 | ||
| pH | Electrometric | Ektimo 170 | ||
| Fluoride - Acid soluble particulate; Fluoride - Gaseous | Ion selective electrode (ISE) | AS 3580.13.2 | ||
| Carbon dioxide (CO2); Carbon monoxide; Oxygen | Gas analyser | ISO 12039 | ||
| Sulfur dioxide | Gas analyser | ISO 7935; NSW EPA TM-4; USEPA method 6C | ||
| Nitrogen - Oxidised; Sulfur dioxide | Calculation | USEPA Performance Specification 2 | ||
| Carbon dioxide (CO2) | Gas analyser | NSW EPA TM-24 | ||
| Sulfur - Total reduced | Gas analyser | USEPA method 16C | ||
| Oxygen | Gas analyser | NSW EPA TM-25 | ||
| Hydrogen sulfide | UV-vis spectrophotometry | Ektimo 255; NSW EPA TM-5 | ||
| Carbon dioxide (CO2); Carbon monoxide; Nitrogen - Oxidised; Oxygen; Sulfur dioxide | Gas analyser | SA EPA 03.14 | ||
| Fluoride | Ion selective electrode (ISE) | Ektimo 240; SA EPA 03.03 | ||
| Water vapour (<100ºC) | Gravimetric | VIC EPA 3040 | ||
| Particulate matter - PM10; Particulate matter - PM2.5 | Gravimetric | USEPA method 201A; NSW EPA OM-5 | ||
| Sulfur dioxide | Titration | USEPA method 6 | ||
| Ammonia | Ion selective electrode (ISE) | in-house method Ektimo 260 | ||
| Carbon monoxide | Gas analyser | NSW EPA TM-32; SA EPA 03.12; USEPA method 10 | ||
| Flow rate | Calculation | USEPA Performance Specification 6 | ||
| Carbon monoxide; Nitrogen - Oxidised; Oxygen | Gas analyser | USEPA method OTM 13 | ||
| Carbon monoxide | Calculation | USEPA CEMS Performance Specification 4; USEPA CEMS Performance Specification 4A | ||
| Moisture | Gravimetric | Ektimo 050; NSW EPA TM-22 ; SA EPA 03.13; USEPA method 4; USEPA method ALT 008 | ||
| Particulate matter | Calculation | USEPA Performance Specification 11 | ||
| Sulfur dioxide | Ion chromatography (IC) | ISO 11632 | ||
| Blackness of smoke | Ringelmann chart | AS 3543; NSW EPA TM-16 | ||
| Sulfur - Total reduced | Calculation | USEPA Performance Specification 5 | ||
| Molecular weight - Dry | Calculation | USEPA method 3; NSW EPA TM-23 | ||
| Sulfur oxides; Sulfuric acid mist | Titration | SA EPA 03.02; USEPA method 8 | ||
| Odour | Olfactometry | AS 4323.3; NSW EPA OM-7 | ||
| Fluoride - Soluble | Ion selective electrode (ISE) | VIC EPA 3142 | ||
| Flow rate; Pressure; Temperature; Velocity | Classical; Direct reading instrument | NSW EPA TM-2 | ||
| Nitrogen - Oxidised | Gas analyser | USEPA method 7E | ||
| Coarse particles | Gravimetric | NSW EPA OM-9 | ||
| Carbon dioxide - Total; Oxygen | Calculation | USEPA Performance Specification 3 | ||
| Combination of air impurities from two or more sources | Calculation | NSW EPA TM-38 | ||
| Emissions - Stationary sources | Particulate matter - Non-sulfuric acid | Gravimetric | USEPA method 5B | |
| Meteorological monitoring | Atmosphere | Solar radiation | Pyranometer | AS 3580.14 |
| Pressure; Rainfall; Relative humidity (RH); Temperature; Wind direction; Wind speed - Horizontal | Barometer; Hygrometer; Rainfall gauge; Temperature probe; Ultrasonic anemometer | AS 3580.14 | ||
| Sample collection | Air - Ambient | Not applicable | High volume air sampler (HVAS) | AS 3580.9.3 - Total suspended particulates (TSP) - high volume sampler |
| Not applicable | Siting of air monitoring equipment | AS 3580.1.1 | ||
| Not applicable | Canisters | USEPA method TO-15 | ||
| Not applicable | Low volume air sampler (LVAS) | AS 3580.9.10 Suspended particulate matter - PM₂ ₅ | ||
| Not applicable | Low volume air sampler (LVAS) | AS 3580.9.9 - Suspended particulate matter - PM₁₀ | ||
| Not applicable | Filter paper | AS 3580.10.1 | ||
| Sample collection - Stack and emissions sampling | Emissions - Industrial | Sulfur oxides; Sulfuric acid mist | Filter/impinger | SA EPA 03.02; USEPA method 8 |
| Cyanide | Impinger | Ektimo 270 | ||
| Fluoride - Water soluble | Filter/impinger | VIC EPA 3142 | ||
| Ammonia | Impinger | Ektimo 260; USEPA method CTM 27 - Ammonia by impinger | ||
| Hydrogen chloride | Impinger | USEPA method 26 - Determination of hydrogen chloride emissions from stationary sources - isokinetic method | ||
| Beryllium; Chromium; Cobalt; Manganese; Nickel; Selenium; Tin; Vanadium | Filter/impinger; Isokinetic | NSW EPA TM-13 | ||
| Antimony; Arsenic; Cadmium; Copper; Lead; Mercury | Filter/impinger; Isokinetic | SA EPA 03.07 | ||
| Aldehydes; Ketones | Impinger | USEPA SW846 method 0011 | ||
| Fluoride - Total | Filter/impinger | USEPA method 13B - Determination of total fluoride emissions from stationary sources (specific ion electrode method); | ||
| Acid soluble particulates; Fluoride - Gaseous | Filter paper - Manual double | AS 3580.13.2 - Determination of fluorides Gaseous and acid-soluble particulate fluorides - Manual double filter paper sampling | ||
| Particulate matter | Filter/impinger; Isokinetic | AS4323.2; ISO 9096; NSW EPA TM-15; SA EPA 03.01 ; USEPA method 5; USEPA method 5B ; USEPA method 17; VDI 2066 | ||
| Sulfur oxides | Filter/impinger | ISO 7934 | ||
| Fluorine; Fluorine compounds | Filter/impinger | NSW EPA TM-9; SA EPA 03.03 | ||
| Oxidants | Impinger | Ektimo 310 | ||
| Bromide; Chloride; Fluoride; Halogens; Sulfate | Impinger | Ektimo 235 | ||
| Oil mist; Organic fumes; Plasticisers | Filter/impinger | Ektimo 355 | ||
| Particulate matter; Principal organic hazardous compounds (POHCs) | Impinger/sorbent tube; Isokinetic | USEPA SW846 method 0010 - Modified method 5 sampling train | ||
| Chlorine | Impinger | NSW EPA TM-7 | ||
| Hydrocarbons: C1-C4; Non-condensable gases; Sulfur compounds | Tedlar bags | Ektimo 200 | ||
| Fluoride | Filter/impinger | Ektimo 240 | ||
| Methylene diphenyl diisocyanate (MDI, isocyanate MDI, diphenylmethane diisocyanate); Toluene-2,4-diisocyanate (2,4-TDI) | Impinger | VIC EPA 4210 ; Ektimo 350 | ||
| Chromium | Filter/impinger; Isokinetic | USEPA method 306 - Determination of chromium emissions from decorative and hard chromium electroplating and chromium anodizing operations - isokinetic method | ||
| Sulfur dioxide | Filter/impinger | ISO 11632; NSW EPA TM-4; USEPA method 6 | ||
| Dioxins; Furans | XAD-2 resin/filter | NSW EPA TM-18; USEPA method 23 - Determination of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans from municipal waste combustors; USEPA method 23A - dioxins, polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofuran | ||
| Hydrogen chloride | Impinger | NSW EPA TM-8 | ||
| Sampling points - Selection | Calculation | SA EPA 03.09; AS 4323.1; NSW EPA TM-1; USEPA method 1 | ||
| Cresol; Phenols | Impinger | USEPA method CTM 32 - Cresols; phenols by impinger | ||
| Antimony; Arsenic; Cadmium; Lead; Mercury | Filter/impinger; Isokinetic | NSW EPA TM-12 | ||
| Cadmium; Mercury | Filter/impinger; Isokinetic | NSW EPA TM-14 | ||
| Volatile organic compounds (VOCs) | Gas bomb; Sampling bag; Sorbent tube | USEPA method 18 - Measurement of gaseous organic compound emissions by gas chromatography; NSW EPA TM-34; VIC EPA 4230 | ||
| Sulfur dioxide | Continuous flow analyser (CFA) | ISO 7935; USEPA method 6C | ||
| Sulfur trioxide (sulfuric anhydride); Sulfuric acid mist | Filter/impinger | NSW EPA TM-3 | ||
| Cresol; Phenols; Resorcinol | Impinger | Ektimo 320 | ||
| Chromium - Total; Chromium VI (hexavalent chromium) | Filter/impinger; Isokinetic | NSW EPA OM-4 | ||
| Hydrogen sulfide | Filter/impinger | Ektimo 255; NSW EPA TM-5; USEPA method 11; VIC EPA B18 | ||
| Particulate matter - PM10 | Filter/impinger; Isokinetic | Ektimo 121 | ||
| Particulate matter; Particulate matter - PM10; Particulate matter - PM2.5 | Cyclone; Isokinetic | USEPA method CTM 40 - Particulate matter - PM10;PM2.5 by cyclone | ||
| Particulate matter - PM10; Particulate matter - PM2.5 | Filter/impinger; Isokinetic | USEPA method 201A; NSW EPA OM-5 | ||
| Polycyclic aromatic hydrocarbons (PAHs) | Dilution/filter/condensation/adsorption - Isokinetic; Impinger/sorbent tube; XAD-2 resin | CARB 429 - Determination of polycyclic aromatichydrocarbon (PAH) emissions from stationary sources; ISO 11338-1; ISO 11338-2; NSW EPA OM-6; USEPA SW-846 method 0010 - Polyaromatic hydrocarbon by XAD-2 resin | ||
| Methanol | Impinger; Sorbent tube | USEPA method 308 - Methanol by impinger/sorbent tube | ||
| Chromium VI (hexavalent chromium) | Impinger | CARB 425 - Chromium - total; hexavalent byimpinger; NSW EPA OM-3 | ||
| Emissions - Industrial; Emissions - Stack | Flow rate; Pressure; Temperature; Velocity | Continuous monitoring | NSW EPA TM-2 | |
| Molecular weight - Dry | Continuous monitoring | USEPA method 3 | ||
| Total reduced sulfides (TRS) | Continuous monitoring | USEPA method 16C | ||
| Flow rate; Velocity | Continuous monitoring | ISO 10780; SA EPA 03.10; USEPA method 2 | ||
| Carbon dioxide (CO2); Oxygen | Continuous monitoring | USEPA method 3A | ||
| Sulfur - Total reduced | Impinger | NSW EPA TM-33; USEPA method 16A - Determination of total reduced sulfur emissions from stationary sources (impinger technique) | ||
| Emissions - Stack | Carbon dioxide (CO2); Molecular weight - Dry | Continuous monitoring | SA EPA 03.08 | |
| Aldehydes; Ketones | Impinger/sorbent tube | ETC 390 | ||
| Carbon monoxide; Nitrogen oxide; Oxygen | Continuous flow analyser (CFA) | USEPA method OTM 13 | ||
| Water vapour | Filter/impinger | VIC EPA 3040 | ||
| Carbon dioxide (CO2); Carbon monoxide; Oxygen | Continuous monitoring | ISO 12039 | ||
| Gaseous organic compounds | Continuous monitoring | USEPA method 25B | ||
| Carbon dioxide (CO2) | Continuous monitoring | NSW EPA TM-24 | ||
| Particulate matter - Condensable | Filter/impinger | USEPA method 202 | ||
| Oxygen | Continuous monitoring | NSW EPA TM-25 | ||
| Volatile organic compounds (VOCs) | Sorbent tube | USEPA method 0030 | ||
| Carbon monoxide | Continuous monitoring | NSW EPA TM-32; SA EPA 03.12; USEPA method 10 | ||
| Vinyl chloride | Gas bomb; Sampling bag; Sorbent tube | USEPA method 106 | ||
| Carbon dioxide (CO2); Carbon monoxide; Nitrogen - Oxides (NOx); Oxygen; Sulfur dioxide | Continuous monitoring | SA EPA 03.14 | ||
| 1,3,5-Trimethylbenzene (1,3,5-TMB, mesitylene); 1-Butylene (1-butene); 2,5-Dimethylbenzaldehyde; 2-Ethoxyethanol (cellosolve); 2-Ethoxyethyl acetate (ethylene glycol monoethyl ether acetate, cellosolve acetate, EGMEA); 2-Methylbenzaldehyde (o-tolualdehyde); 3-Methylbenzaldehyde (m-tolualdehyde); 4-Methylbenzaldehyde (p-tolualdehyde); Acetaldehyde (ethanal); Acrylates and methacrylates: C1-C10; Acrylonitrile; Alcohols: C1-C10; Benzaldehyde (phenylmethanal); Benzene; Butane (n-butane); Butanone (methyl ethyl ketone, MEK, 2-butanone); Butylamine; Crotonaldehyde; Cyclohexanone; Decyl aldehyde (decanal); Dichloromethane (DCM, methylene chloride); Diethyl ether; Dimethylether; Esters: C1-C10; Ethylbenzene; Ethyne (acetylene); Formaldehyde (methanal); Freons; Halogenated hydrocarbons; Heptanal; Hexanal (hexaldehyde); Hydrocarbons: C1-C10; Isobutene (iso-Butene); Mercaptans; Methanol; Methylene diphenyl diisocyanate (MDI, isocyanate MDI, diphenylmethane diisocyanate); Naphthas; Nonanal; Oxirane (ethyleneoxide); Pentanal (valeraldehyde); Polycyclic aromatic hydrocarbons (PAHs); Styrene (ethenyl benzene); Toluene; Toluene-2,4-diisocyanate (2,4-TDI); Toluene-2,6- diisocyanate (2,6-TDI); Trichlorofluoromethane (freon-11, trichloromonofluoromethane); Vinyl chloride; Volatile organic compounds (VOCs); Xylene; n-Butyraldehyde | Gas bomb; Impinger; Sampling bag; Sorbent tube | Ektimo 344 | ||
| Odour | Sampling bag | AS4323.3; NSW EPA OM-7 | ||
| Cyclohexyl amine; Diethylamine; Diisopropyl amine; Dimethylamine; Ethylamine; Isopropylamine; Methylamine; Triethylamine | Sorbent tube | Ektimo 370 | ||
| Volatile organic compounds (VOCs) | Sorbent tube | USEPA method 0031 | ||
| Nitrogen - Oxides (NOx) | Continuous monitoring | USEPA method 7E | ||
| Antimony; Arsenic; Barium; Beryllium; Cadmium; Chromium; Cobalt; Copper; Lead; Manganese; Mercury; Nickel; Phosphorus; Selenium; Silver; Thallium; Zinc | Filter/impinger | USEPA method 29 | ||
| Nitrogen - Oxides (NOx); Sulfur dioxide | Continuous monitoring | USEPA method 20 | ||
| 2,5-Dimethylbenzaldehyde; 2-Methylbenzaldehyde (o-tolualdehyde); 2-Methylpropanal (isobutyraldehyde); 3-Methylbenzaldehyde (m-tolualdehyde); 3-Methylbutanal (isovaleraldehyde); 4-Methylbenzaldehyde (p-tolualdehyde); Acetaldehyde (ethanal); Acrolein (2-propenal); Benzaldehyde (phenylmethanal); Butanone (methyl ethyl ketone, MEK, 2-butanone); Crotonaldehyde; Cyclohexanone; Decyl aldehyde (decanal); Formaldehyde (methanal); Heptanal; Hexanal (hexaldehyde); Nonanal; Octanal; Pentanal (valeraldehyde); Propionaldehyde (propanal); n-Butyraldehyde | Sorbent tube | Ektimo 332 | ||
| Gaseous organic compounds | Continuous monitoring | USEPA method 25A | ||
| Mercury | Sorbent tube | USEPA method 30B | ||
| 1,3-Butadiene; 1-Butylene (1-butene); Butane (n-butane); Dimethylether; Ethane; Ethene (ethylene); Ethyne (acetylene); Isobutane; Isobutene (iso-Butene); Methane; Propane; Propene (propylene); Vinyl chloride; cis-2-Butene; trans-2-Butene | Gas bomb; Sampling bag; Sorbent tube | Ektimo 340 | ||
| Halogens; Hydrogen halides | Filter/impinger | USEPA method 26A | ||
| Nitrogen - Oxides (NOx) | Continuous monitoring | ISO 10849; NSW EPA TM-11 | ||
| 2,5-Dimethylbenzaldehyde; 2-Methylbenzaldehyde (o-tolualdehyde); 2-Methylpropanal (isobutyraldehyde); 3-Methylbenzaldehyde (m-tolualdehyde); 3-Methylbutanal (isovaleraldehyde); 4-Methylbenzaldehyde (p-tolualdehyde); Acetaldehyde (ethanal); Acetone; Acrolein (2-propenal); Benzaldehyde (phenylmethanal); Butanone (methyl ethyl ketone, MEK, 2-butanone); Crotonaldehyde; Formaldehyde (methanal); Hexanal (hexaldehyde); Pentanal (valeraldehyde); Propionaldehyde (propanal); n-Butyraldehyde | Impinger | Ektimo 330 | ||
| Moisture | Impinger | Ektimo 050; NSW EPA TM-22 ; SA EPA 03.13; USEPA method 4; USEPA method ALT 008 | ||
| Gaseous organic compounds | Continuous monitoring | NSWEPA TM-20 | ||
| Emissions; Soil vapour intrusion | Sampling - Area sources | Flux chamber | AS 4323.4; Ektimo130; NSW EPA method OM-8 |
The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.
Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.
Accreditation No.
14601
Site No.
14659
Print date
09 May 2025
END OF SCOPE