Plumbing Testing Laboratory

Site

Plumbing Testing Laboratory

Accreditation No.

19549

Site No.

22548

Date of Accreditation

24 Oct 2014

Address

Atley Street (cnr Victoria Road)
Malaga, WA 6090
Australia

ptlaboratory.com.au

Contact

Mr Adrian Tang P: +61 (08) 64651888

Availability

Services available to external clients

Scope of Accreditation

ISO/IEC 17025 (2017)

Manufactured Goods

Service Product Determinant Technique Procedure
Products and appliances connected to the water supply - Physical evaluation Baths, sinks and basins; Showers and shower modules Chemical and stain resistance; Crack propagation; Flow rate; Leak tightness; Spread angle; Strength of assembly; Temperature evaluation; Thermal shock resistance; Water absorption Not applicable

AS 3662 (Sections 5.1, 5.2, 5.3, 5.5, 5.6, 5.7, Appendices B, C, D, E, F, G), AS 1976 (Clauses 5.2, 5.3, 5.4 Appendices A,B, C)

Sanitary fixtures - Urinals, water closet pan/suites, bidets, douche seats, cisterns and purpose built bathroom modules Back flow; Capacity; Contaminants; Discharge; Distortion; Endurance; Flow rate; Flush performance; Leakage; Load; Refill time; Seal integrity; Splash; Strength of assembly; Thrust; WettingNULL Not applicable

AS 1172.1 (Sections 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8 Appendices A, B, C, D, E, F, G, H),

AS 1172.2 (Sections 3.5, 4.5, 5.4, 6.4, Appendices A, B, C, D, E, F, G, H, I, J, K, L, M),

AS/NZS 3982 (Section 1.6 Appendices A, B, C, D),

SA TS 100:2018 (clauses 6.1, 9.1.1, 9.1.2, 9.1.3, 9.1.4, 9.1.5, 9.1.6, 9.1.7, 9.1.8, 9.1.9, 9.1.10),

WMTS 517 (clauses 9.1, 9.2, 9.3, 9.4, 9.5)
Tap assemblies; Valves Dimensions; Discharge; Endurance; Flow rate; Leak tightness; Pressure; Strength of assembly; Temperature evaluation; TorqueNULL Not applicable

AS 1357.2 (Sections 3.2, 4.6, 4.7, 4.8, 4.9, 5.3, 5.4, 5.5, 5.6, 5.7, 6.4, 6.5, 6.6, 7.2, 7.4, 7.5, 8.4, 8.5, Appendices E, F, G, H, I, K, L, M, N, O, P),

AS 1432 (Section 5.4.2, Appendix E),

AS 1628 (Sections 4.2, 4.3, 4.4, 4.5, 4.6, Appendices B, C, D),

AS 2419.2 (Sections 4.2, 4.3, Appendices D, E),

AS 2419.3 (Sections 4.2, 4.3, Appendices D, E),

AS 2845.1 (Sections 3.7, 4.5, 5.5, 6.5, 7.4, 8.5, 9.5, 10.5, 11.4, 12.5, 13.4, 14.5, 15.5, 16.5, 17.5, 18.4, Appendices A, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z, AA, BB, CC, DD, EE, FF, GG, HH, II, JJ, KK, LL, MM, NN, OO, PP, QQ, RR, SS, TT),

AS 3952 (Section 5.1),

AS 4032.2 (Clauses 3.3.1, 3.3.2, 3.4, 4.2, 4.4, 4.6 Appendices C, D, F, G - excluding products used in vacuum applications)

AS 4793 (Sections 4.1.2, 4.1.3, 4.1.4, 4.1.5, 4.3.2, 4.1.6),

AS 4794 (Sections 5.1.2, 5.1.3, 5.1.4, 5.2.2, 5.2.3, 5.2.4),

AS 4796 (Clauses 4.4.1, 4.5, 4.6, 4.7, 4.8),

AS/NZS 2638.1 (Sections 5.1.2, 5.1.3, 5.1.4, 5.1.5, 5.1.6, 5.1.7, 5.1.8, 5.1.9, 5.1.10, 5.1.11, 5.1.12, 5.2.2, 5.2.3),

AS/NZS 2638.2 (Sections 5.1.2, 5.1.3, 5.1.4, 5.1.5, 5.1.6, 5.1.7, 5.1.8, 5.1.9, 5.1.10, 5.1.11, 5.1.12, 5.2.2, 5.2.3),

AS/NZS 3718 (Sections 4.3, 4.4, 4.5, 4.6, 4.8, 4.9, 4.10, 4.11, 4.12, 4.13, 4.14, 4.15, Appendices D, E, F, G, H, I, J, K, L, M, N, O, Q, R),

NZS 4522 (Sections 7.2.1, 7.2.2, 7.2.3, 7.2.4, 7.2.5, 7.2.6, 7.2.7, 7.2.8, 7.3, 7.4),

ISO 5208 (Table 1.1),

ATS 5200.012 (Clauses 9.2, 9.4.1),

ATS 5200.030 (Clauses 8.1, 9.2, 9.3, 9.4),

Water service products - Connectors, filters, fittings, hoses and pipes Dimensions; Endurance; Flow rate; Impact resistance; Leak tightness; Load; Pressure; Pressure cycling resistance; Strength of assembly; Thermal cycling; Thread form evaluation; Torque; Visual examination Not applicable

AS 2887 (Clauses 2.6.1, 2.6.2, 2.6.3, 2.6.4, 2.6.5)

AS 2888.1, AS 2888.2, AS 2888.3, AS 2888.4, AS 2888.5, AS 2888.6, AS 2888.7, AS 2888.8, AS 2888.9, AS 2888.10, AS 2888.11,

AS 3688 (Sections 4.2, 4.3, 4.4, 4.5, 4.6, 4.7, 4.8, 4.9, 4.10, 4.11, Appendices D, E, F, G, H, I, J, K, M, N),

AS 4176:1994 (Sections 2.1.1, 2.1.2, 2.1.4, 2.1.5, 2.2.1, 2.2.2, 2.3.1, 2.3.2, 3.1.1, 3.1.4, 3.1.5, 3.1.6, 3.2.1, 3.2.2, 3.2.3, 3.2.4, 3.2.5, 3.3.1, 3.3.2, 3.3.3, 3.3.4, 3.3.5, D, E, G),

AS 4176.8 (Section 7.3, Annexes G, H, I, K),

AS/NZS 1260 (Sections 2.3, 3.2.6, 3.3.1, 3.3.2, 3.3.3, 3.3.4, 3.3.5, 3.4.2, 3.4.3, 3.4.4),

AS/NZS 1462.1, AS/NZS 1462.3, AS/NZS 1462.4, AS/NZS 1462.5, AS/NZS 1462.6, AS/NZS 1462.8, AS/NZS 1462.9, AS/NZS 1462.11, AS/NZS 1462.13, AS/NZS 1462.16, AS/NZS 1462.17, AS/NZS 1462.20, AS/NZS 1462.24,

AS/NZS 1477 (Sections 2.4, 3.3.1, 3.3.2, 3.3.3, 3.3.4, 3.3.6, 3.4.1, 3.4.2, 3.4.3, 3.4.4, 3.5.1, 3.5.2),

AS/NZS 1571 (Section 12),

AS/NZS 2492 (Sections 3.9, 3.10, Tables 3.3, 3.4),

AS/NZS 2642.3 (Sections 12.2, 12.3, Appendices C, D, E, F and torque tests for compliance with Section 11),

AS/NZS 3497 (Sections 5.2, 5.3, 5.4, 5.6)

AS/NZS 3499 (Sections 8.2, 8.3, 8.4, 8.6, 8.7, 8.8, 8.9, Appendices C, D),

AS/NZS 3707 (referenced by AS 3688 Section 4.4 and AS 2642.3 Section 12.2.6),

AS/NZS 4129 (Sections 1.13, 2.4.2, 2.4.3, 2.4.4, 2.4.5, 3.5 [Tables 3.2 and 3.4], 4.4.2, 4.4.3, 4.4.4, 4.4.5, 4.4.6, 6.8 [Table 6.3] Appendices E, F),

AS/NZS 4130 (Sections 10.1, 10.2, 10.4),

AS/NZS 4327 (Sections 3.1, 3.2, 4.1, 4.3.2, 4.3.3, Appendices C, E, F),

ATS 5200.040 (Clauses 6, 8.3, 8.4, 8.5, 8.6, 8.7, 9.1, 9.2, 9.3, 9.4),

ATS 5200.103 (Clauses 9.2, 9.3, 9.4)

EN 12117 (referenced by AS/NZS 4129 Table 3.2),

ISO 7.2

ISO 1167 (referenced by AS/NZS 2492 Table 3.3 and AS 4129),

ISO 2505 (referenced by AS/NZS 2492 Table 3.4),

ISO 3126 (referenced by AS/NZS 4129 clause 3.4.1),

ISO 3459 (referenced by AS/NZS 4129 clauses 2.4.3 and 4.4.2),

ISO 3501 (referenced by AS/NZS 4129 clause 2.4.5),

ISO 3503 (referenced by AS/NZS 4129 clauses 2.4.4 and 4.4.3),

ISO 6259-1 (referenced by AS/NZS 2492 Table 3.3),

ISO 6259-2 (referenced by AS/NZS 2492 Table 3.3),

ISO 10147 (referenced by AS/NZS 2492 Table 3.4),

ISO 13477 (referenced by AS/NZS 2492 Table 3.3),

ISO 13479 (referenced by AS/NZS 2492 Table 3.3),

ISO 13953 (referenced by AS/NZS 4129 Table 6.3),

ISO 13954 (referenced by AS/NZS 4129 Table 3.2),

ISO 13955 (referenced by AS/NZS 4129 Table 3.2),

ISO 13957 (referenced by AS/NZS 4129 Table 3.2),

ISO 18553 (referenced by AS/NZS 2492 Table 3.4),

ISO 14531-1 Annex C (referenced by AS/NZS 2492 Table 3.4),

ISO/TR 10837 (referenced by AS/NZS 2492 Table 3.4)

WMTS 101 (clauses 8.1, 8.3, 9.2, 9.3)
WMTS 103 (Clauses 9.2, 9.3, 9.4)

ISO/IEC 17025 (2017)

Materials

Service Product Determinant Technique Procedure
Metallic corrosion evaluation Copper and copper alloys Dezincification resistance Classical

AS 2345 (Appendix C), AS 4032.2 (Clause 2.6), AS 4793 (Section 2.2)

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.