SRG Global Asset Care Pty Ltd

Site

Perth NDT and Mechanical Testing Services

Accreditation No.

218

Site No.

508

Date of Accreditation

09 Mar 1965

Address

109 Bannister Road
Canning Vale, WA 6155
Australia

srgglobal.com.au

Contact

Mr Imad Tegmouss P: +61 (08) 92320300

Availability

Services available to external clients

SRG Global Asset Care Pty Ltd address map

Scope of Accreditation

Print scopes
Perth NDT and Mechanical Testing Services

ISO/IEC 17025 (2017)

Infrastructure and Asset Integrity

Service Product Determinant Technique Procedure Limitations
Leak evaluation of welds Metallic storage vessels; Pressure vessels Leakage Differential pressure box ASME V Article 10; API 620; API 650.
Non-destructive testing (NDT) - Electromagnetic testing Metallic surfaces Defect detection and characterisation High frequency eddy current
Non-destructive testing (NDT) - Electromagnetic testing - Specialised - Magnetic flux leakage (MFL) Metallic plate Material loss Not applicable Testing of tank floor with maximum thickness of 20mm, utilising the Silverwing Floormap VS2, Silverwing 3DI, Silverwing HandScan and associated software.
Non-destructive testing (NDT) - Magnetic particle testing Metallic surfaces - Magnetic Defect detection and characterisation AC magnetic flow
Non-destructive testing (NDT) - Penetrant testing Metallic surfaces Defect detection and characterisation Solvent removable; Water washable
Non-destructive testing (NDT) - Radiographic testing Castings - Cast irons, steel and alloy steels; Castings - Non-ferrous metals and alloys; Composite materials; Rolled or wrought aluminium products; Rolled or wrought steel products; Welded joints - Aluminium alloys; Welded joints - Clad and overlaid steel; Welded joints - Copper and copper-nickel alloys; Welded joints - Ferritic materials; Welded joints - Stainless steel, austenitic and duplex materials; Welded joints - Titanium and titanium alloys Defect detection and characterisation Film radiography
Metallic piping; Metallic tubes - Ferromagnetic materials; Metallic tubes - Non-ferromagnetic materials Material profiling; Wall thickness Film radiography
Non-destructive testing (NDT) - Ultrasonic testing Bonded metals; Castings - Cast irons, steel and alloy steels; Castings - Non-ferrous metals and alloys; Rolled or wrought steel products; Welded joints - Ferritic materials; Welded joints - Stainless steel, austenitic and duplex materials Defect detection and characterisation A-scan - Manual
Metallic piping; Metallic plate Material thickness - Spot/grid only A-scan - Manual; Thickness meter
Material loss characterisation; Profiling A-scan - Manual
Non-destructive testing (NDT) - Ultrasonic testing - Specialised - Phased array (PAUT) Bonded metals; Castings - Cast irons, steel and alloy steels; Castings - Non-ferrous metals and alloys; Rolled or wrought steel products; Welded joints - Ferritic materials; Welded joints - Stainless steel, austenitic and duplex materials Defect detection and characterisation Automatic; Manual Semi-automated.
Non-destructive testing (NDT) - Ultrasonic testing - Specialised - Time of flight diffraction (ToFD) Bonded metals; Castings - Cast irons, steel and alloy steels; Castings - Non-ferrous metals and alloys; Rolled or wrought steel products; Welded joints - Ferritic materials; Welded joints - Stainless steel, austenitic and duplex materials Defect detection and characterisation Automatic; Manual Semi-automated.
Non-destructive testing (NDT) - Visual testing - Prior to initial service Rolled products; Welded joints Defect detection Visual testing

ISO/IEC 17025 (2017)

Manufactured Goods

Service Product Determinant Technique Procedure Limitations
Material performance evaluation of metal products Prepared metallic test specimens Hardness Vickers

AS 1817.1, ASTM E384

9.8 to 980 N

Tensile properties Axial tensile; Longitudinal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse butt tensile; Transverse joggle-butt tensile; Transverse tensile; Wedge tensile

AS 1391, ASTM E8M

1 to 1800 kN with control of maximum strain rate

Impact resistance Charpy V-notch - Impact value

ASTM A370, ASTM E23, ISO 148-1, AS 1544.2

at ambient temperature and down to -75°C and at -196°C

minimum specified energy is ≤ 100J for AS 1544.2
Bending properties Not applicable

AS 2505.1, .2, .4

Hardness Rockwell - Scale B; Rockwell - Scale C

AS 1815.1, ASTM E18

Tests using B and C scales

Hardness Brinell

AS 1816.1

4.9 kN to 29.4 kN

Welded test specimens Macroscopic examination Macroscopic examination

AS/NZS 2205 5.1, ASME IX Article I QW183 and QW184, ANSI/AWS D 1.1 Section 4, ISO 17639


Tensile properties All-weld-metal tensile; Tensile tests with control of strain rate, including yield stress and proof stress; Transverse butt tensile; Transverse joggle-butt tensile; Transverse tensile; Wedge tensile

ANSI/AWS D1.1 Section 4, API 1104 Section 5.6.2, AS 1391, AS 2205 2.1, 2.2, ASME IX Article IV QW462, QB451, ISO 4136

1 to 1800 kN with control of maximum strain rate

Impact resistance Charpy V-notch - Impact value

AS 1544.2, AS 2205 7.1, ASTM E23, ISO 9016

at ambient temperature and down to -75°C and at -196°C

minimum specified energy is ≤ 100J for AS 1544.2


Hardness Vickers

AS 1817.1, ASTM E384, ISO 9015-1

9.8 to 980 N

Bending properties Transverse guided bend

API 1104 Section 5.6.4 and 5.6.5, AS/NZS 2205 3.1, AS 2205 3.2, AS 2205 3.3, AS 2205 3.4, ASME IX article IV QW-466 , ISO 5173

Hardness Rockwell - Scale B; Rockwell - Scale C

AS 1815.1

B and C scales

Fillet-break fracture; Fracture test Macroscopic examination; Visual examination


AS/NZS 2205 4.1, ANSI/AWS D1.1 Section 4


Fracture test; Nick-break fracture Macroscopic examination; Visual examination

API 1104 Section 5.6.3, AS/NZS 2205 4.1


The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.